CDIDI 1N4135, 1N4134, 1N4133, 1N4132, 1N4131 Datasheet

•	1N4099-1 THRU 1N4135-1 AVAILABLE IN	JAN, JANTX, JANTXV AND JANS	1N4099 thru 1N4135
	PER MIL-PRF-19500/435		and
•	LOW CURRENT OPERATION AT 250	A	1N4099-1 thru 1N4135-1

•LOW REVERSE LEAKAGE AND LOW NOISE CHARACTERISTICS

•METALLURGICALLY BONDED

MAXIMUM RATINGS

Junction and Storage Temperature: -65°C to +175°C

DC Power Dissipation: 500mW @ +50°C

Power Derating: 4 mW / °C above +50°C

Forward Voltage at 200 mA: 1.1 Volts maximum

ELECTRICAL CHARACTERISTICS							@ 25°C, unless otherwise specified.
JEDEC	NOMINAL		ZENER		MAXIMUM		MAXIMUM REVERSE		MAXIMUM		MAXIMUM
TYPE		ZENER		TEST		ZENER		LEAKAGE						NOISE		ZENER
NUMBER	VOLTAGE		CURRENT		IMPEDANCE		CURRENT			DENSITY		CURRENT
			V Z @ l ZT		IZT		Z ZT				lR @ V			R		N D @ l ZT						lZM
			(Note 1)				(Note 2)
			VOLTS			A	OHMS			A				VOLTS		V/ √						mA
																	Hz
1N4099			6.8	250			200	10			5.17					40		56
1N4100			7.5	250			200	10			5.70					40		51
1N4101			8.2	250			200	1.0			6.24					40		46
1N4102			8.7	250			200	1.0			6.61					40		44
1N4103			9.1	250			200	1.0			6.92					40		42
1N4104			10	250			200	1.0			7.60					40		38
1N4105			11	250			200	.05			8.44					40		35
1N4106			12	250			200	.05			9.12					40		32
1N4107			13	250			200	.05			9.87					40		29
1N4108			14	250			200	.05			10.65					40		27
1N4109			15	250			100	.05			11.40					40		25
1N4110			16	250			100	.05			12.15					40		24
1N4111			17	250			100	.05			12.92					40		22
1N4112			18	250			100	.05			13.67					40		21
1N4113			19	250			150	.05			14.44					40		20
1N4114			20	250			150	.01			15.20					40		19							FIGURE 1
1N4115			22	250			150	.01			16.72					40		17
1N4116			24	250			150	.01			18.25					40		16
1N4117			25	250			150	.01			19.00					40		15
1N4118			27	250			150	.01			20.46					40		14
1N4119			28	250			200	.01			21.28					40		14
1N4120			30	250			200	.01			22.80					40		13						DESIGN DATA
1N4121			33	250			200	.01			25.08					40		12
1N4122			36	250			200	.01			27.38					40		11
1N4123			39	250			200	.01			29.65					40		9.8
1N4124			43	250			250	.01			32.65					40		8.9						CASE:	Hermetically sealed glass
1N4125			47	250			250	.01			35.75					40		8.1
1N4126			51	250			300	.01			38.76					40		7.5						case. DO – 35 outline.
1N4127			56	250			300	.01			42.60					40		6.7
1N4128			60	250			400	.01			45.60					40		6.4
1N4129			62	250			500	.01			47.10					40		6.1						LEAD MATERIAL:		Copper clad steel.
1N4130			68	250			700	.01			51.68					40		5.6
1N4131			75	250			700	.01			57.00					40		5.1						LEAD FINISH:		Tin / Lead
1N4132			82	250			800	.01			62.32					40		4.6
1N4133			87	250			1000	.01			66.12				40			4.4
1N4134			91	250			1200	.01			69.16				40			4.2						THERMAL RESISTANCE: (		R		O		JEC ):
1N4135			100	250			1500	.01			76.00				40			3.8
																								250 ˚C/W maximum at L = .375 inch
NOTE 1			The JEDEC type numbers shown above have a Zener voltage tolerance of +																		5% of			THERMAL IMPEDANCE: (		Z	O		JX ): 35
																								˚C/W maximum
			the nominal Zener voltage. Vz is measured with the device junction in thermal
			equilibrium at an ambient temperature of 25°C +											3°C. A “C” suffix denotes a + 2%										POLARITY:	Diode to be operated with
			tolerance and a “D” suffix denotes a						+ 1% tolerance.															the banded (cathode) end positive.
NOTE 2
			Zener impedance is derived by superimposing on lZT, A 60 Hz rms a.c. current																					MOUNTING POSITION:		ANY.
			equal to 10% of lZT (25				A a.c.).

22 COREY	STREET, MELROSE, MASSACHUSETTS	02176
PHONE (781)	665-1071	FAX [phone]
WEBSITE: http://www.cdi-diodes.com		E-mail: [e-mail]