Canon iP6220D Instruction Guide
Series
Photo Printer
Start Here
6
5
4
3
2
1
5
4
3
2
1
3
2
1
Easy Setup Instructions
1 Unpack the Printer 2 Prepare the Printer 3 Install the FINE Cartridges 4 Align the Print Head (FINE Cartridge)
Carefully remove all items from the box.
PIXMA iP6220D Photo Printer
Power Cord
Remove the shipping tape from the front and back of the
printer.
Open (a) the card slot cover first and (b) the front cover next,
Pull down and remove the protective material on the right
side.
(a) Card slot cover
(b) Front cover
Protective material
Take out the Color FINE Cartridge (CL-51) from its box and remove the protective
tape gently.
Electrical contacts
To the FINE Cartridge holder
Print head nozzles
Protective tape
NOTE:
·Do not touch the electrical contacts or print head nozzles on a FINE Cartridge. The
printer may not print out properly if you touch it.
·Do not reattach the protective tape once you have removed it.
·Handle the removed protective tape carefully to avoid getting your hands dirty or
staining surrounding work area.
Insert the Color FINE Cartridge slightly slanted into the left slot (C).
Open the paper support and pull out the paper output tray.
Paper support
Paper output tray
Pinch the paper guide and slide it to the left. Load a few
sheets of blank paper into the auto sheet feeder, then slide
the paper guide toward the left edge of the paper.
Auto sheet feeder
Print side
Color FINE Cartridge
(CL-51)
Photo FINE Cartridge
(CL-52)
Close the front cover first and the card slot cover next.
Plug the power cord into the back of the printer and connect
the other end to a power outlet.
Press the POWER button. The printer will initialize. Wait until
the POWER lamp remains fully lit.
Power cord
NOTE: Do not connect the USB cable at this stage.
Push up the Color FINE Cartridge until it clicks into place.
IMPORTANT: For correct printer operation, make sure the FINE Cartridge is secure in
slots.
Paper guide
Paper thickness lever
NOTE: Ensure that the paper thickness lever is set to the left
position.
Ensure that the message requesting head alignment is displayed on the LCD, select Yes using the buttons and
then press the OK button.
Documentation and
Software Kit
When the screen appears on the LCD, confirm a language
and then press the OK button.
Open the card slot cover first and the front cover next.
The FINE Cartridge holder automatically moves to the left.
Write down the serial number. You will need this to register
the product.
FINE Cartridge
NOTE: If you leave the printer more than five minutes without
using any button on the operation panel, the LCD goes
into sleep mode automatically. Press the OK button to
turn on the LCD again.
holder
Serial number
Repeat the procedure for the Photo FINE Cartridge (CL-52), inserting it into the
right slot (P).
Close the front cover first and the card slot cover next.
IMPORTANT: Wait until the preparatory operation is complete; this takes about one
to two minutes.
The message requesting head alignment is displayed on the LCD.
Go to the next step.
The pattern is printed. And the print head is aligned
automatically.
IMPORTANT: It takes about four minutes to finish printing.
When automatic print head alignment can not be executed correctly, the message "Auto Head Align has failed.
Press [OK] and repeat operation. <See manual>" is displayed on the LCD. refer to "An Error Message is
Displayed on the LCD" in the Direct Printing Guide.
Continue with Step 5
on side two.
5 Windows
6
5
4
3
2
1
11
10
9
8
7
11
10
9
8
7
6
5
4
3
2
1
®
Printer Driver Installation 5 Macintosh
®
Printer Driver Installation
Windows
The screens below refer to Windows XP Service Pack 2 installation. Screens may differ depending on the operating system
you are using.
TURN THE PRINTER OFF.
You hear the operation sound until the printer is turned off.
It may take about 20 seconds.
Turn the computer on and start Windows.
NOTE:
·Before installing the driver, disable all anti-virus programs
and automatically loading programs.
·For Windows XP or Windows 2000, log on to Windows as a
member of Administrators group before continuing.
·Do not switch users during the installation process.
IMPORTANT: If you see the Found New Hardware Wizard,
click Cancel. Next, remove the USB cable connected to your
computer. Then proceed from step 3 to install the printer
driver.
When the Printer Connection screen appears, connect the USB
cable to the computer and the other end to the printer.
TURN THE PRINTER ON.
Macintosh
NOTE:
·Before installing the driver, disable all anti-virus programs and
automatically loading programs.
®
·Use Mac
·The screens below refer to Mac OS X v.10.3.x installation.
Screens may differ depending on the operating system you are
using.
·Do not remove or insert the USB cable during installation, as this
may result in the computer or printer not operating normally.
OS X v.10.2.1 to 10.3.x.
Connect the end of the USB cable to the computer, the other to
the printer.
When the Easy Install screen appears, click Install.
NOTE: Move the cursor over items to display explanations of
each application bellow.
Read the License Agreement, then click Yes. Installation of
the printer driver, on-screen manuals and applications will
begin.
Follow the instructions displayed on-screen.
Follow the on-screen instructions to register your product.
Insert the Setup Software & User's Guide CD-ROM.
The setup program should run automatically.
When the main menu screen appears, click Easy Install and
follow the on-screen instructions.
NOTE:
·Select Easy Install in order to install application software,
on-screen manual, utility and printer drivers. Select Custom
Install in order to choose the options you would like to
install.
·To install PhotoRecord, click Custom Install and follow the
instruction on the screen.
IMPORTANT: If you cannnot proceed to the next procedure after
two minutes, refer to "Troubleshooting" instructions
in the Quick Start Guide.
If the message asking for your confirmation to restart your computer appears, click OK.
The system is restarted automatically.
Follow the on-screen instructions to install the remaining software. When the Installation Results screen appears, click Next.
Follow the on-screen instructions to register your product.
When the Installation completed successfully screen appears,
click Exit.
If Restart is displayed, ensure the Restart the system now (rec-
ommended) check box is selected, then click Restart.
Turn on your Mac OS X.
Insert the Setup Software & User's Guide CD-ROM.
NOTE:
·If the CD-ROM folder does not open automatically,
double-click the CD-ROM icon on the desktop.
·Log on as an Administrator before continuing.
Double-click the Setup icon.
When the Authenticate screen appears, enter your administrator name and password. Click OK.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
When the Installation completed successfully screen
appears, click
Restart.
After restarting the computer, select Applications from the
Go menu.
Double-click the Utilities folder, and then double-click the
Printer Setup Utility (Print Center when you use Mac OS X
v.10.2.x) icon. Check that your printer name is displayed on
the Printer List. If your printer name is not displayed on the
Printer List, click Add to add the printer.
For details, refer to the Printer Setup Utility Help or Mac
Help.
When the Easy Install screen appears, click Install.
When the main menu screen appears, click Easy Install and follow on-screen instructions.
NOTE: Move the cursor over items to display explanations of
each application below.
Read the License Agreement, then click Yes.
Installation of the printer driver, on-screen manuals, and
applications will begin. Follow the instructions displayed on
the screen.
If the message asking for your confirmation to restart your
computer appears, click OK.
The system is restarted automatically.
Part no. QA7-3644-V02 ©2005 CANON INC. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Printed in Thailand.
NOTE: Select Easy Install in order to install application software,
on-screen manual, utility and printer drivers. Select
Custom Install in order to choose the options you would
like to install.
Loading...