MA1804-EA © 2018 CASIO COMPUTER CO., LTD.
User’s Guide 3189/3252
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.
Important!
x This manual provides a brief overview of your watch.
E
For a full Operation Guide and Q&A information about this product, go to the website below. http://world.casio.com/manual/wat/
E-1
Configuring Home City, Time and Date Settings
x Configure Home City and summer time settings first. After that, configure time and date settings.
1.While in the Timekeeping Mode, hold down A until the second’s digits flash on the display, which indicates the setting screen.
2.Press C to move the flashing in the sequence shown below.
Seconds |
DST |
City code |
Hour |
Day |
Month |
Year |
Minute |
3.While the seconds setting is selected (flashing), press D to reset it to 00. If you press D while the seconds setting is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to 29, the minutes count is unchanged.
x While the DST* setting is selected (DST on indicator is flashing), press D to toggle it on (On) and off (OF).
x The DST on/off setting you select for the Timekeeping Mode affects the World Time Mode.
x While the city code setting is selected, use D and B to scroll through the available codes until the one you want to use as your home time city is displayed.
x For full information on city codes, see the “City Code Table” at the back of this manual.
4.While any other setting is selected (flashing), press D to increase it or press B to decrease it. Holding down D or B scrolls at high speed.
5.Press A to exit the setting screen.
E-2 |
E-3 |
|
|
Mode Selection and Operations
x Press C to change the mode.
Timekeeping Mode |
Data Bank Mode |
World Time Mode |
Day Counter Mode |
Alarm Mode |
Stopwatch Mode |
Countdown Timer |
|
|
|
|
|
|
Mode |
C |
C |
C |
|
C |
C |
C |
|
|
|
|
|
|
C |
Turns on illumination. |
|
|
|
|
|
|
E-4 |
|
|
|
|
|
E-5 |
Specifications
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, a.m. (A)/p.m. (P), day, day of the week, month, year
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Full auto-calendar pre-programmed from the year 2000 to 2099 Standard time/Daylight saving time
Other: Home City code (can be assigned one of 30 city codes); Daylight Saving Time (summer time)/Standard Time
Data Bank: 25 records (8-character name, 12-digit number)
World Time: 30 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Day Counter
Number of days between current date and a target date
Memory capacity: 5 counters (8-character text, target date (year, month, day)) Target date setting range: January 1, 1950 to December 31, 2049
E-6
Other: Day counter alarm (DAYS indicator flashes on the display when a target date is reached regardless of year.)
Alarm: 5 Daily Alarms, Hourly Time Signal
Stopwatch
Measuring unit: 1/100 of a second
Measuring capacity: 23 hours, 59 minutes, 59.99 seconds Functions: Elapsed time, split time and two finishes
Countdown Timer
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments) Other: EL backlight, Button operation tone on/off
Battery: One lithium battery (Type: CR1616)
Battery life
3 years under the following conditions
x 2 seconds of backlight operation per day x 10 seconds of alarm operation per day
Specifications are subject to change without notice.
E-7
City Code Table
L-1
Loading...