Bose TV Speaker Service Manual

TV SPEAKER

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety, security, and use instructions.

Important Safety Instructions

Do not ingest battery, chemical burn hazard. The remote control supplied with this product contains a coin/ button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the remote control and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. To avoid risk of explosion, fire or chemical burn, use caution in replacing the battery and replace only with an agency approved (e.g., UL) CR2032 or DL2032 3-volt lithium battery. Properly and promptly dispose of used batteries. Do not recharge, disassemble, heat above 212° F (100° C) or incinerate.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ­amplifiers) that produce heat.

9.Only use attachments/accessories specified by the manufacturer.

10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

11.Unplug this apparatus during lightning storms or when unused for long periods of time.

12.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the ­apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

2 | E N G

IMPORTANT SAFETY INSTRUCTIONS

Warnings/Cautions

This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance instructions in this guide.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

•To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.

•Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the product.

•Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.

•Do NOT make unauthorized alterations to this product.

•Do NOT use a power inverter with this product.

•The speaker wire and interconnect cables included with this system are not approved for in-wall installation. Please check your local building codes for the correct type of wire and cable required for in-wall installation.

•Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

2000m

Use at altitude less than 2000 meters only.

•Only use the following hardware to mount this product: Bose Soundbar Wall Bracket

•Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If you are not sure about installing the bracket, contact a qualified professional installer. Ensure the bracket is installed according to local building codes.

•Due to ventilation requirements, Bose does not recommend placing the product in a confined space such as in a wall cavity or in an enclosed cabinet.

•Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers or other apparatus (including amplifiers) that produce heat.

•The product label is located on the back of the speaker.

3 | E N G

REGULATORY INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation­

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and ISED Canada radiation exposure limits set forth for general population.

This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAN ICES-3 (B)/NMB-3(B)

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance

For Europe:

Frequency band of operation 2400 to 2483.5 MHz:

Bluetooth: Maximum transmit power less than 20 dBm EIRP.

Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.

	Required Power State Information		Power Modes
		Standby		Networked Standby
	Power consumption in specified power mode, at	< 0.5 W		Bluetooth® < 2.0 W
	230V/50Hz input
	Time after which equipment is automatically	< 2.5 hours		2 20 minutes
	switched into mode
	Power consumption in networked standby if all wired	N/A		< 2.0 W
	network ports are connected and all wireless network
	ports are activated, at 230V/50Hz input
	Network port deactivation/activation procedures.	Bluetooth: Deactivate by clearing the pairing list by pressing and
		holding the Bluetooth button for 10 seconds. Activate by pairing with a
	Deactivating all networks will enable standby mode.
		Bluetooth source.

4 | E N G

REGULATORY INFORMATION

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Bose retailer or other qualified professional for removal.

Please complete and retain for your records

The serial and model numbers are located on the back of the speaker.

Serial number: _____________________________________________________________________

Model number: ____________________________________________________________________

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product. You can easily do this by going to global.Bose.com/register

5 | E N G

REGULATORY INFORMATION

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

		Lead	Mercury	Cadmium	Hexavalent	Polybrominated	Polybrominated
	Part Name					Biphenyl	diphenylether
		(Pb)	(Hg)	(Cd)	(CR(VI))
						(PBB)	(PBDE)
	PCBs	X	O	O	O	O	O
	Metal Parts	X	O	O	O	O	O
	Plastic Parts	O	O	O	O	O	O
	Speakers	X	O	O	O	O	O
	Cables	X	O	O	O	O	O
	This table is prepared in accordance with the provisions of SJ/T 11364.

O:Indicates that this toxic or hazardous substance contained in all of the ­homogeneous materials for this part is below the limit requirement of GB/T 26572.

X:Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.

Taiwan Restriction of Hazardous Substances Table

Equipment name: Powered Speaker, Type designation: 431974

				Restricted substances and its chemical symbols
	Unit	Lead			Hexavalent	Polybrominated	Polybrominated
			Mercury (Hg)	Cadmium (Cd)			diphenyl ethers
		(Pb)			chromium (Cr+6)	biphenyls (PBB)
							(PBDE)
	PCBs	-	○	○	○	○	○
	Metal Parts	-	○	○	○	○	○
	Plastic Parts	○	○	○	○	○	○
	Speakers	-	○	○	○	○	○
	Cables	-	○	○	○	○	○

Note 1: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “0” is 2010 or 2020.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North ­Riying Road, China (Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan Phone Number: [phone]

Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. Phone Number: [phone]

Input Rating: 100-240 V 1 50/60 HZ, 36W

Model Number: 431974

The CMIIT ID is located on the product label on the back of the speaker.

6 | E N G

LEGAL INFORMATION

Security Information

This product contains software. Bose may provide updates from time to time, including those to address security issues that may impact product functionality. You are responsible for applying updates for the products you own, and may access them by contacting Bose customer service, visit: worldwide.Bose.com/contact

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license. Other trademarks and trade names are those of their respective owners.

Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc.

Bose, Bose Bass Module, Bose Soundbar Wall Bracket, and Bose TV Speaker are ­trademarks of Bose Corporation. Bose Corporation Headquarters: 1-877-230-5639

©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed, or ­otherwise used without prior written permission.

7 | E N G

LICENSE DISCLOSURES

FreeRTOS Kernel V10.0.1

Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated ­documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ­NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

http://www.FreeRTOS.org

http://aws.amazon.com/freertos

Heatshrink-0.4.1

Copyright (c) 2011-2015 Scott Vokes <[e-mail]>

Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED “AS IS” AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES­ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,

­NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

8 | E N G

CONTENTS
WHAT’S IN THE BOX
Contents..............................................................................................................................	11
SPEAKER PLACEMENT
Recommendations..........................................................................................................	12
Wall mount the speaker................................................................................................	13
Adjust audio for wall mounting.........................................................................	13
SET UP THE SPEAKER
Cable options....................................................................................................................	14
Connect the speaker to your TV...............................................................................	15
Option 1: Optical......................................................................................................	15
Option 2: HDMI™ ARC (not provided)............................................................	16
Connect the speaker to power...................................................................................	17
Turn off your TV speakers............................................................................................	18
Check for sound...............................................................................................................	18
SPEAKER CONTROLS
Remote functions............................................................................................................	19
Power...........................................................................................................................	20
Auto-wake .................................................................................................................	21
Volume.........................................................................................................................	22
Sources........................................................................................................................	23
Dialogue mode.................................................................................................................	24
Adjust the bass.................................................................................................................	25
Reset the bass..................................................................................................................	26

9 | E N G

CONTENTS
BLUETOOTH® CONNECTIONS
Connect a mobile device..............................................................................................	27
Disconnect a mobile device........................................................................................	28
Reconnect a mobile device.........................................................................................	28
Connect an additional mobile device......................................................................	29
Clear the speaker device list.......................................................................................	29
SPEAKER STATUS
Bluetooth status...............................................................................................................	30
Media playback and volume status..........................................................................	31
Update and error status................................................................................................	31
ADVANCED FEATURES
Connect accessories (optional).................................................................................	32
ALTERNATE SETUP
No optical or HDMI port on your TV........................................................................	33
TV only has an analog port.................................................................................	33
TV only has a headphone port..........................................................................	34
CARE AND MAINTENANCE
Replace the remote battery........................................................................................	35
Clean the speaker............................................................................................................	36
Replacement parts and accessories........................................................................	36
Limited warranty..............................................................................................................	36
TROUBLESHOOTING
Try these solutions first.................................................................................................	37
Other solutions.................................................................................................................	37

1 0 | E N G

WHAT’S IN THE BOX

CONTENTS

Confirm that the following parts are included:

Bose TV Speaker

Bose TV Speaker remote	Power cord*
(batteries provided)

Optical cable

* May ship with multiple power cords. Use the power cord for your region.

NOTE: If any part of the product is damaged, don’t use it. Contact your authorized Bose dealer or Bose customer service.

Visit: worldwide.Bose.com/Support/TVS

1 1 | E N G

SPEAKER PLACEMENT

RECOMMENDATIONS

•Place the speaker outside of and away from metal cabinets, other audio/video ­components, and direct heat sources.

•Place the speaker directly below (preferred) or above your TV with the grille facing into the room.

•Place the speaker on its rubber feet on a stable and level surface. For proper­ ­support, both feet must be resting on the surface. Vibration can cause the ­speaker to move, ­particularly on smooth surfaces like marble, glass, or highly polished wood.

•If placing the speaker on a shelf or TV stand, position the front of the speaker as close as possible to the front edge of the shelf or stand for optimal sound quality.

•Keep the back side of the speaker at least 0.4 in (1 cm) from any other surface. ­Blocking the ports on this side affects sound quality.

•Make sure there is an AC (mains) outlet nearby.

•To avoid wireless interference, keep other wireless equipment 1 – 3 ft (0.3 – 0.9 m) away from the speaker.

•For best sound quality, don’t place the speaker in an enclosed cabinet or diagonally­ in a corner.

•Don’t place any objects on top of the speaker.

CAUTION: Do NOT place the speaker on its front, back, or top when in use.

1 2 | E N G

Speaker Placement

WALL MOUNT THE SPEAKER

You can mount the speaker on a wall. To purchase the Bose Soundbar Wall Bracket, contact your authorized Bose dealer.

Visit: worldwide.Bose.com/Support/TVS

CAUTION: Do NOT use any other hardware to mount the speaker.

Adjust audio for wall mounting

On the remote, press and hold the Dialogue mode button 5 for 5 seconds until the TV light on the speaker blinks amber.

1 3 | E N G

SET UP THE SPEAKER

CABLE OPTIONS

Connect your TV to the speaker using one of the two cable options.

•Option 1: Optical

•Option 2: HDMI ARC (not provided)

NOTES: 

•Using your TV’s HDMI ARC or Audio Return Channel port allows you to use your TV remote to control the power, volume, and mute functions of

the speaker.

•If your TV does not have either an Optical or HDMI port see “Alternate Setup” on page 33.

1.On the back of your TV, locate the Audio OUT (optical) or HDMI IN port panels.

NOTE: Your TV’s port panel may not appear as shown. Look for the shape of the port.

OR

HDMI ARC	Optical
(not provided)

2. Choose an audio cable.

1 4 | E N G

Set up the speaker

CONNECT THE SPEAKER TO YOUR TV

Option 1: Optical

1.Remove the protective cap from both ends of the optical cable.

CAUTION: Make sure you have removed the protective cap from both ends of the optical cable. Inserting the plug with the cap on or in the wrong ­orientation can damage the plug and/or the port.

2.Align one end of the plug with your TV’s Optical OUT port and insert the plug carefully.

3.Hold the plug at the end of the optical cable with the Bose logo facing down.

4.Align the plug with the speaker’s OPTICAL IN port and insert the plug carefully.

HDMI IN

OPTICAL IN AUX IN

USB

BASS

POWER

NOTE: The port has a hinged door that swings inward when inserting the plug. 5. Firmly push the plug into the port until you hear or feel a click.

1 5 | E N G

Set up the speaker

Option 2: HDMI ARC (not provided)

1.Insert one end of the HDMI cable into your TV’s HDMI ARC port.

NOTE: If you don’t connect to your TV’s HDMI ARC or Audio Return Channel port, you won’t hear audio from the speaker. If your TV doesn’t have an HDMI ARC port, connect your speaker using the provided optical cable

(see page 15).

2.Insert the other end of the cable into the HDMI IN port on the speaker.

HDMI IN

OPTICAL IN AUX IN

USB

BASS

POWER

1 6 | E N G

Set up the speaker

CONNECT THE SPEAKER TO POWER

1.Connect the power cord to the 1 POWER port on the back of the speaker.

2.Plug the other end of the power cord into an AC (mains) power outlet.

2

HDMI IN

OPTICAL IN AUX IN

USB

BASS

POWER

1

The speaker powers on, and you hear a tone.

1 7 | E N G

Set up the speaker

TURN OFF YOUR TV SPEAKERS

To avoid hearing distorted sound, turn off your TV speakers.

For more information, refer to your TV owner’s guide.

TIP: The audio settings are usually found in the TV menu.

CHECK FOR SOUND

1.Power on your TV.

2.If you are using a cable/satellite box or other secondary source:

a.Power on this source.

b.Select the appropriate TV input.

3.Power on the speaker (see page 20). You hear sound coming from the speaker.

4.Press A on the speaker remote.

You don’t hear sound coming from the TV speakers or speaker.

NOTE: If you don’t hear sound coming from the speaker or do hear sound ­coming from your TV speakers, see page 37.

1 8 | E N G

SPEAKER CONTROLS

REMOTE FUNCTIONS

Use the remote to control the speaker and Bluetooth connections.

Power button (see page 20)				TV button (see page 23)
Volume up (see page 22)				Bluetooth button (see page 27)
Volume down (see page 22)				Adjust bass (see page 25)
Mute/Unmute (see page 22)				Dialogue mode (see page 23)

1 9 | E N G

Speaker controls

Power

On the remote, press the Power button I to power the speaker on/off.

When powered on, the speaker defaults to the last active source.

NOTES: 

•When you plug the speaker into an AC (mains) outlet, the speaker automatically powers on.

•The first time the speaker is powered on, the speaker defaults to the TV gsource.

2 0 | E N G

Speaker controls

Auto-wake

You can set the speaker to power on whenever a sound signal is received.

On the remote press and hold the Power button I until you hear a tone and the TV and Bluetooth­ lights on the speaker blink amber 3 times to switch between ­auto-wake and default power settings.

2 1 | E N G

Speaker controls

Volume

	FUNCTION	WHAT TO DO
	Volume up	Press H.
		NOTE: To quickly increase the volume, press and hold H.
	Volume down	Press z.
		NOTE: To quickly decrease the volume, press and hold z.
		Press A.
	Mute/Unmute	When audio is muted, the light on the speaker of the current source (TV or
		Bluetooth) pulses white until audio resumes (see page 31).
		TIP: You can also press H to resume audio.

2 2 | E N G

Speaker controls

Sources

You can control your TV and Bluetooth connections using your remote.

To control a source, press the button (TV button O or Bluetooth button l) on the remote for the source you want to control.

2 3 | E N G

Speaker controls

DIALOGUE MODE

Dialogue mode improves the clarity of dialogue and vocals in movies, TV programs, and podcasts by adjusting the audio balance of the system.

On the remote, press the Dialogue mode button 5 to switch between ­Dialogue mode and your default audio settings.

When Dialogue mode is enabled, the light for the current source glows green (see page 30).

NOTE: When you enable Dialogue mode, it stays enabled for your current source even if you switch to another source or turn off the speaker. To disable ­Dialogue mode for a source, press the Dialogue mode button 5 again.

2 4 | E N G

Speaker controls

ADJUST THE BASS

1. On the remote, press h.

On the speaker, the TV and Bluetooth lights blink white 3 times.

2.Adjust the bass by doing one of the following:

•Press Volume up H to increase the bass.

•Press Volume down z to decrease the bass.

The TV and Bluetooth lights on the speaker glow to show the current bass setting.

BASS SETTING		O		l
2 (maximum)
1
0 (default)
-1
-2 (minimum)

3.Press h.

The speaker saves the current bass setting.

NOTE: For optimal sound quality for dialogue-only programs, such as news and talk shows, see “Dialogue mode” on page 24.

2 5 | E N G

Speaker controls

RESET THE BASS

On the remote, press and hold huntil the TV and Bluetooth lights on the speaker blink 3 times.

The bass settings reset to original factory settings.

2 6 | E N G

BLUETOOTH CONNECTIONS

Bluetooth wireless technology lets you stream music from mobile devices such as smartphones, tablets, and laptop computers. Before you can stream music from a device,­ you must connect your device to the speaker.

CONNECT A MOBILE DEVICE

1. On the remote, press the Bluetooth button l.

The Bluetooth light on the speaker slowly pulses blue.

2.On your mobile device, turn on the Bluetooth feature.

TIP: The Bluetooth menu is usually found in the Settings menu.

2 7 | E N G

BLUETOOTH CONNECTIONS

3. Select your speaker from the device list.

Bose TV Speaker

Once connected, you hear a tone. The Bluetooth light glows solid white. Bose TV Speaker appears in the mobile device list.

DISCONNECT A MOBILE DEVICE

Use your mobile device’s Bluetooth menu to disconnect from the speaker.

TIP: You can also disable the Bluetooth feature on your mobile device to disconnect. Disabling the Bluetooth­ feature disconnects all other devices­ .

RECONNECT A MOBILE DEVICE

On the remote, press the Bluetooth button l.

The speaker tries to reconnect with the most recently-connected device. When connecting, the Bluetooth light on the speaker blinks white.

NOTES: 

•Make sure the Bluetooth feature is enabled on your mobile device.

•The device must be within 30 ft (9 m) of the speaker and powered on.

2 8 | E N G

BLUETOOTH CONNECTIONS

CONNECT AN ADDITIONAL MOBILE DEVICE

You can store up to eight devices in the speaker device list, and the speaker can ­be ­actively connected to two devices at a time.

NOTE: You can play audio from only one device at a time.

1.On the remote, press and hold the Bluetooth button l until the Bluetooth light slowly pulses blue.

2.On your mobile device, select Bose TV Speaker from the device list.

NOTE: Make sure the Bluetooth feature is enabled on your mobile device.

CLEAR THE SPEAKER DEVICE LIST

1.On the remote, press and hold l for 10 seconds until you hear a tone.

2.Delete Bose TV Speaker from the Bluetooth list on your device.

All devices are cleared, and the speaker is ready to connect (see page 27).

2 9 | E N G

SPEAKER STATUS

The LED lights located on the front of speaker show the speaker status.

TV light Bluetooth light

NOTE: The lights display the current sources highest priority status.

BLUETOOTH STATUS

Shows the Bluetooth connection status of mobile devices.

LIGHT ACTIVITY O l SYSTEM STATE

Bluetooth light slowly					Ready to connect
pulses blue
Bluetooth light					Connecting
blinks white
Bluetooth light					Connected
glows white

3 0 | E N G