1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place the Multimix in an appropriate position for operation.
5. Make sure all devices are turned off and all volumes are at “zero”
6. Connect all input sources as indicated in the diagram.
7. Connect the outputs to the power amplifier(s), tape decks, and/or audio sources.
8. Plug your Multimix and other devices into AC power.
9. Switch everything on in the following order:
• Audio input sources
• External effects, recording devises or equalizers
• The Multimix
• Last, any amplifiers
10. When turning off, always reverse this operation by:
• Turning off amplifiers
• The Multimix
• External effects, recording devises or equalizers
• Last, any input devices
11. Go to
http://www.alesis.com/ for product registration.
CHANNEL FEATURES
1. EQ: Boosts or cuts the respective frequencies
for each channel.
2. AUX (6FX only): Controls level routed to
internal effects processor or routes channel
signal to an external device like an effects
processor.
3. EFF/AUX (6FX only): Selects whether the
Aux send signal is routed to the internal effects
or the external Aux send.
4. AUX A (8FX only): Routes channel signal to
an external device like an effects processor.
5. AUX B (8FX only): Controls level routed to
internal effects processor or – if a device is
patched into the Aux B returns – routes
channel signal to an external device like an
effects processor.
6. PAN/BALANCE: Assigns the channel signal to
any spot in the mono or stereo spectrum.
7. CHANNEL FADER: Controls the signal level
of the MIC or LINE inputs.
MASTER FEATURES
Note: It is recommended that the MULTIMIX
be turned off before connecting and
disconnecting any sources to the inputs of
the unit.
1. EFFECTS LEVEL (6FX only): Controls the
signal level of the internal effects.
2. AUX RETURN (6FX only): Controls the
signal level that returns from AUX.
3. AUX RETURN A (8FX only): Controls the
signal level that returns from AUX A.
4. EFFECTS/AUX RET B (8FX only): Controls
the signal level of the internal effects or the
level returning from AUX B if in use.
5. +48V LED: Indicates that the PHANTOM
POWER is enabled for the MIC inputs.
6. LED METERS: Monitors the audio signal level.
7. 2TK TO MIX: Routes the 2TK input to the
MAIN faders.
8. 2TK TO CTRL: Routes the 2TK input signal to
the HDPH /CTRL RM output.
9. MAIN MIX: Controls the level of the MAIN
OUTPUTS.
10. HDPH/CTRL RM: Controls the level that is
sent to the PHONES or CTRL RM outputs.
8FX only
MANUAL DE INICIO RÁPIDO PARA EL MULTIMIX
(ESPAÑOL)
1. Asegúrese de que todos los artículos incluidos al inicio de este manual están incluidos
en la caja.
2. LEA EL FOLLETO DE INSTRUCCIONES DE SEGURIDAD ANTES DE UTILIZAR EL
PRODUCTO.
3. Estudie este diagrama de instalación.
4. Coloque el Multimix en una posición adecuada para su funcionamiento.
5. Asegúrese de que todos los dispositivos estén apagados y de que todos los volúmenes
estén a «cero».
6. Conecte todas las fuentes de entrada como se indica en el diagrama.
7. Conecte las salidas a los amplificadores de alimentación, unidades de cinta magnética,
y/o fuentes de audio.
8. Enchufe su Multimix y otros dispositivos a la potencia de corriente alterna.
9. Prenda todo en el siguiente orden:
• Fuentes de entrada de audio
• Efectos externos, dispositivos de grabación o ecualizadores
• El Multimix
• Por último, cualquier amplificador
10. Al apagar, realice siempre esta operación al contrario:
• Apague los amplificadores
• El Multimix
• Efectos externos, dispositivos de grabación o ecualizadores
• Finalmente, cualquier dispositivo de entrada
11. Visite
http://www.alesis.com/ para registrar el producto.
Loading...
+ 7 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.