Owner’s Guide
Brugervejledning
Bedienungsanleitung
Gebruikershandleiding
Guía del usuario
Käyttöohje
Notice d’utilisation
Manuale di istruzioni
Kezelési útmutató
Brukerveiledning
Podręcznik użytkownika
Bruksanvisning
SOUNDSPORT® FREE
WIRELESS
I M P O R TA N T SA F E T Y I N S T R U C T I O N S
Please read and keep all safety and use instructions. Important Safety Instructions
1. Only use attachments/accessories specified by the manufacturer.
WARNINGS/CAUTIONS
•To avoid accidental ingestion, keep the earbuds away from small children and pets. The earbuds contain a lithium-ion battery, and may be hazardous if swallowed. If ingested, seek immediate medical attention. When not in use, store the earbuds in the charging case with the lid closed, and keep out of reach of small children and pets.
•Do NOT use the earbuds at a high volume for any extended period.
––To avoid hearing damage, use your earbuds at a comfortable, moderate volume level.
––Turn the volume down on your device before placing the earbuds in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
•Use caution and follow applicable laws regarding mobile phone and headphone use if using the earbuds for phone calls while driving. Some jurisdictions impose specific limitations, such as single ear piece configuration, on
the use of such products while driving. DON’T use the earbuds for any other purpose while driving.
•Focus on your safety and that of others if you use the earbuds while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad and follow applicable laws regarding headphone use, etc. Remove the earbuds or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
•Do NOT allow small children to use the earbuds.
•Do NOT submerge or expose the earbuds for extended period to water, or wear while participating in water sports, e.g., swimming, waterskiing, surfing, etc.
•When using this product, basic precautions should always be followed, including the following:
––Read all the instructions before using the charging case.
––To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
––Do not expose charging case to water, rain, liquids or snow.
––Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
––Do not use the charging case in excess of its output rating.
––Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury to persons.
––Do not disassemble the charging case. Incorrect reassembly may result in risk of fire or injury to persons.
––Do not open, crush, or expose a charging case to fire, or excessive temperature. Exposure to fire or temperature above 212° F, 100° C may cause explosion.
––Have servicing performed by a qualified repair person using only identical replacement parts.
2 - E N G L I S H
I M P O R TA N T SA F E T Y I N S T R U C T I O N S
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
•Do NOT make unauthorized alterations to this product.
•Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
•Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
•Wipe off sweat from the earbuds and the charging case before charging.
•IPX4 is not a permanent condition, and resistance might decrease as a result of normal wear.
E N G L I S H - 3
R E G U L ATO RY I N FO R M AT I O N
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antennas or transmitters.
FCC ID: A94BL1R / FCC ID: A94BL1L / IC: 3232A-BL1R / IC: 3232A-BL1L Model: BL1R, BL1L
CAN ICES-3 (B)/NMB-3(B)
Management Regulation for Low-power Radio-frequency Devices
Article XII
According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; if found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Bose retailer or other qualified professional for removal.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance
Frequency band of operation 2400 to 2480 MHz. Bluetooth: Maximum transmit power less than 20 dBm EIRP.
Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.
Please dispose of used batteries properly, following local regulations. Do not incinerate.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
4 - E N G L I S H
R E G U L ATO RY I N FO R M AT I O N
Removal of the rechargeable lithium ion battery in this product should be conducted only by a qualified professional. Please contact your local Bose retailer or see http://products.Bose.com/static/compliance/index.html for further information.
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
|
Lead |
Mercury |
Cadmium |
Hexavalent |
Polybrominated |
Polybrominated |
|
Part Name |
Biphenyl |
diphenylether |
|||||
(Pb) |
(Hg) |
(Cd) |
(CR(VI)) |
||||
|
(PBB) |
(PBDE) |
|||||
|
|
|
|
|
|||
PCBs |
X |
O |
O |
O |
O |
O |
|
|
|
|
|
|
|
|
|
Metal Parts |
X |
O |
O |
O |
O |
O |
|
|
|
|
|
|
|
|
|
Plastic Parts |
O |
O |
O |
O |
O |
O |
|
|
|
|
|
|
|
|
|
Speakers |
X |
O |
O |
O |
O |
O |
|
Cables |
X |
O |
O |
O |
O |
O |
|
This table is prepared in accordance with the provisions of SJ/T 11364. |
|
|
O:Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.
X:Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “7” is 2007 or 2017.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan Phone Number: 886 2 2514 7676
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. Phone Number: +5255 (5202) 3545
The warranty information provided with this product does not apply in Australia and New Zealand. See our website at www.Bose.com.au/en_au/support/policies.html or www.Bose.co.nz/en_nz/support/policies.html for details of the Australia and New Zealand warranty.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.
Apple, the Apple logo, iPad, iPhone, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used with a license from Aiphone K.K. App Store is a service mark of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
Android, Google Play and the Google Play logo are trademarks of Google Inc. Bose Corporation Headquarters: 1-877-230-5639
©2017 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
E N G L I S H - 5
C O N T E N T S |
|
Bose® Connect App |
|
What can I do with the Bose Connect app?.................................................................. |
8 |
What’s in the Carton? |
|
Contents............................................................................................................................................. |
9 |
Sweat and Weather Resistance |
|
Headphones .................................................................................................................................... |
10 |
Headphone Controls |
|
Headphones..................................................................................................................................... |
11 |
Charging case................................................................................................................................. |
11 |
Open charging case..................................................................................................................... |
12 |
Power on............................................................................................................................................ |
13 |
Standby timer......................................................................................................................... |
13 |
Power off............................................................................................................................................ |
14 |
Headphone functions................................................................................................................. |
15 |
Media playback and volume functions.................................................................... |
15 |
Call functions.......................................................................................................................... |
16 |
Secure Fit |
|
Choose the correct StayHear®+ Sport tips..................................................................... |
17 |
Fit the earbud to your ear........................................................................................................ |
17 |
Change the StayHear®+ Sport tips...................................................................................... |
18 |
Battery Charging |
|
Charge the headphones............................................................................................................ |
19 |
Charging time......................................................................................................................... |
20 |
Check the headphone battery level.......................................................................... |
20 |
Charge the case............................................................................................................................. |
21 |
Charging time......................................................................................................................... |
21 |
Check the case battery level......................................................................................... |
22 |
6 - E N G L I S H
|
|
C O N T E N T S |
|
Status Indicators |
|
|
|
Bluetooth® indicators.................................................................................................................. |
|
|
23 |
Charging case battery indicators......................................................................................... |
|
|
24 |
Headphone charging indicators........................................................................................... |
|
|
25 |
Voice Prompts |
|
|
|
Pre-installed languages............................................................................................................. |
|
|
26 |
Check for additional languages................................................................................... |
|
|
26 |
Change the language.................................................................................................................. |
|
|
26 |
Bluetooth Connections |
|
|
|
Connect your mobile device using the Bose® Connect app |
|
||
(recommended)............................................................................................................................. |
|
|
27 |
Connect using the Bluetooth menu on your mobile |
device................................. |
28 |
|
Disconnect a mobile device.................................................................................................... |
|
|
29 |
Reconnect a mobile device..................................................................................................... |
|
|
29 |
Multiple Bluetooth Connections |
|
|
|
Connect an additional mobile device................................................................................ |
|
|
30 |
Identify connected mobile devices..................................................................................... |
|
|
31 |
Reconnect a mobile device stored in the headphone |
pairing list..................... |
31 |
|
Clear the headphone pairing list.......................................................................................... |
|
|
31 |
Care and Maintenance |
|
|
|
Clean the headphones and charging case..................................................................... |
|
|
32 |
Find your lost earbuds............................................................................................................... |
|
|
32 |
Replacement parts and accessories................................................................................... |
|
|
32 |
Limited warranty........................................................................................................................... |
|
|
32 |
Troubleshooting |
|
|
|
Common solutions....................................................................................................................... |
|
|
33 |
E N G L I S H - 7
B O S E ® C O N N E C T A P P
Download the Bose Connect app to keep your software up to date, personalize your headphone settings, easily manage Bluetooth connections and access new features.
What can I do with the Bose Connect app?
•Enable the Find My Buds feature
•Customize your headphone experience: -- Name your headphones
-- Select a voice prompt language or disable voice prompts -- Adjust the standby timer.
•Find answers to frequently asked questions
•Keep headphones up to date with the latest software
8 - E N G L I S H
W H AT ’ S I N T H E C A R TO N ?
Contents
Confirm that the following parts are included:
Bose® SoundSport® Free |
Portable charging case |
wireless headphones |
|
USB cable |
StayHear®+ Sport tips: |
|
Large (black) and small (white) |
|
Note: Medium (gray) tips are attached to |
|
the earbuds. |
Note: If any part of your product is damaged, do not use it. Contact your authorized Bose dealer or Bose customer service.
Visit global.Bose.com/Support/SSF
E N G L I S H - 9
S W E AT A N D W E AT H E R R E S I S TA N C E
Headphones
These headphones are rated IPX4. This means they are sweat and weather resistant. They are not meant to be submerged under water.
CAUTION: Do NOT swim or shower with the headphones. Do NOT submerge the headphones.
Notes:
•To prevent rusting, regularly clean the charging pins on the earbuds with a dry, soft cotton swab or equivalent.
•IPX4 is not a permanent condition, and resistance might decrease as a result of normal wear.
1 0 - E N G L I S H
H E A D P H O N E C O N T R O L S
Headphones
Volume down
|
Multi-function button |
Bluetooth button |
Volume up |
|
Charging case
Case button
E N G L I S H - 1 1
H e a d p h o n e C o n t r o l s
Open charging case
Firmly press the button on the front of the case.
Case button
Note: When you press the case button, the front indicators glow according to the current battery level (see "Charging case battery indicators" on page 24).
1 2 - E N G L I S H
H e a d p h o n e C o n t r o l s
Power on
To power on, remove the headphones from the charging case.
A voice prompt from the right earbud a nnounces the battery level and the Bluetooth indicator on each earbud blinks blue.
Note: To hear the voice prompts, make sure you are wearing the headphones.
Standby timer
The standby timer conserves the battery when the headphones are out of the charging case and not being used. The headphones switch to standby when audio has stopped and you have not pressed any buttons for 20 minutes.
To wake the headphones, press the Bluetooth button on the left earbud and press any button on the right earbud.
Note: To disable the timer or change the number of minutes it takes for your headphones to switch to standby, use the Bose® Connect app.
E N G L I S H - 1 3
H e a d p h o n e C o n t r o l s
Power off
To power off, place the headphones in the charging case.
For information on how to properly store the earbuds, see "Charge the headphones" on page 19.
When an earbud is stored, its corresponding charging indicator glows according to charging status (see "Headphone charging indicators" on page 25).
1 4 - E N G L I S H
H e a d p h o n e C o n t r o l s
Headphone functions
The headphone controls are located on the top of the right earbud.
Media playback and volume functions
Volume down
Multi-function button
Volume up
Function |
What to do |
|
|
Play/pause |
Press |
. |
|
|
|
|
|
Skip forward |
Double press |
. |
|
|
|
|
|
Skip backward |
Triple press |
|
. |
|
|
|
|
Volume up |
Press + . |
|
|
Volume down |
Press - . |
|
|
E N G L I S H - 1 5
H e a d p h o n e C o n t r o l s
Call functions
The right earbud is used as a single headphone for phone calls. This lets you take calls and still hear surrounding sounds.
Microphone
Multi-function button
Function |
What to do |
|
|
|
|
|
Answer a call |
Press |
. |
|
|
|
|
|
|
|
|
|
|
|
End a call |
Press |
. |
|
|
|
|
|
|
|
|
|
|
|
Decline an incoming call |
Press and hold |
for one second. |
|
|
|
|
|
|
|
|
|
|
|
Answer a second incoming call |
While on a call, press |
once. |
|
|
|
|
and put the current call on hold |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Decline a second incoming call |
While on a call, press and hold |
for one second |
. |
|
||
and stay on current call |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
||
Switch between two calls |
With two active calls, double press |
. |
|
|
||
|
|
|
|
|||
Create a conference call |
With two active calls, press and hold |
for one second |
. |
|||
|
|
|
|
|||
|
While not on a call, press and hold |
for one second. |
|
|||
Activate voice control |
Refer to your mobile device owner’s guide for compatibility |
|||||
|
and usage information about this feature. |
|
|
|||
|
|
|
|
|
|
|
Mute/unmute a call |
While on a call, press + and - simultaneously. |
|
|
|||
|
|
|
1 6 - E N G L I S H
S E C U R E F I T
Choose the correct StayHear®+ Sport tips
For optimal audio performance, it is important to choose the correct size StayHear+ Sport tip. Select the size that gives you the best comfort and fit in each ear. To determine the best fit, you may need to try all three sizes. You may need a different size for each ear.
Note: To test the fit, try speaking aloud. Your voice should sound muffled in both ears; if not, select another tip size.
Each StayHear+ Sport tip and earbud is marked with either an L or an R. Be sure to attach the left tip to the left earbud and the right tip to the right earbud.
Fit the earbud to your ear
The StayHear+ Sport tip lets the earbud rest comfortably and securely in your ear. The tip wing fits just under your ear ridge.
1.Insert the earbud so the StayHear+ Sport tip gently rests in the opening of the ear canal.
2.Tilt the earbud back and tuck the tip wing under the ear ridge until it is secure.
Ear ridge
E N G L I S H - 1 7
S e c u r e F i t
Change the StayHear®+ Sport tips
1.Holding the earbud, gently grasp the attached StayHear+ Sport tip and peel it away from the earbud.
CAUTION: To prevent tearing, grasp the StayHear+ Sport tip by its base. Do not pull on the tip wing.
Tip wing
Tip base
2.Align the opening of the new StayHear+ Sport tip with the earbud nozzle and rotate the tip onto the nozzle, then press the base of the tip until it clicks securely into place.
Earbud nozzle
Opening
1 8 - E N G L I S H
B AT T E R Y C H A R G I N G
Charge the headphones
The headphones charge while they are in the case.
1.Align the charging pins on the left earbud with the charging pins on the left side of the case.
Charging pins
Charging pins
2.Place the earbud in the case until it magnetically snaps into place, and the left charging indicator blinks white.
Left charging indicator
3. Repeat steps 1 – 2 to charge the right earbud.
E N G L I S H - 1 9
B at t e r y C h a r g i n g
Charging time
Allow up to two hours to fully charge the headphones.
Note: A full charge of the headphones allows up to five hours of use.
Check the headphone battery level
While using the headphones
•Each time you remove the headphones from the charging case, a voice prompt from the right earbud announces the battery level.
Note: While using the headphones, a voice prompt announces if the battery needs to be charged.
•Check the bottom right corner of the home screen in the Bose® Connect app.
•If connected to an Apple device, the device displays the headphone battery level near the upper right corner of the screen and in the notification center.
While charging the headphones
When an earbud is inserted, its corresponding charging indicator glows according to charging status (see "Headphone charging indicators" on page 25).
2 0 - E N G L I S H
B at t e r y C h a r g i n g
Charge the case
The portable case stores and charges the headphones when not in use.
CAUTION: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
1. Connect the small end of the USB cable into the USB connector.
2.Connect the other end into a USB wall charger (not provided) or computer that is powered on.
Note: Before charging, be sure the headphones are at room temperature, between 41° F (5° C) and 104° F (40° C).
Charging time
Allow up to two hours to fully charge the case. When the headphonesare inside of the case, charging time varies.
Note: When the case is fully charged, you can charge the headphonesup to two times.
E N G L I S H - 2 1
B at t e r y C h a r g i n g
Check the case battery level
Press the button on the front of the case. The battery level indicators glow for three seconds.
The indicators glow according to the battery level as follows:
•If five indicators glow solid, the battery is fully charged.
•If only one indicator glows solid, the battery is low. Charge the battery (see page 19).
Case button
Battery level indicators
2 2 - E N G L I S H
S TAT U S I N D I C ATO R S
Bluetooth indicators
Shows the connection status of a mobile device. Each earbud has a Bluetooth indicator located on the inside surface.
Bluetooth |
Bluetooth |
indicator |
indicator |
Indicator activity |
System state |
Blinking blue |
Ready to connect |
|
|
Blinking white |
Connecting |
|
|
Solid white |
Connected |
|
Note: Once connected, the Bluetooth indicators turn off after |
|
10 seconds. |
|
|
Blinking Green |
Updating system software |
|
|
Solid or Blinking red |
Error - contact Bose customer service |
|
|
E N G L I S H - 2 3
S tat u s I n d i c ATO R S
Charging case battery indicators
Shows the battery charge level of the charging case. Five battery indicators are located on the front of the charging case.
|
Battery level |
|
indicators |
Indicator activity |
Charging percentage |
|
0% - 20% |
|
20% - 40% |
|
40% - 60% |
|
60% - 80% |
|
80% - 100% |
|
Charging error - contact Bose customer service |
|
Battery error - contact Bose customer service |
Note: When charging, the last lit battery indicator blinks white. When the charging case is fully charged, all battery indicators glow solid white.
2 4 - E N G L I S H
S tat u s I n d i c ATO R S
Headphone charging indicators
Shows the charging status of each earbud. Each earbud has a charging indicator located on the front of the charging case and on the inside of the case.
Left charging indicator
Right charging
indicator
Indicator activity |
System state |
Slow blinking white |
Charging |
|
|
Solid white |
Fully charged |
|
Note: When fully charged, the charging indicators glow solid |
|
for a few seconds, then turn off. |
|
|
Fast blinking white |
Error - contact Bose customer service |
|
|
E N G L I S H - 2 5
VO I C E P R O M P T S
Voice prompts from the right earbud guide you through the Bluetooth connection process, announce the battery level and identify connected devices. You can customize voice prompts using the buttons on the right earbud.
Tip: You can also manage voice prompts using the Bose® Connect app.
Pre-installed languages
The following languages are pre-installed on your headphones:
• |
English |
• |
German |
• |
Korean |
• |
Swedish |
• |
Spanish |
• |
Mandarin |
• |
Italian |
• |
Dutch |
• |
French |
• |
Japanese |
• |
Portuguese |
|
|
Check for additional languages
Additional languages may be available. To check for language updates, download the Bose Updater.
Visit: btu.Bose.com
Change the language
When you turn on the headphones for the first time, the voice prompts are in English. To select a different language:
1.Press and hold + and - simultaneously until you hear the voice prompt for the first language option.
2.Press + or - to move through the list of languages.
3.When you hear your language, press and hold to select.
2 6 - E N G L I S H
B LU E T O OT H C O N N E C T I O N S
Bluetooth wireless technology lets you stream music from mobile devices such as smartphones, tablets and laptop computers. Before you can stream music from a device, you must connect the device with your headphones.
Connect your mobile device using the Bose® Connect app (recommended)
1.Power on the headphones (see page 13).
2.Download the Bose Connect app and follow the on-screen instructions.
Once connected, a voice prompt from the right earbud announces “Connected to <device name>" and the Bluetooth indicator on each earbud glows solid white.
Note: To hear the voice prompt, make sure you are wearing the headphones.
E N G L I S H - 2 7
B LU E T O OT H C O N N E C T I O N S
Connect using the Bluetooth menu on your mobile device
1.Remove the headphones from the charging case.
A voice prompt from the right earbud announces “Battery level percent. Ready to connect" and the Bluetooth indicator on each earbud blinks blue.
Note: To hear the voice prompt, make sure you are wearing the headphones.
2.On your mobile device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in the Settings menu.
2 8 - E N G L I S H
B LU E T O OT H C O N N E C T I O N S
3. Select your Bose headphones from the device list.
Once connected, a voice prompt from the right earbud announces “Connected to <device name>" and the Bluetooth indicator on each earbud glows solid white.
Disconnect a mobile device
Turn off the Bluetooth feature on your mobile device.
Tip: You can also disconnect your mobile device using the Bose® Connect app
Reconnect a mobile device
When you remove the headphones from the charging case, they try to reconnect with the most recently connected mobile device.
Note: The mobile device must be powered on and within range (30 ft. or 9 m).
E N G L I S H - 2 9
M U LT I P L E B LU E T O OT H C O N N E C T I O N S
Connect an additional mobile device
You can store up to seven connected devices in the headphones pairing list. Note: You can only connect and play audio from one device at a time.
1.On the left earbud, press and hold the Bluetooth button until the Bluetooth indicator on each earbud blinks blue or until you hear “Ready to connect.”
Note: To hear the voice prompt, make sure you are wearing the headphones.
Bluetooth button
2.On your mobile device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in the Settings menu.
3.Select your Bose headphones from the device list.
Once connected, a voice prompt from the right earbud announces “Connected to <device name>" and the Bluetooth indicator on each earbud glows solid white.
3 0 - E N G L I S H