ProHeat™ ClearView®
U S E R ’ S G U I D E
1699 SERIES - 120V
8905 SERIES - 120V
3
4
5
6-17
18-20 Routine Maintenance
21-22 Troubleshooting
22 |
Consumer Services |
23
24
Thanks for buying a BISSELL ProHeat™ ClearView®
We’re glad you purchased a BISSELL ProHeat ClearView heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your ProHeat ClearView is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your ProHeat Clearview.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions before using your PROHEAT™ CLEARVIEW.™
WARNING: To reduce the risk of fire, electric shock, or injury:
■Do not immerse.
■Use only on surfaces moistened by cleaning process.
■Always connect to a properly grounded outlet.
■See Grounding Instructions.
■Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
■Do not leave machine when it is plugged in
■Do not service machine when it is plugged in
■Do not use with damaged cord or plug
■If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an Authorized Service Center.
■Do not expose to rain, store indoors
■Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces
■Do not carry the appliance while in use
■Unplug by grasping the plug, not the cord
■Do not handle plug or appliance with wet hands
■Do not put any object into appliance openings, use with blocked opening, or restrict air flow
■Do not expose hair, loose clothing, fingers or body parts to openings or moving parts
■Do not pick up hot or burning objects
■Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor
■Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing sub stances, flammable dust, or other explosive or toxic vapors
■Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.)
■Do not modify the 3-prong grounded plug
■Do not allow to be used as a toy
■Do not use for any purpose other than described in this User’s Guide
■Do not operate the appliance unless the belt door is securely assembled in the location provided
■Do not unplug by pulling on the cord.
■Use only manufacturer’s recommended attachments
■Use only cleaning products formulated by BISSELL for use in this appliance
■Keep openings free of dust, lint, hair, etc.
■Do not point attachment nozzle at people or animals.
■Keep appliance on a level surface
■Turn off all controls before unplugging
■Unplug before attaching the Turbo Brush™
■Be extra careful when cleaning stairs
■Close attention is necessary when used by or near children
SAVE THESE INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY. Commercial use of this unit voids the manufacturer’s warranty.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If
it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used
3
|
Keep plenty of genuine BISSELL Advanced |
|
Cleaning Formulas on hand so you can clean |
Trigger |
whenever it fits your schedule. Always use |
|
genuine BISSELL deep cleaning formulas. |
|
Non-BISSELL cleaning solutions may harm |
|
the machine and void the warranty. |
|
Upper |
|
|
|
Handle |
Tool Caddy |
|
|
Crevice Tool |
||
|
Power Cord |
||
3. |
Storage |
||
Power |
Quick Release |
||
|
|||
SmartTemp™ |
Switch |
|
|
|
|
||
Switch |
|
Tough Stain |
|
|
|
||
Tank-in- |
|
Brush Storage |
|
. |
|
||
|
|
||
|
|
4. |
|
|
|
Nuts |
TurboBrush®
Storage
(Select Models)
Handle |
5. |
|
4” Upholstery |
||
Release |
||
Tool Storage |
||
|
1.
SmartTemp™ |
|
|
Ready Light |
Flow Indicator |
|
|
(Filter Inside) |
|
SmartMix® |
Lower |
|
Switch |
||
Handle |
||
|
||
SmartMix® |
|
|
Tank |
|
|
|
ReadyTools™ |
|
|
Dial |
|
DirtLifter® |
Belt Access Door |
|
PowerBrush |
||
|
Floor Nozzle Window |
Accessories
*All items may not be included with your model.
More tools are available. To order replacement parts or tools please refer to page 23.
4” Upholstery Tool |
Tough Stain Brush PreTreat Wand |
(Available on select |
|
models only.) |
(Available on select |
models only.)
Bare Floor Attachment |
Spraying Crevice Tool |
(Available on select models only.) |
(Available on select models only.) |
|
LSIZE |
|
TRIA |
SUCTION BRUSH
Floor Cleansing Formula FOR DEEP
CLEANING MACHINES
EDEP
D
O
W |
Safely Deep Cleans and |
N |
Revitalizes No-Wax Floors |
D |
|
IR |
|
T A N |
32 FL.OZ. |
|
(946 mL) |
TOUGH STAIN |
|
PRECLEANER |
™ |
|
|
Penetrates and Loosens Tough |
Stains |
& Embedded Dirt before Deep Cle aing |
|
|
16 oz. BISSELL |
16 oz. BISSELL |
16 oz. |
16 oz. |
TurboBrush |
™ |
Multi-Allergen |
Fiber Cleansing |
Floor |
Tough Stain |
|
™ |
Formula™ with |
Cleansing |
PreCleaner™ |
|
(Available on select |
Formula with |
||||
models only.) |
|
Scotchgard™ |
Scotchgard™ |
Formula™ |
|
4 |
|
Protection |
Protection |
|
|
How to Use this Guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat ClearView. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your Deep Cleaner.
attention to the product diagram, assemand part names. Locate and organize all
assembly. Familiarize yourself with the parts they go. Following this User’s Guide will
enhance your ability to get the most performance BISSELL ProHeat ClearView for many years.
ClearView comes in three, assemble components.
Handle
Handle
thing you will need to assemble your cleaner is head screwdriver.
WARNING:
Do Not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
1
2
Align Upper Handle holes and Tool Caddy holes.
3.
Place hex nut into back of Tool Caddy and hold in 4. place. Insert bolt from front to back turning into
the hex nut until snug. Do not over tighten. Repeat for the second bolt and hex nut.
5.
6.
7.
6
Snap tools into Storage on the Tool Caddy as shown in figure 6.
Wrap Power Cord and Flex Hose as shown in figure 7.
ProHeat ClearView assembly is
now complete.
7
5
Special Features of Your BISSELL ProHeat™ ClearView®
|
|
|
|
|
The BISSELL SmartClean® System |
|
|
|
|
|
|
The ProHeat ClearView is a home cleaning system that |
|
|
|
|
|
|
automatically mixes hot tap water with the BISSELL |
|
|
|
|
|
|
advanced cleaning formula and heats the solution as |
|
|
|
|
|
|
it is applied to the carpet. The combination of heated |
|
|
|
|
|
|
cleaning solution, powered brush and suction provide a |
|
|
|
|
|
|
safe & effective method of cleaning. |
|
|
|
|
® |
|||
|
|
|
|
|
heats the cleaning |
|
|
|
|
|
|
carpet (*) to safely |
|
|
|
|
|
|
the machine; both |
|
1. |
||||||
|
|
to work. |
||||
|
|
|
|
|
the back of the handle |
|
2. |
|
|||||
|
|
choose not to use the |
||||
|
|
|
|
|
delicate wool or |
|
|
|
|
|
|||
|
|
|
|
|
solution for carpet |
|
|
|
|
|
|
. It does not heat |
|
|
|
|
|
|
tools. |
|
|
|
|
|
|
when the heater |
|
|
|
3. |
|
|
||
|
|
|
|
on two minutes before |
||
|
|
|
|
|
and ready to clean. |
|
|
|
|
|
|
on the front of the |
|
|
|
|
|
|
you clean |
|
|
|
|
|
|
25° and will |
|
4. |
|
|
||||
|
|
|
||||
|
|
|
® |
|||
|
|
|
|
|
|
|
1. |
|
|
|
|||
|
|
|
|
|
||
2. |
|
|
fill the bottle to the |
|||
|
|
|
|
. |
3. |
. |
|
6
SmartTemp Ready Light
Power Switch
SmartTemp
Switch
ON
OFF
SmartMix bottle
SmartMix Continued
concentrate bottle.
4.
leaks, check for proper positioning of o-ring and straw.
Choose the SmartMix setting that fits the cleaning job.
5.
Water Rinse - use for gentle cleaning or for the final rinse after cleaning.
Normal- automatically provides the best mix of water and concentrate for most cleaning jobs.
High Traffic- automatically mixes the right amount of water and concentrate to dissolve tough grime and heavy soil. Note: Residual cleaning materials left in carpet from other products may cause excessive foaming when picked up. If foam is overflowing tank, move SmartMix dial to “Water Only” position until the condition stops.
Note: Both the SmartMix Bottle and the clean water tank must have liquid in them
in order for the machine to spray. If one tank is empty, the machine will
temporarily lose its prime and not apply either cleaning solution or water only.
Important: If you are using the WATER RINSE setting, fill the Smart Mix bottle with water also!
DirtLifter® PowerBrush |
The pow- |
|
ered |
brush roll at the floor nozzle is designed to enhance cleaning performance. The bristle pattern lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights and protects your carpet if you leave the power switch ON. When the machine handle is in the fully upright position, CarpetSaver automatically raises the brush off the carpet.
O-ring
Position
When filling bottle or storing unit, set
dial to:
SmartMix
|
|
H |
IC |
|
L |
|
S |
E |
|||
|
|
F |
|
|
A |
IN |
|
||||
IG |
AF |
|
|
M |
|
|
|
||||
H |
T |
R |
|
O |
R |
E |
R |
R |
|
|
|
|
|
|
N |
|
AT |
|
|
|
|
||
|
|
|
W |
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
WARNING:
To
.
is
WARNING:
To reduce the risk of fire, use only BISSELL Deep Cleaning Formula in your ProHeat ClearView. Use of cleaning formulas which contain lemon or pine oil may damage this appliance and void warranty. Chemical spot cleaners or solvent based soil removers should not be used. These products may react with the plastic materials used in your ProHeat ClearView, causing cracking or pitting.
7
Tank-in-Tank
Our Tank-in-Tank system is designed with a Bladder inside for clean water. As you clean, the Bladder will empty. Dirty water collects in the tank outside the Bladder.
lay the machine handle
1.
Lift the Tank-in-Tank handle. The handle locks the 2. lid in place.
Carry it like a bucket to fill at the sink.
3.
Note: You may notice hair and debris deposits on the carpet that were loosened by the brushing action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away. Debris that deposits in the Brush Belt should be cleaned between uses to keep the Belts running free.
Set the tank down and rotate the handle forward to unlatch 4. the lid. Lift off and set the lid aside.
Find the mouth of the Bladder and fill to the bottom of the 5. neck with clean hot tap water. *Do not boil or microwave
water as it can destroy the Bladder.
Note: Fill the Bladder with clean hot tap water only.
Replace the Tank Lid matching the lid and tank edges. Handle 6. must be in the forward position to reinstall.
Rotate the handle to the carrying position to re-latch 7. the lid.
Replace tank in machine base, seating firmly in place.
8.
Rotate handle back down to the latched position.
9.
Note: Both the SmartMix Bottle and the clean water tank must have liquid in them in order for the machine to spray. If one tank is empty the machine will not apply either cleaning solution or water.
Important: If you are using the WATER RINSE setting, fill the SmartMix bottle with water also!
Handle to
Unlatch
only with tap water
Latched
8