CDIDI 1N4933A, 1N4933, 1N4932A, 1N4932, 1N4931A Datasheet

• 19.2 VOLT NOMINAL ZENER VOLTAGE +		5%		1N4916
•	TEMPERATURE COMPENSATED ZENER REFERENCE DIODES			thru
•	LOW NOISE			1N4932A

•METALLURGICALLY BONDED

•DOUBLE PLUG CONSTRUCTION

MAXIMUM RATINGS

Operating Temperature: -65°C to +175°C

Storage Temperature: -65°C to +175°C

DC Power Dissipation: 500mW @ +50°C

Power Derating: 4 mW / °C above +50°C

REVERSE LEAKAGE CURRENT
lR = 15		A @ 25°C & V			R	= 12Vdc
ELECTRICAL CHARACTERISTICS										@ 25°C, unless otherwise specified.
	JEDEC						VOLTAGE							EFFECTIVE		MAXIMUM	MAXIMUM
	TYPE			TEST	TEMPERATURE			TEMPERATURE		TEMPERATURE		DYNAMIC				NOISE
	NUMBER		CURRENT	STABILITY				∆ V	RANGE		COEFFICIENT		IMPEDANCE			DENSITY
				l					ZT								Z			N	D
				ZT													ZT
				(Note 3)				(Note 2)									(Note 1)
																			V
				mA				mV				°C				%/°C	OHMS				√ Hz
	1N4916			0.5				144				+25 to +100				0.01	600	1.0
	1N4916A			0.5				298			-55 to +100					0.01	600	1.0
	1N4917			0.5				72			+25 to +100					0.005	600	1.0
	1N4917A			0.5				149			-55 to +100					0.005	600	1.0
	1N4918			0.5				29			+25 to +100					0.002	600	1.0
	1N4918A			0.5				60			-55 to +100					0.002	600	1.0
	1N4919			1.0				144				+25 to +100				0.01	300	0.5
	1N4919A			1.0				298			-55 to +100					0.01	300	0.5
	1N4920			1.0				72			+25 to +100					0.005	300	0.5
	1N4920A			1.0				149			-55 to +100					0.005	300	0.5
	1N4921			1.0				29			+25 to +100					0.002	300	0.5
	1N4921A			1.0				60			-55 to +100					0.002	300	0.5										FIGURE 1
	1N4922			2.0				144				+25 to +100				0.01	150	0.25
	1N4922A			2.0				298			-55 to +100					0.01	150	0.25
	1N4923			2.0				72			+25 to +100					0.005	150	0.25
	1N4923A			2.0				149			-55 to +100					0.005	150	0.25
	1N4924			2.0				29			+25 to +100					0.002	150	0.25							DESIGN		DATA
	1N4924A			2.0				60			-55 to +100					0.002	150	0.25
	1N4925			4.0				144				+25 to +100				0.01	75	0.22
	1N4925A			4.0				298			-55 to +100					0.01	75	0.22
	1N4926			4.0				72				+25 to +100				0.005	75	0.22							CASE:		Hermetically sealed glass
	1N4926A			4.0				149				-55 to +100				0.005	75	0.22
	1N4927			4.0				29				+25 to +100				0.002	75	0.22							case. DO – 35 outline.
	1N4927A			4.0				60				-55 to +100				0.002	75	0.22
	1N4928			4.0				14				+25 to +100				0.001	75	0.22							LEAD	MATERIAL:		Copper clad steel.
	1N4928A			4.0				30				-55 to +100				0.001	75	0.22
	1N4929			7.5				144				+25 to +100				0.01	36	0.20
	1N4929A			7.5				298			-55 to +100					0.01	36	0.20							LEAD	FINISH:		Tin / Lead
	1N4930			7.5				72			+25 to +100					0.005	36	0.20
	1N4930A			7.5				149			-55 to +100					0.005	36	0.20							POLARITY:			Diode to be operated with
	1N4931			7.5				29			+25 to +100					0.002	36	0.20
	1N4931A			7.5				60			-55 to +100					0.002	36	0.20							the banded (cathode) end positive.
	1N4932			7.5				14				+25 to +100				0.001	36	0.20
	1N4932A			7.5				30			-55 to +100					0.001	36	0.20							MOUNTING		POSITION:	Any.
	NOTE	1	Zener impedance is derived by superimposing on l ZT A 60Hz rms a.c. current
			equal to 10% of lZT .
	NOTE	2	The maximum allowable change observed over the entire temperature range
				i.e.,the diode voltage will not exceed the specified mV at any discrete
			temperature between the established limits, per JEDEC standard No.5.
	NOTE 3			Zener voltage range equals 19.2 volts +											5%.

22 COREY	STREET, MELROSE, MASSACHUSETTS	02176
PHONE (781)	665-1071	FAX [phone]
WEBSITE: http://www.cdi-diodes.com		E-mail: [e-mail]