CDIDI 1N4627-1, 1N4627, 1N4626-1, 1N4626, 1N4625-1 Datasheet

•	1N4614-1THRU 1N4627-1 AVAILABLE IN	JAN, JANTX, JANTXV AND JANS	1N4614 thru 1N4627
	PER MIL-PRF-19500/435		and
•	LOW CURRENT OPERATION AT 250	A	1N4614-1 thru 1N4627-1

•LOW REVERSE LEAKAGE AND LOW NOISE CHARACTERISTICS

•DOUBLE PLUG CONSTRUCTION

•METALLURGICALLY BONDED

MAXIMUM RATINGS

Operating Temperature: -65°C to +175°C

DC Power Dissipation: 500mW @ +50°C

Power Derating: 4 mW / °C above +50°C

Forward Voltage @ 200 mA: 1.1 Volts maximum

* ELECTRICAL CHARACTERISTICS								@ 25°C, unless otherwise specified.
	JEDEC	NOMINAL		ZENER		MAXIMUM		MAXIMUM REVERSE		MAXIMUM				MAXIMUM
	TYPE		ZENER	TEST			ZENER		LEAKAGE	CURRENT			DC ZENER			NOISE
	NUMBER	VOLTAGE		CURRENT		IMPEDANCE							CURRENT			DENSITY
			V	@ I		I		Z	@ I					1 @ V				l				N		D
			Z	ZT		ZT		ZT	ZT					R		R		ZM
			(Note 1)					(Note 2)
			VOLTS			A		OHMS				A				VOLTS		mA			V/			Hz
	1N4614			1.8		250		1200		7.5					1			120	1
	1N4615			2.0		250		1250		5.0					1			110	1
	1N4616			2.2		250		1300		4.0					1			100	1
	1N4617			2.4		250		1400		2.0						1		95		1								FIGURE 1
	1N4618			2.7		250		1500		1.0					1			90	1
	1N4619			3.0		250		1600		0.8					1			87	1
	1N4620			3.3		250		1650		7.5					1.5			85	1								DESIGN DATA
	1N4621			3.6		250		1700		7.5					2			83	1
	1N4622			3.9		250		1650		5.0					2			80	1
	1N4623			4.3		250		1600		4.0						2		77		1
																											CASE:	Hermetically sealed glass
	1N4624			4.7		250		1550		10.0					3			75	1
	1N4625			5.1		250		1500		10.0					3			70	2								case. DO – 35 outline.
	1N4626			5.6		250		1400		10.0					4			65		4
	1N4627			6.2		250		1200		10.0					5			61	5								LEAD MATERIAL:		Copper clad steel.
* JEDEC Registered Data.
																											LEAD FINISH:		Tin / Lead
	NOTE 1		The JEDEC type numbers shown above have a Zener voltage tolerance of +																					5% of			THERMAL RESISTANCE: (		R		O		JEC ):
			the nominal Zener voltage. Vz is measured with the device junction in thermal equilib																							-
																											250 ˚C/W maximum at L = .375 inch
			rium at an ambient themperature of 25°C + 3°C. A “C” suffix denotes a + 2%																								THERMAL IMPEDANCE: (		Z			JX ): 35
																														O
			tolerance and a “D” suffix denotes a +1% tolerance.
	NOTE 2																										˚C/W maximum
			Zener impedance is derived by superimposing on l ZT														A 60Hz rms a.c. current equal
																											POLARITY:	Diode to be operated with
			to 10% of l			ZT (25	A a.c.)
																											the banded (cathode) end positive.
																											MOUNTING POSITION:		ANY.

22 COREY	STREET, MELROSE, MASSACHUSETTS	02176
PHONE (781)	665-1071	FAX [phone]
WEBSITE: http://www.cdi-diodes.com		E-mail: [e-mail]