Quick Start Guide
EURORACK EARS (70 HP/80 HP)
19" Rack Ears for 70 HP/80 HP Eurorack Chassis
Rack Ears
Rack Ears
Do not remove wooden side panels
Behringer MODEL D
Use existing screws x 4 and tighten the Rack Ears securely to the synthesizer
Behringer MODEL D (not supplied)
3U
370 mm (14.57")
483 mm (19")
Behringer NEUTRON (not supplied)
3U
421 mm (16.56")
483 mm (19")
EURORACK EARS (70 HP)
Use with Behringer 70 HP wide EURORACK equipment, such as: MODEL D
EURORACK EARS (80 HP)
Use with Behringer 80 HP wide EURORACK equipment, such as: NEUTRON
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners.
Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, China
!Important Safety Information
CAUTION: The power switch of the equipment being rack mounted should always remain readily accessible and operable.
Loading...