VR-MC
Lynnfield VR™ Series
Home Theater
Center Channel Speaker
Specifications
Frequency Response (±3dB) |
65–20,000Hz |
Recommended Amplifier Power |
15–150 watts |
|
|
Nominal Impedance |
8 ohms |
|
|
Sensitivity [1 watt (2.83v) at 1m] |
89dB |
|
|
Bass Unit |
51⁄4" (135mm) copolymer |
Passive Radiator |
51⁄4" (135mm) copolymer |
Tweeter |
1" (25mm) dome with AMD |
|
|
Crossover Frequency |
3,000Hz |
|
|
Dimensions (HxWxD) |
61⁄4 x 191⁄2 x 63⁄4" (159 x 495 x 171mm) |
Weight |
14 lbs (6.5kg) |
|
|
Finish |
Charcoal grey grille cloth with |
|
cherry or black ash wood veneer sides |
|
and solid cherry or black ash wood top |
|
|
Description
The Lynnfield VR-MC center channel speaker delivers the wide-range response, high power-handling, high efficiency and placement flexibility required by the finest home theater systems. Its wide and even dispersion ensures that the sound will remain consistent and uniform for listeners throughout the room, assuring that everyone has the “best seat.”
Placement
Place the center channel speaker above or below the television monitor, as close as possible to the center of the screen. It is not necessary to angle the speaker to face the listeners. The speaker is magnetically shielded with MagnaGuard® and will not affect the television’s picture. Use the four self-adhesive rubber feet (provided) to protect the TV’s finish and reduce vibration.
Connection
WARNING: To prevent an electrical shock hazard, always switch off the amplifier or receiver when making connections to the speaker.
We recommend 18-gauge, or thicker, wire for runs up to 25 feet (8m) and 16-gauge, or thicker, wire for longer runs. Separate the first few inches of the wire conductors. Strip off 1⁄2 inch (12mm) of insulation from the ends of each speaker wire to expose the two conductors and tightly twist the wire strands.
2
Loading...