Candy BWM 149PH7 Manual [EN]

Quick Guide Candy Smart Fi+

(procedure for Android smartphones with NFC) - Easy Enrollment

For more information about the connection of your appliance to the App, please visit our website http://simplyfiservice.candy-hoover.com/download. Here you will find additional information about the appliance registration, a complete F.A.Q. and user manuals in the download section.

IMPORTANT

01

02

03

04

This quick guide outlines the steps you should

Make a note of the Wi-Fi Name and Password

follow to enroll your appliance using the App

(WPA/WEP Key) which are normally found on the

Candy simply-Fi if you have a smartphone

back of your Wi-Fi router.

Android equipped with NFC technology. In this

case, the procedure is easier and faster (Easy

NOTE – If you are having trouble locating the

Enrollment).

Wi-Fi Password, please contact your Internet

Provider.

If you are using an iOS or Android device without

NFC technology, please follow the instructions

Please make sure your smartphone is connected

described on the other side of this guide.

to the same Wi-Fi network and the NFC function

Download the Candy simply-Fi App from the

In the homepage, tap on on the appliance that

Insert the purchase date of your appliance (DD/

When you are asked to select the logo shown on

is enabled in the “Wireless & Networks” in the

Store.

you want to enroll and tap on “OK”.

MM/YYYY), then tap on “Proceed”.

the dashboard of your appliance: please tap on

“Settings” menu.

“Smart Fi+”.

NOTE – The App is available for Android (version

NOTE – The activation process of the NFC

4.4 or higher) and iOS (version 8.0 or higher)

function may differ, accordingly to the

devices.

smartphone model and the Android operating

system version. For further details, please check

Open the Candy simply-Fi App and create your

the user manual of your smartphone.

user profile by taping on “Register”. Accept the

privacy policy and fill in the required fields.

NOTE – If you already have a Candy simply-Fi

user profile, you can login using your credentials.

NOTE – You can browse through the functions

of the whole Candy simply-Fi line-up (Smart

Touch, Smart Fi and Smart Fi+) by taping on the

“Demo” button.

05

06

07

A

08

A

If the set up is not successful

It’s important to establish a good Wi-Fi signal

strength between the home router and the

B

appliance: low Wi-Fi signal strength would cause

B

the failure of the final stage of the set up. To

assess if this is the case, start the connection

process again from Step 1; when you get to

Step 7, place with your device (smartphone

or tablet) next to the router and search for

“WIFIWASHMACHINE-xyzk” net generated

by the machine. If this does not come up as an

Remote control mode

Place your device over the “Smart Fi+” logo

If this is not automatically synchronised by the

On the appliance:

Place your device over the “Smart Fi+” logo on

option, it means that the router cannot see the

on the appliance dashboard to get the serial

App, please insert the name of your home Wi-Fi

1) Select “Smart Fi+” position.

the appliance dashboard to allow Wi-Fi network

appliance. In this case, we highly recommend

number. Wait for the data summary screen

network in the first box; insert the password

2) Press, at the same time, depending on the

data transfer. Wait for the confirmation screen

you to bring the router near the machine (if

Load the machine, add the detergent and close

to appear before removing the smartphone

of your home Wi-Fi network in the second box

model you have, these two buttons:

to appear before removing the smartphone (this

possible) or contact your internet provider to

the door. Select the position “Smart Fi+”: the

(this may take a few seconds). Then tap on

and pay attention to the difference between

- “Temperature Selection” and “Start/Pause”

may take a few seconds).

purchase a compatible “Wi-Fi Range Extender”

display will show “on” and you will hear the door

“Confirm”.

lowercase and uppercase.

(Mod. A).

to increase the strenght of the signal.

lock activation. From now on you can manage

The enrollment process is now finished.

- “Prewash” and “Start/Pause” (Mod. B)

your appliance using the App.

NOTE – If you do not know the position of the

Select the type of password (WEP or WPA), then

until “rr” appears in the display.

NFC antenna of your smartphone, slightly move

tap on “Confirm”.

At the end of the cycle, turn off the machine by

it in a circular motion over the “Smart Fi+” logo

On the App - tap on “Next”.

selecting the “OFF” position and wait for the

until the App confirms the data transmission.

release of the lock.

If you have any problems, simply tap on “Any

Problems?” and manually enter the 16-digit serial

number of the appliance that you can find on the

label behind the porthole.

EN IT PT ES NL DE RU FR PL EL CS ZH RO SL SR HR SK

http://simplyfiservice.candy-hoover.com/download

41044950