ARRIS VAP2400 User Manual
VAP2400
Wireless Video Bridge
MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. All other product or service
names are the property of their respective owners. ©2011 Motorola Mobility, Inc. All rights reserved.
No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation,
transformation, or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make
changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola
provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time.
Contents
INSTALLATION AND OVERVIEW ....................................................... 5
About this Manual ................................................................................ 6
Box Contents ........................................................................................6
Front Panel ............................................................................................7
Rear Panels ...........................................................................................8
Installing Your VAP2400 (Dual Units) ..................................................... 9
Step 1: Install the Access Point .......................................................9
Step 2: Install the Client .................................................................. 10
Installing Additional VAP2400 Clients ................................................... 12
TROUBLESHOOTING ..........................................................................15
Solutions ............................................................................................... 15
SAFETY AND COMPLIANCE .............................................................. 17
VAP2400 Wireless Video Bridge • Installation Manual iii
1
The VAP2400 enables you to transmit multiple standard- and high-definition video streams throughout your home
wirelessly. You can enjoy a full range of video services and applications without having to run wires, lay cables,
or drill holes. The VAP2400 uses one-button, Wi-Fi Protected Setup (WPS) technology to ensure easy, reliable
installation.
The VAP2400 operates via two (or more) integrated units. You’ll dedicate one unit as the Access Point and
the other unit (or units) as its Client. When you connect a VAP to your home gateway, it auto-configures as an
Access Point. The Access Point streams content to the Client, which you’ll connect to a secondary set-top in
a different location in your home. (The Client auto-configures as well when you connect it to the set-top.) The
following graphic illustrates this setup:
Installation and Overview
OR
Room 2
VAP2400 Wireless Video Bridge • Installation Manual 5
Room 1
Secondary Set-top
OR
Installation and Overview
About this Manual
This manual provides you with instructions on how to install your VAP2400 series video bridge. Motorola
designed the VAP2400 series to install and integrate easily with your set-top box and home network. If you
encounter any difficulties during the installation process, refer to the Troubleshooting section at the end of this
manual.
Box Contents
Your box should contain the following:
Single Unit Bundle (for additional Clients)
Dual Unit Bundle (for initial installation)
One VAP2400 Series
connection kit
One Ethernet Cable
One Power Adapter Two Power Adapters
VAP2400 Wireless Video Bridge • Installation Manual 6
Two VAP2400 Series
connection kits
Two Ethernet Cables
Installation and Overview
Front Panel
1
2
3
1 Power Green = The VAP is on
Amber = The VAP is on standby
Off = The VAP is off or disconnected from its power source
2 Wireless Link Quality Solid Green = Wireless quality is good
Flashing Green = Wireless quality is average
Off = No wireless connection
3 Operational Mode Solid Green = The VAP is functioning as an Access Point
Solid Amber = The VAP is functioning as a Client
Blinking Amber = There is an error. Refer to “Troubleshooting” for more
details.
Off = The automatic configuration process has failed
VAP2400 Wireless Video Bridge • Installation Manual 7
Installation and Overview
Rear Panels
1
2
1
2
3
3
4
Single Port
1 Reset Button Resets the VAP to its default settings
2 WPS Button Establishes wireless connection to your home network
3 Ethernet Port Connects to an Ethernet-equipped computer, hub, or switch using an
RJ-45 cable connection.
4 Power Jack Provides power to the VAP2400
VAP2400 Wireless Video Bridge • Installation Manual 8
Four Port
4
Loading...