Engineered Solutions | LECTUS secure readers (Wiegand)
LECTUS secure readers (Wiegand)
www.boschsecurity.com
u 13.56 MHz proximity readers for connecting to
access controllers with Wiegand interfaces
u Suitable for indoor and outdoor use
u Supports multiple technologies (standard iCLASS,
MIFARE®, and MIFARE DESFire® EV1)
System overview
Ideal for new and existing installations, LECTUS
secure readers provide customers the assurance that
their existing investments can be leveraged to enhance
their system as business requirements change.
The technology-independent readers support standard
iCLASS, MIFARE classic, and MIFARE DESFire EV1.
Available with four different form factors LECTUS
secure readers meet nearly all installation
requirements for indoor and outdoor use.
Installation/configuration notes
The maximum cable length for a Wiegand system is
150m.
In order to prevent problems by reading cards with
contact-free card readers, follow the instructions
when planning and installing contact-free readers.
Avoid installing contact-less card readers behind
metallic (i.e. conductive) cases or on metallic surfaces.
The gaps to be left are given in the following list:
• Distance between reader and metal surfaces attached
to the side: min. 30 mm
• Distance between reader and 230 V~ voltage cables
and power packs: min. 500 mm
• Distance between reader and HF-cables: min. 500 mm
u Interoperable with a growing range of technology
environments and form factors
Parts included
Quantity Component
1 Reader body with board
1 Mounting material
1 Installation guide
Technical specifications
Operating Voltage Range 5 to 16 VDC (12 VDC for RS 485)
Input Draw 60 to 220 mA (peak), 16V (see manual
for details)
Environmental rating IP 55
Operating temperature - 35 °C to 65 °C (-31 °F to 150 °F)
Humidity 5 to 95%, no condensation water
Housing Material Polycarbonate (UL 94)
Color Black
Display Mulitcolored RGB LED bar
Panel connection Wiegand, pigtail
2 | LECTUS secure readers (Wiegand)
Card compatibility iCLASS
MIFARE classic serial number
MIFARE DESFire EV1 serial number
(32 bit standard, 56 bit optional)
Operating frequency 13.56 MHz
Typical reading distance
LECTUS secure 1000 WI
1)
7.6 cm (iCLASS SE card)
5.1 cm (MIFARE DESFire EV1 card)
5.8 cm (MIFARE Classic card)
3.3 cm (iCLASS SE key fob)
1.3 cm (MIFARE Classic key fob)
Typical reading distance
LECTUS secure 4000 WI
1)
11.4 cm (iCLASS SE card)
8.4 cm (MIFARE DESFire EV1 card)
8.9 cm (MIFARE Classic card)
4.6 cm (iCLASS SE key fob)
3.8 cm (MIFARE Classic key fob)
Typical reading distance 1)
LECTUS secure 5000 W1
12.7 cm (iCLASS SE card)
5.8 cm (MIFARE DESFire EV1 card)
11.4 cm (MIFARE Classic card)
4.6 cm (iCLASS SE key fob)
3.8 cm (MIFARE Classic key fob)
1)
Typical read range achieved in air. Different types of metal will cause
some degradation (typically up to 20%). Use spacers to space product
off metal and improve read range if required.
Dimension (W x H x D) See ordering information
Weight (g) See ordering information
Ordering information
LECTUS secure 1000 WI
iCLASS/MIFARE reader, mini-mullion size, suited for
mullion-mounted door installations, U.S. single-gang Jbox or any flat surface, pigtail, 4.8 x 10.3 x 2.3 cm,
113g net
Order number ARD-SER10-WI
LECTUS secure 4000 WI
iCLASS/MIFARE reader, wall switch size, designed to
mount and cover single gang switch boxes primarily
used in the Americas, includes a slotted mounting
plate for European and Asian back box spacing, pigtail,
8.4 x 12.2 x 2.4 cm, 220g net
Order number ARD-SER40-WI
LECTUS secure 5000 W1
iCLASS/MIFARE reader, wall switch size, designed to
mount and cover single gang switch boxes primarily
used in the Americas, slotted mounting plate for
European and Asian back box spacing, pigtail, keypad
(4x3), 8.5 x 12.2 x 2.8 cm, 256g net
Order number ARD-SERK40-W1
Accessories
Surface-mount panel for LECTUS secure 1000 WI
readers, 10 items/packaging unit
Order number ARD-R10-AP-G