Asus N10E, N10Jc, Z91A, N10E-A1, N10J-A2 Hardware User Manual

Notebook PC

Hardware User’s Manual

EXPRESS

E4055/ August 2008

2

Contents

Table of Contents

1. Introducing the Notebook PC

About This User’s Manual ��6

Notes For This Manual �� 6

Preparing your Notebook PC�� 9

2. Knowing the Parts

Top Side��12 Bottom Side ��15 Left Side ��18 Right Side ��20 Rear Side��22 Front Side ��22

3. Getting Started

Power System ��24

Using AC Power �� 24 Using Battery Power �� 25 Battery Care �� 25 Powering ON the Notebook PC �� 26 The Power-On Self Test (POST) �� 26 Checking Battery Power �� 27 Charging the Battery Pack ��27 Power Options �� 28 Power Management Modes ��29 Sleep and Hibernate �� 29 Thermal Power Control ��29

Special Keyboard Functions ��30

Colored Hot Keys �� 30 Microsoft Windows Keys �� 32 Keyboard as a Numeric Keypad �� 32 Keyboard as Pointers ��32

Switches and Status Indicators �� 33

Switches��33

3

Contents

Table of Contents (Cont.)

Status Indicators �� 34

4. Using the Notebook PC

Pointing Device��38

Using the Touchpad �� 38 Touchpad Usage Illustrations �� 39 Caring for the Touchpad �� 40 Automatic Touchpad Disabling (Synaptics) �� 40

Storage Devices �� 41

Expansion Card �� 41 Optical Drive (external) �� 43 Flash Memory Card Reader ��46 Hard Disk Drive �� 47 Memory (RAM)��48

Connections��49

Network Connection ��49 Wireless LAN Connection (on selected models) ��50 Windows Wireless Network Connection �� 51 Bluetooth Wireless Connection (on selected models) �� 52

Trusted Platform Module (TPM) (on selected models) ��53

Appendix

Optional Accessories �� A-2

Optional Connections �� A-3 Bluetooth Mouse Setup (optional) �� A-4

Operating System and Software�� A-6

System BIOS Settings �� A-7 Common Problems and Solutions �� A-9

Windows Vista Software Recovery �� A-15 Glossary �� A-17 Declarations and Safety Statements �� A-21 Notebook PC Information �� A-34

4

Contents

5

1. Introducing the Notebook PC

About This User’s Manual Notes For This Manual Safety Precautions Preparing your Notebook PC

Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

There may be differences between your Notebook PC and the drawings shown in this manual. Please accept your Notebook PC as being correct.

6

1 Introducing the Notebook PC

About This User’s Manual

You are reading the Notebook PC User’s Manual. This User’s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User’s Manuals:

1. Introducing the Notebook PC

Introduces you to the Notebook PC and this User’s Manual.

2. Knowing the Parts Gives you information on the Notebook PC’s components.

3. Getting Started

Gives you information on getting started with the Notebook PC.

4. Using the Notebook PC Gives you information on using the Notebook PC’s components.

5. Appendix Introduces you to optional accessories and gives additional information.

Notes For This Manual

A few notes and warnings in bold are used throughout this guide that you should be aware of in order to complete certain tasks safely and completely. These notes have different degrees of importance as described below:

NOTE: Tips and information for special situations.

TIP: Tips and useful information for completing tasks.

IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons.

WARNING! Important information that must be followed for safe operation.

Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the < > or [ ] and the enclosed letters.

< > [ ]

7

Introducing the Notebook PC 1

Safety Precautions

The following safety precautions will increase the life of the Notebook PC. Follow all precautions and

instructions. Except as described in this manual, refer all servicing to qualied personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners,

benzene, or other chemicals on or near the surface.

IMPORTANT! Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.

DO NOT

expose to or use near liquids, rain, or moisture. DO NOT use the modem during an electrical storm.

DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.

SAFE TEMP:

This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F)

Battery safety warning: DO NOT

throw the battery in re.

DO NOT short circuit the contacts. DO NOT disassemble the battery.

DO NOT expose to strong magnetic

or electrical elds.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT place or drop objects on top and do not shove any foreign objects into the Notebook PC.

DO NOT press or touch the display

panel. Do not place together with

small items that may scratch or enter the Notebook PC.

DO NOT leave the Notebook PC on your lap or any part of the body in order to prevent discomfort or injury from heat exposure.

INPUT RATING: Refer to the rating label on the bottom of the Notebook PC and be sure that your power adapter complies with the rating.

DO NOT throw the Notebook PC in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products and visit GreenASUS Takeback and Recycling page (http://green.asus.com/english/takeback.htm) for recycling information.

DO NOT

carry or cover a Notebook PC that is powered ON with any materials that will

reduce air circulation such as a carrying bag.

8

1 Introducing the Notebook PC

CAUTION! There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC or diskettes through airport magnetic detectors or expose them to magnetic wands.

Charge Your Batteries

If you intend to use battery power, be sure to fully charge your battery pack and any optional battery packs before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the Notebook PC is in use.

Airplane Precautions

Contact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restrictions for using electronic devices. Most airlines will allow electronic use only between and not during takeoffs and landings.

Transportation Precautions

To prepare the Notebook PC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The hard disk drive’s head retracts when the power

is turned OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the Notebook PC while the power is still ON. Close the display panel and check that it is latched securely in the closed position to protect the keyboard and display panel.

CAUTION! The Notebook PC’s surface is easily dulled if not properly cared for. Be careful not to rub or scrape the Notebook PC surfaces.

Cover Your Notebook PC

Purchase a carrying bag to protect the Notebook PC from dirt, water, shock, and scratches.

Some models may come with solid-state disk drives (SSD) based on your purchase. The design of the SSD endures shock. For the model with an SSD, you can keep the Notebook PC powered ON during transport, and need not worry about the disk drive failure or data damage.

9

Introducing the Notebook PC 1

Preparing your Notebook PC

These are only quick instructions for using your Notebook PC. Read the later pages for detailed information on using your Notebook PC.

1. Install the battery pack

2. Connect the AC Power Adapter

IMPORTANT! When opening, DO NOT force the display panel down to the table or else the hinges may break! Never lift the Notebook PC by the display panel!

1

3

2

3. Open the Display Panel 4. Turn ON the Notebook PC

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel > Power Options > System Set- tings.

1

2

3

10

1 Introducing the Notebook PC

11

2. Knowing the Parts

Basic sides of the Notebook PC

Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

There may be differences between your Notebook PC and the drawings shown in this manual. Please accept your Notebook PC as being correct.

12

2 Knowing the Parts

4

6

7

5

8

9

1 2 3

11

10

Top Side

Refer to the illustration below to identify the components on this side of the Notebook PC.

The keyboard differs for each territory.

13

Knowing the Parts 2

Display Panel

The display panel functions the same as a desktop monitor. The Notebook PC uses an

active matrix TFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop monitors, the LCD panel does not produce any radiation or ickering, so it

is easier on the eyes. Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel.

Status Indicators (top)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

Camera (on selected models)

The built-in camera allows picture taking or video recording. Can be used with video conferencing and other interactive applications.

2

3

4

5

6

7

Microphone (Built-in)

The built-in mono microphone can be used for video conferencing, voice narrations, or simple audio recordings.

1

8

Power Switch

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel “Power Options.”

Light Sensor (on selected models)

The light sensor measures the amount of ambient light and changes the illumination of the LCD

display accordingly.

Instant Keys

Instant keys allow you to launch frequently used applications with one touch of a button. Details are described in section 3.

Keyboard

The keyboard provides full-sized keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands. Two Windows function keys are provided to help ease navigation in the Windows operating system.

14

2 Knowing the Parts

Touchpad and Buttons

The touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse. A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy Windows or web navigation.

9

10

Fingerprint Scanner (on selected models)

The ngerprint scanner allows use of security software using your ngerprint as your identication key.

11

Status Indicators (front)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

15

Knowing the Parts 2

Bottom Side

Refer to the illustration below to identify the components on this side of the Notebook PC.

21 3

4

6 5

WARNING! The bottom of the Notebook PC can get very hot. Be careful when handling the Notebook PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. Do not use on soft surfaces such as beds or sofas which may block the vents. DO NOT PUT THE NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.

The bottom side may vary in appearance depending on model.

The battery pack size varies depending on model.

16

2 Knowing the Parts

1

2

3

4

Battery Lock - Spring

The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.

Battery Pack

The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use

when moving temporarily between locations. Battery time varies by usage and by the specications

for this Notebook PC. The battery pack cannot be disassembled and must be purchased as a single unit.

Central Processor Unit (CPU) Compartment

Some Notebook PC models feature a socketed-processor design to allow upgrading to faster processors in the future. Some models feature a ULV design for compactness and may not be upgraded. Visit an authorized service center or retailer for information on upgrades.

WARNING! End-user removal of the CPU or hard disk drive will void the warranty.

Memory (RAM) Compartment

The memory compartment provides expansion capabilities for additional memory. Additional memory will increase application performance by decreasing hard disk access. The BIOS au-

tomatically detects the amount of memory in the system and congures accordingly. There is

no hardware or software (including BIOS) setup required after the memory is installed. Visit an authorized service center or retailer for information on memory upgrades for your Notebook PC. Only purchase expansion modules from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

Hard Disk Drive Compartment

The hard disk drive is secured in a compartment. Visit an authorized service center or retailer for information on hard disk drive upgrades for your Notebook PC. Only purchase hard disk drives from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

Battery Lock - Manual

The manual battery lock is used to keep the battery pack secured. Move the manual lock to the unlocked position to insert or remove the battery pack. Move the manual lock to the locked position after inserting the battery pack.

Some models may come with solid-state disk drives based on your purchase.

17

Knowing the Parts 2

Shutdown Button (Emergency)

In case your operating system cannot properly turn OFF or restart, the shutdown button can be pressed with a straightened paper clip to shutdown the Notebook PC.

5

6

Flash Memory Slot

Normally an external memory card reader must be purchased separately in order to use

memory cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs.

This Notebook PC has a built-in high-speed memory card reader that can conveniently read

from and write to many ash memory cards as mentioned later in this manual.

18

2 Knowing the Parts

Left Side

Refer to the illustration below to identify the components on this side of the Notebook PC.

HDMI

1 2 3 4 5

1

2

3

4

2.0

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

Air Vents

The air vents allow cool air to enter and warm air to exit the Notebook PC.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

VGA Performance Switch (on selected models)

The VGA performance switch can be used to save battery power when not using an AC power adapter. Note: You must reboot the Notebook PC after changing this setting.

HDMI Port (on selected models)

HDMI (High-Denition Multimedia Interface) is an uncompressed all-digital audio/video interface between any audio/video source, such as a set-top box, DVD

player, and A/V receiver and an audio and/or video monitor, such as a digital tele-

vision (DTV). Supports standard, enhanced, or high-denition video, plus multichannel digital audio on a single cable. It transmits all ATSC HDTV standards and

supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements or requirements.

HDMI

19

Knowing the Parts 2

5

Wireless Switch

Enables or disables the built-in wireless LAN and Bluetooth (selected models). When enabled, the wireless status indicator will light. Windows software settings are necessary before use.

20

2 Knowing the Parts

Right Side

Refer to the illustration below to identify the components on this side of the Notebook PC.

EXPR ESS

1 2 3 4 5 6 7 8

1

2

3

4

ExpressCard Slot

One 26pin Express card slot is available to support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

The dummy expansion card that comes with the Notebook PC can function as a memory card holder,

which protects the conductors of your ash memory card.

2.0

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

SPDIF Output Jack

This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant devices for digital audio output. Use this feature to turn the Notebook PC into a hi- home

entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to

amplied speakers or headphones. Using this jack automatically disables the built-in speakers.

Combo

Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

21

Knowing the Parts 2

6

5

7

8

Display (Monitor) Output

The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.

LAN Port

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.

Power (DC) Input

The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent damage to the Notebook PC and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE. BE SURE

NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

Kensington® Lock Port

The Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Notebook PC security products. These security products usually include a metal

cable and lock that prevent the Notebook PC to be removed from a xed object.

Some may also include a motion detector to sound an alarm when moved.

22

2 Knowing the Parts

Rear Side

Refer to the illustration below to identify the components on this side of the Notebook PC.

1

Air Vents

The air vents allow cool air to enter and warm air to exit the Notebook PC.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

1

Battery Pack

The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use

when moving temporarily between locations. Battery time varies by usage and by the specications

for this Notebook PC. The battery pack cannot be disassembled and must be purchased as a single unit.

Front Side

Refer to the illustration below to identify the components on this side of the Notebook PC.

21 1

1

2

Flash Memory Slot

Normally an external memory card reader must be purchased separately in order to use

memory cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs.

This Notebook PC has a built-in high-speed memory card reader that can conveniently read

from and write to many ash memory cards as mentioned later in this manual.

23

3. Getting Started

Using AC Power Using Battery Power Powering ON the Notebook PC Checking Battery Power Powering Options Power Management Modes Special Keyboard Functions Switches and Status Indicators

Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

There may be differences between your Notebook PC and the drawings shown in this manual. Please accept your Notebook PC as being correct.

24

3 Getting Started

IMPORTANT! Damage may occur if you use a different adapter to power the Notebook PC or use the Notebook PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Notebook PC with a faulty AC-DC adapter.

This Notebook PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.

WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

You can buy travel kits for the Notebook PC that includes power and modem adapters for almost every country.

1

2

3

Power System

Using AC Power

The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power

from a wall outlet to the DC power required by

the Notebook PC. Your Notebook PC comes with

a universal AC-DC adapter. That means that you

may connect the power cord to any 100V-120V as well as 220V-240V outlets without setting

switches or using power converters. Different

countries may require that an adapter be used to connect the provided US-standard AC power cord to a different standard. Most hotels will provide universal outlets to support different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.

Unplug the power adapter or switch off the AC outlet to minimize the power consumption when the Notebook PC is not in use.

WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug to the Notebook PC. Doing so may damage the AC-DC adapter.

25

Getting Started 3

IMPORTANT! Never attempt to remove the battery pack while the Notebook PC is turned ON, as this may result in the loss of working data.

IMPORTANT! Only use battery packs and power adapters supplied with this Note-

book PC or specically approved by the manufacturer or retailer for use with this

model or else damage may occur to the Notebook PC.

1

3

2

1

3

2

To install the battery pack:

To remove the battery pack:

WARNING! For safety reasons, DO NOT throw the battery in re, DO NOT

short circuit the contacts, and DO NOT disassemble the battery. If there is any abnormal operation or damage to the battery pack caused by impact, turn OFF the Notebook PC and contact an authorized service center.

Battery Care

The Notebook PC’s battery pack, like all rechargeable batteries, has a limit on the number times it can be recharged. The battery pack’s useful life will depend on your environment temperature, humidity, and how your Notebook PC is used. It is ideal that the battery be used in a temperature range be-

tween 5˚C and 35˚C (41˚F and 95˚F). You must also take into account that the Notebook PC’s internal

temperature is higher than the outside temperature. Any temperatures above or below this range will shorten the life of the battery. But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must be purchased from an authorized dealer for this Notebook PC. Because batteries also have a shelf life, it is not recommended to buy extras for storing.

Using Battery Power

The Notebook PC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a Notebook PC retailer.

Installing and Removing the Battery Pack

Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.

26

3 Getting Started

IMPORTANT! If warnings are still given during bootup after running a software disk checking utility, you should take your Notebook PC in for servicing. Continued use may result in data loss.

IMPORTANT! To protect the hard disk drive, always wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

WARNING! DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

Before bootup, the display panel ashes when the power is turned ON. This is part

of the Notebook PC’s test routine and is not a problem with the display.

Powering ON the Notebook PC

The Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify

the system conguration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splash screen, standard boot information such as the BIOS version can be seen. Press [ESC] and

you will be presented with a boot menu with selections to boot from your available drives.

The Power-On Self Test (POST)

When you turn ON the Notebook PC, it will rst run through a series of software-controlled diagnostic tests called the Power-On Self Test (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture. The POST includes a record of the Notebook

PC’s hardware conguration, which is used to make a diagnostic check of the system. This record is

created by using the BIOS Setup program. If the POST discovers a difference between the record and

the existing hardware, it will display a message on the screen prompting you to correct the conict by

running BIOS Setup. In most cases the record should be correct when you receive the Notebook PC.

When the test is nished, you may get a message reporting “No operating system found” if the hard

disk was not preloaded with an operating system. This indicates that the hard disk is correctly detected and ready for the installation of a new operating system.

Self Monitoring and Reporting Technology

The S.M.A.R.T. (Self Monitoring and Reporting Technology) checks the hard disk drive during POST and gives a warning message if the hard disk drive requires servicing. If any critical hard disk drive warning is given during bootup, backup your data immediately and run Windows disk checking program. To run Window’s disk checking program: click Start > select Computer > right-click a hard disk drive icon > choose Properties > click the Tools tab > click Check Now > click Start. You can also select “Scan ... sectors” for more effective scan and repair but the process will run slower.

27

Getting Started 3

You will be warned when battery power is low. If you continue to ignore the low battery warnings, the Notebook PC eventually enters suspend mode (Windows default uses STR).

WARNING! Suspend-to-RAM (STR) does not last long when the battery power is depleted. Suspend-to-Disk (STD) is not the same as power OFF. STD requires a small amount of power and will fail if no power is available due to complete battery depletion or no power supply (e.g. removing both the power adapter and battery pack).

Screen captures shown here are examples only and

may not reect what you

see in your system.

Checking Battery Power

The battery system implements the Smart Battery standard under the Windows environment, which allows the battery to accurately report the amount of charge left in the battery. A fully-charged battery

pack provides the Notebook PC a few hours of working power. But the actual gure varies depending

on how you use the power saving features, your general work habits, the CPU, system memory size, and the size of the display panel.

Left-click the battery icon

Pointer over the battery icon without power adapter�

Pointer over the battery icon with power adapter�

Right-click the battery icon

WARNING! DO NOT leave the battery pack discharged. The battery pack will discharge over time. If not using a battery pack, it must continued to be charged every three months to extend recovery capacity or else it may fail to charge in the future.

The battery stops charging if the temperature is too high or the battery voltage is too high.

Charging the Battery Pack

Before you use your Notebook PC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Notebook PC is connected to external power using the power

adapter. Fully charge the battery pack before using it for the rst time. A new battery pack must

completely charge before the Notebook PC is disconnected from external power. It takes a few hours to fully charge the battery when the Notebook PC is turned OFF and may take twice the time when the Notebook PC is turned ON. The battery status indicator on the Notebook PC turns OFF when the battery pack is charged.

The battery starts charging when the charge remaining in the battery drops below 95%. This prevents the battery from charging frequently. Minimizing the recharge cycles helps prolong battery life.

28

3 Getting Started

IMPORTANT! To protect the hard drive, wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

IMPORTANT! Do not use emergency shutdown while data is being written; doing so can result in loss or destruction of your data.

Emergency Shutdown

In case your operating system cannot properly turn OFF or restart, there are two additional ways to shutdown your Notebook PC:

Power Options

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel “Power Options.”

For other options, such as “Switch User, Restart, Sleep, or Shut Down,”

click the arrowhead next to the lock icon.

Restarting or Rebooting

After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. To restart the system manually, choose Restart.

Use a straightened paper clip to press the shutdown button.

(1) Hold the power button over 4 seconds, or

(2) Press the shutdown button on the bottom�