User Guide X430
3rd edition (rev. 2)
www.binatonegps.com
Binatone Navigation software
IMPORTANT
IMPORTANT
Satellite signals are required for this product to function in Navigation Mode. There may be occasions within your home or surrounding area when the signal strength is limited and Navigation may not be possible.
This is quite normal for products of this type. If you experience difficulty in receiving a signal in your car you may need to use an external antenna (optional).
You can check the number of satellite signals that the unit is receiving and the strength of those signals by viewing the GPS Receiver.
If you need help....
The Help line is available from 9:00am to 5:00pm, Monday to Friday, on 0845
345 9677 Calls are charged al Local Call rate (for UK only)
Unpacking your Binatone Navigation System
X430 3rd edition
In the box you will find
·GPS navigation device ·Car mounting kit ·In-car charger
·USB cable ·Stylus pen ·User guide
Keep the packaging materials in a safe place in case you later need to transport the unit. Keep your sales (till) receipt, which is your guarantee. Before you can use the unit, you’ll need to fully charge the battery as described on page 6, please also read the notes on the page 2.
WARNING:
Your GPS device operates under open sky conditions in order to receive a satellite signal. Please ensure that you are not using the device indoors or in areas where the satellite signal is weak.
For the first time of use or after a few days of no use, it may take up to 10 minutes to acquire a satellite signal. It is recommended to be stationary during the start up process.
*USB cable can be either used to charge your device with you computer or update your system (latest map and software, latest safety camera information) via your computer and the internet (updates are payable). Charging via USB cable will be faster when the unit is powered off.
1 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
SAFETY
Safety
The Global Positioning System
The Global Positioning System (GPS) is a satellite based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America, who are responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of you Binatone Carrera Personal Navigation Device (PND).
Using Your PND in the Car
When using your PND while driving it is essential that you drive with due care and attention. Never modify the settings or program you PND while driving. Only look at the PND map when it is safe to do so. When mounting the PND in your car make sure that it does not obscure your view or impede the operation of any driving controls.
Prohibited Areas
Do not operate your PND in hospitals or near any electrical medical equipment.
Do not operate your PND in aircraft.
Do not operate while sat in a petrol station forecourt.
Battery
Your PND uses a Li-ion battery. Do not use it in humid, wet or corrosive environments. Do not operate or store your PND in high temperatures (>60 ) or in direct sun light. Do not pierce or break the battery casing.
Failure to follow these cautions will invalidate the warranty and may cause the battery to leak acid, become hot, explode or ignite and cause injury or damage.
If you come into contact with leaked battery acid wash the contact area thoroughly and seek medical attention.
The Li-ion battery contained in this unit must be recycled or disposed of properly.
Do not dispose of in household waste or burn.
2 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
CONTENTS
CONTENTS
Important………………………………………………………………………. 01
In the Box ……….………………………………………………………... 01
Safety …………………………………………………………………………… 02
The Global Positioning System ……………………………………………02 Using Your PND in the Car .…………………………………………….. 02
Prohibited Areas .…………………………………………………….…… 02 Battery..…………………………………………………………………….. 02
Contents .………………………………………………………………………. 03
Quick Start Guide …………………………………………………………… |
05 |
Position of the Controls ………………………………………………… |
05 |
Charging the Battery ……………………………………………………. 06 |
|
SD Memory Card ………………………………………………………... 06 |
|
Car Adaptor ……………………………………………………………… |
06 |
Turning the Sat Nav Unit On/Off ……………………………………….. 07 |
|
Turning the Sat Nav Unit Off (Sleep Mode) .………………………….. 07 |
|
System Reset ……………………………………………………………. |
07 |
Windscreen Holder Installation ………………………………………… |
08 |
Getting Started …….…………………………………………………………. 09 Starting Up ... ……………………………………………………………… 09 Settings ……………………………………………………………………. 10
Multi-Media ………………………………………………………………… 11
Picture Viewer..……………………………………………………... 11 Document Viewer …………………………………………………... 12 GPS Receiver ……………………………………………………………… 12 External Antenna (sold separately)………………………………………. 13
Additional maps and upgrades …………………………………………… 13
INTRODUCTION……………………………………………………………….. 14
Navigate to .…………………………………………………………………… 17
Entering your Waypoints/destination ………………………………….. 18 Address ……………………………………………………………... 18 POI (Points of Interest).……………………………………………. 20
POI Near You ………………………………………………………. 20
POI in City …………………………………………………………... 21 Favourites …………………………………………………………… 22 Recent Destinations………………………………………………... 22
Map …………………………………………………………………... 23 Browse Map Options …………………………………………… 23
Zoom to Address ……………………………………………….. 23 View POI ………………………………………………………… 23 Zoom to Current Pos ………………………………………….. 23
Night/Day ………………………………………………………. 23 3D/2D Map View ………………………………………………. 24 Show Trace Record …………………………………………… 24
Coordinates…………………………………………………………. 25
3 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
CONTENTS
Navi/Simulate …………………………………………………………….. 26
Navigation Screen…………………………………………………... 27 Navigation Options…………………………………………………. 28
View Route ……………………………………………………… 28 Navi Settings…………………………………………….……... 28 Save Map View………………………………………………… 30
Night/Day ……………………………………………………….. 30 3D/2D …………………………………………………………… 30
Brightness….…………………………………………………… 30 Volume …………………………………………………………. 30 Road Block……………………………………………………... 30
Trace Record…………………………………………………… 30 GPS Status ……………………………………………………. 30
Main Menu.……………………………………………………… 30 Simulation Screen…………………………………………………... 31 View Route ……………………………………………………... 31
Simulate.………………………………………………………… 31 Back …………………………………………………………….. 31 GO .……………………………………………………………… 31 Route Options………………………………………………….. 32 Driving Method………………………………………….. 32
Routing Style .…………………………………………. 32
Routing Parameters……………………………………. 32
Go Home……………………………………………………………………….. 33
Edit Favourites ………………………………………………………………. 33 Add………………………………………………………………………... 33 Edit………………………………………………………………………… 34 On Map.…………………………………………………………………… 34
Recent Destinations ……………………………………………………… 34
View Map …………………………………………………………………….. 35
Settings ……………………………………………………………………….. 36
Language…………………………………………………………………. 36 Set Home Address………………………………………………………. 36
Units ………………………………………………………………………. 36 Brightness………………………………………………………………… 36
Volume ……………………………………………………………………. 37 About ……………………………………………………………………… 37
GPS Status …………………………………………………………………… 37
Time Zone Setting ………………………………………………… 38
Safety Cameras …………………………………………………………… 38
Frequently asked questions ………………………………………… 39
Technical Specifications ………………………………………………. 40
4 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
QUICK START GUIDE
Quick Start Guide
Please make sure that your read all of the information contained within this user guide before operating this unit.
If you experience any problems, please go through the user guide before contacting the customer helpline.
Position of the controls
1.Touch Screen
2.Charge Indicator – Displays the battery charging status. Red; charging, Green; fully charged.
3.On/Off Switch – Turn the unit On/Off using this switch, if the unit is not to be used for long periods of time.
4.Reset – System reset switch.
5.Speaker – For voice guidance instructions.
6.External Antenna Connection Port – Connect an external antenna when used in vehicles with a heat reflecting windscreen. (External antenna sold separately).
7.Stylus Pen – Use to input data or select items.
8.Memory Card Slot – For use with SD type cards. Do not remove memory card while in use.
9.Headphone Jack – Connects to external headphones.
10.DC Power Connection Port – For charging.
11.USB connector – For data transfer and charging.
12.TMC Port – Traffic Message Channel dongle connection point. (not supported in this model)
13.Sleep mode Button – Switches the unit In/Out off sleep mode, handy when stopping for short periods to conserve battery power.
5 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
QUICK START GUIDE
Charging the Battery
Before using your PND for the first time, we recommend you to charge the unit for 5 hours via the USB cable or 2 hours via the car charger in order to charge the battery.
Plug the USB cable into the USB socket 
.
Or connect the car charger to the DC socket.
The red charging indicator on the front of the unit will light up. When the unit is fully charged the red light will turn green.
When you use the PND in you car, we recommend that you always use the car charger in order to maintain the battery level.
* The USB cable is provided for future operations and it is not for your system to operate at present.
If you have a SD memory Card, you may install it refer to the picture
(below)
Switch the unit off first before installing or removing the SD card.
When installing it can only be fitted one way – contacts towards you and the cut-off corner at the top. Slide the card in and push it in so that it clicks in place.
Once the card is installed it does not need to be removed.
If you need to remove the card, push the card in and it will eject from the slot.
Car Adapter
When using your PND in the car we recommend that you always use the in-car charger to power the unit, especially on long journeys.
Plug the in-car charger into the DC power socket of the unit. Pug the other end of the adapter into the car’s cigarette-lighter / 12V DC socket.
6 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
QUICK START GUIDE
Turning the Sat Nav Unit On/Off
To switch the unit On slide the power switch located on the side of the unit to the On position, the unit will power up and display the warning screen.
To switch the unit Off slide the power switch to the Off position.
Turning the Sat Nav Unit Off Via Sleep Mode
Press and hold down the sleep button on the top of the unit, after about 3 seconds the unit will enter sleep mode. Press and hold the button again, to bring the unit out of sleep mode. When brought out of sleep mode the unit will show the same screen as when the unit entered sleep mode.
If the unit is not to be used for a long period of time it is advised that you slide the power switch on the side of the unit to Off.
System Reset
Under extreme circumstances it may be necessary to reboot the system. Reset the system if the following situation occurs:
•Long delay experienced with screen refresh rate or operation, resulting in an inoperable unit.
•The system will not turn Off with the power button.
•No response with selection made on the screen.
The reset button can be found on the back of the unit. Insert the tip of the stylus pen into the reset switch in order to press. The system will be immediately reset.
7 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
QUICK START GUIDE
Windscreen Holder Installation
The car mount has a suction pad that fits to the windscreen or a flat area on the dashboard.
A. Fitting to windscreen
Pull the lever away from the suction pad. Place the pad on the widescreen and push the lever towards the pad until it clicks into place.
B. Fitting the holding bracket
It is best to fit this to the unit before it is attached to the windscreen.
With the lever facing down, slide the bracket onto the four securing lugs on the end of the car mount, making sure that the top of the bracket is no located on the same side as the lever.
C. Fitting the Unit
Slide the unit into the bottom of the bracket and carefully push the unit up until it clicks into place at the top.
To remove the unit from the car mount; Press and lift the tab at the top of the bracket then pull the unit forward and up out of the bottom of the bracket.
To remove the Car mount from the windscreen; Lift the lever away from the windscreen, then gentle pull the tab on the suction cup to release the suction as you pull the mount away from the windscreen.
8 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
GETTING STARTED
Starting Up
Turn the on/off button to ON.
The following screens will be displayed:
When you press MENU, the following screens will be displayed:
9 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
GETTING STARTED
Settings
NOTE: You do not need to enter the SETTINGS menu before you start to navigate. If you press on the SETTINGS icon the following screen is displayed.
To exit this page or exit any subsequent page, press the cross at the top of the screen.
Volume
Press ’volume’ you can modify the volume level of the voice prompts. You can increase or decrease the level by clicking “ 
” or “ 
”. This can also be done via the navigation software later.
Backlight
Press ‘Backlight’ to change the brightness of the screen. You can make it darker or brighter by clicking “ ” or “ ”. This can also be done via the navigation software later.
Time & Date
This device can auto-set the current date and time by receiving three GPS signals.
However you can also change it by yourself by
1.) |
Click |
|
|
2.) |
Clicking on |
and |
to scroll to the right year, month, date, time and time |
format. Note: the unit does not save the time & date when the unit is switched off, this is because the unit automatically sets the time & date from the satellite signals.
Power
The power page contains the information of your battery level.
Language
Press ”Language” to change the language by clicking << and >>
About
The About page contains information about your software version.
It also allows you to default the unit or to calibrate the screen to your touches.
The unit will be returned to how it was when it left the factory. After selecting this option you will be asked to confirm.
10 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
GETTING STARTED
Default
Reset to factory default settings.
Calibrate
This function calibrates the unit to respond to your screen taps. You will need to use this function only if the unit begins to respond inconsistently to your screen taps, then follow the on screen dissections. Once the calibration has been completed, press anywhere on the screen to return to the previous menu.
Multi Media
NOTE: if you press on the MULTI MEDIA icon the following screen is displayed.
Picture Viewer
This device supports, .bmp and .jpg file formats only (recommended picture size for optimum usage: 500kb – it is not recommended to view pictures over 2mb). Press the “Picture viewer” to show a list of names for all the picture files then click on the file you want to view.
To view pictures (bmp and jpeg formats only):
1)Copy all the pictures you want to view onto a SD card.
2)Insert your SD card into the PND.
3)Select Multi Media and then Picture viewer a list of pictures or folders containing pictures will be shown.
4)Click on folder to open it and then click on a picture to load it into the viewer. The following screen will be shown:
11 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
GETTING STARTED
Document Viewer
This device supports, txt file format viewing only. Press the “Doc Viewer” to show the list of files available for viewing. The procedure for viewing documents is the same for viewing pictures. But once loaded the following screen will be shown.
GPS Receiver
NOTE: This page is for information only. You can view the number of satellite signals the unit is receiving also the strength of these signals.
This page gives your current position in degrees longitude and latitude, your current speed and the status of your position, i.e. Fixed 3D or Fixed Invalid etc.
The compass circle shows the satellites that the unit is receiving and the bar chart below
To exit this page, press on the centre arrow.
12 |
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) |
Loading...