HD-HG250LAN
FTP Setup Guide
This guide will assist you in setting up the FTP Server on Buffalo’s LinkStation
product. Instructions to setup anonymous and password protected (registered
user) FTP Servers will be shown separately.
Step 1 (Login to the LinkStation):
The first step is to gain access to the LinkStation’s Web Configuration. This is
done by typing http://IP_ADDRESS –OR- http://LINKSTATION_NAME
NOTE: Please refer to the LinkNavigator CD-ROM’s IP Setup Utility if you do not
know the LinkStation’s IP Address or Host Name.
A login prompt will appear. The user name is root and there is NO password by
default. If a password was setup during the initial configuration, then please
enter that password. Press the ‘OK’ button when finished.
Username: root
Password: LEAVE BLANK
Step 2 (Navigate to FTP Server Settings):
Click on the ‘FTP Server Settings’ link on the main status page.
Loading...