CDIDI CDLL4784A, CDLL4784, CDLL4783A, CDLL4783, CDLL4782A Datasheet

		• TEMPERATURE COMPENSATED ZENER REFERENCE DIODES																									CDLL4775
		• LEADLESS PACKAGE FOR SURFACE MOUNT																										thru
		• 8.5 VOLT NOMINAL ZENER VOLTAGE +															5%									CDLL4784A
		• LOW CURRENT RANGE: 0.5 TO 1.0 mA
		• METALLURGICALLY BONDED
		• DOUBLE PLUG CONSTRUCTION
	MAXIMUM RATINGS
	Operating Temperature: -65°C to +175°C
	Storage Temperature: -65°C to +175°C
	DC Power Dissipation: 500mW @ +50°C
	Power Derating: 4 mW / °C above						+50°C
	REVERSE LEAKAGE		CURRENT
	lR = 10 A @ 25°C & V				R = 6Vdc
	ELECTRICAL CHARACTERISTICS						@ 25°C, unless otherwise specified.
		CDI		ZENNER	ZENER		MAXIMUM							VOLT			AGE	TEMPERATURE		EFFECTIVE
		TYPE		VOLTAGE	TEST		DYNAMIC		TEMPERATURE		RANGE			TEMPERATURE
		NUMBER			CURRENT		IMPEDANCE		STABILITY								COEFFICIENT
														∆ V													MILLIMETERS					INCHES
				VZ @ I	ZT		I ZT				Z ZT						ZT
																									DIM		MIN	MAX	MIN MAX
														MAXIMUM
																									D		1.60		1.70	0.063		0.067
				(Note 3)					(Note	1)	(Note 2)
																									F		0.41		0.55	0.016		0.022
				VOLTS		mA			OHMS		mV						°C		% / °C						G		3.30	3.70		.130		.146
	CDLL4775			8.5			0.5			200		64						0 to + 75		0.01					G1		2.54 REF.			.100	REF.
	CDLL4775A			8.5			0.5			200		132						-55 to + 100	0.01						S		0.03 MIN.			.001	MIN.
	CDLL4776			8.5			0.5			200		32						0 to + 75		0.005
	CDLL4776A			8.5			0.5			200		66						-55 to + 100	0.005
																												FIGURE 1
	CDLL4777			8.5			0.5			200		13						0 to + 75	0.002
	CDLL4777A			8.5			0.5			200		26						-55 to + 100	0.002
	CDLL4778			8.5			0.5			200		6.4						0 to + 75	0.001					DESIGN DATA
	CDLL4778A			8.5			0.5			200		13						-55 to + 100	0.001
	CDLL4779			8.5			0.5			200		3.2						0 to + 75	0.0005
	CDLL4779A			8.5			0.5			200		6.6						-55 to + 100	0.0005					CASE:		DO-213AA				,Hermetically sealed
	CDLL4780			8.5			1.0			100		64						0 to + 75	0.01
																								glass case. (MELF, SOD-80, LL34)
	CDLL4780A			8.5			1.0			100		132						-55 to + 100	0.01
	CDLL4781			8.5			1.0			100		32						0 to + 75	0.005					LEAD FINISH:				Tin / Lead
	CDLL4781A			8.5			1.0			100		66						-55 to + 100	0.005
	CDLL4782			8.5			1.0			100		13						0 to + 75	0.002
	CDLL4782A			8.5			1.0			100		26						-55 to + 100	0.002					POLARITY:			Diode to be operated with
	CDLL4783			8.5			1.0			100		6.4						0 to + 75	0.01					the banded (cathode) end positive.
	CDLL4783A			8.5			1.0			100		13						-55 to + 100	0.01
	CDLL4784			8.5			1.0			100		3.2						0 to + 75	0.0005					MOUNTING POSITION:								Any.
	CDLL4784A			8.5			1.0			100		6.6						-55 to + 100	0.0005
																								MOUNTING SURFACE SELECTION:
																								The Axial Coefficient of Expansion
																								(COE) Of this Device is Approximately
		NOTE 1		Zener impedance is derived by superimposing on l														ZT A 60Hz rms a.c. current
				equal to 10% of l ZT .																				+6PPM/°C. The COE of the Mounting
																								Surface System Should Be Selected To
		NOTE 2		The maximum allowable change observed over the entire temperature range i.e.,																				Provide A Suitable Match With This
				the diode voltage will not exceed the specified mV at any discrete temperature																				Device.
				between the established limits, per JEDEC standard No.5.
			.
		NOTE 3		Zener voltage range equals 8.5 volts +								5%

22 COREY	STREET, MELROSE, MASSACHUSETTS	02176
PHONE (781)	665-1071	FAX [phone]
WEBSITE: http://www.cdi-diodes.com		E-mail: [e-mail]