http://www.anritsu.com 451
RF MICRO WAVE MEASURING INSTR UMENTS
9
GPIB
For Configuring Automated Measurement Systems
The MN63A/65A/72A/64B provide GPIB as a standard feature and
are suitable for automatic measuring system components used in
R&D, inspection, or production. The 50 Ωmodels are available in three
different frequency ranges, which can be selected to match the application for maximum economy. The attenuation calibration value is
stored in the internal memory and can be uploaded to the system controller for checking against measured values, per mitting a significant
increase in system accuracy. A relative setting function is also provided, which allows measurement to be referenced to any arbitrary
level. Rotary encoders are standard, allowing simple, smooth setting
under manual control.
Features
•
Wide frequency range
•
High accuracy
•
Long operating life
•
High-speed switching
•
Readout of attenuation calibration via GPIB
•
Relative attenuation display function
•
Rotary encoders for smooth manual setting
PROGRAMMABLE ATTENUATOR
MN63A, MN65A, MN72A, MN64B
DC to 2 GHz DC to 6 GHz DC to 18 GHz DC to 1 GHz
MN63A
PRE-AMPLIFIER
MH648A
100 kHz to 1200 MHz
For Amplifying Low-Level Signals
The MH648A is a pre-amplifier for improving sensitivity in spectrum
analyzers, field strength meters, frequency counters, etc.
EMI PROBE
MA2601B/C
Custom-made product
The MA2601B/C is a compact loop antenna to use with a spectrum
analyzer or a field strength meter for EMI measurement. The combination is used to locate noise sources and to compare relative noise
source levels.
Features
•
Exact detection of magnetic field components (because MA2601B/C
is electrostatically shielded)
•
Approximately flat magnetic-field detection characteristics in the
range from 100 to 1000 MHz (MA2601B)
Applications
•
Sensing magnetic fields when it is connected to a spectrum analyzer, etc.
•
Noise immunity testing of electronic components or electrostatic
shield-effect testing with using a signal generator
Loading...