User Guide (English)
Introduction
Box Contents
Harmony 32
USB Cable
Software Download Card
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit alesis.com.
For additional product support, visit alesis.com/support.
Setup
Connection Diagram
Items not listed in Introduction > Box Contents are sold separately.
Computer
USB Charger
(not included)
Headphones
(not included)
3
Features
Top Panel
1. Power On/Off: Press this button to turn the keyboard on or off.
Note: After 5 minutes of inactivity, Harmony 32 will power off. If you press any key, it will turn back on.
2. Display: This LED Display will update when you make changes to settings such as the tone, rhythm,
tempo, etc.
3. Volume: Press the Volume or Volume buttons to increase or decrease the overall volume of the
keyboard. Press both buttons at the same time to reset to the default volume (7).
4. Number buttons and + / - buttons: Use these buttons to change the tone, rhythm, or demo song
settings. Before using the Number or + / - buttons, press the button corresponding to the setting that
you would like to change.
5. Demo Song: Press this button and then use the Number buttons or + / - buttons to select and begin
playback of one of the 40 included demo songs. Press this button again to stop the demo song.
6. Tone: Press this button and then use the Number buttons or + / - buttons to select one of the 300
available tones that will play when you press the keys.
7. Sustain: Press this button to turn the sustain effect on/off for your selected tone.
8. Percussion: Press these buttons to play percussion sounds. The images above each button indicate
which percussion sound will be played.
9. Rhythm: Press this button and then use the Number buttons or + / - buttons to select one of the 300
built-in rhythms.
10. Start/Stop: Press this button to start your selected rhythm. You can also press this button to stop a
rhythm, demo song, or the metronome.
11. Tempo: Press the Tempo or Tempo buttons to increase or decrease the tempo of the rhythm,
demo song, or metronome. Press both buttons at the same time to reset to the default tempo (120
BPM).
12. Record: Press this button to record your own song. The LED screen will display REC and will begin
recording when you play a key. When you are finished, press the Play button to listen to your song.
Note: If a song has already been recorded, pressing this button will clear the memory to prepare to
record a new song. Playing a rhythm or demo song will also clear your recorded song.
13. Play: Press this button to begin playback of your recorded song. Press this button again to stop your
recorded song.
14. Metronome: Press this button to start the built-in metronome feature. Keep pressing this button to
select between the available time signatures (1/4, 2/4, 3/4, and 4/4).
4
Rear Panel
1. Headphone Output (1/8” / 3.5 mm TRS): Connect headphones
(not included) to listen to your keyboard. When headphones are
connected, the internal speakers will be muted for private practice.
2. USB-MIDI Port: Use the included USB cable to connect this port
to a Mac/PC to interact with music educational or recording
software. Batteries are not required to power Harmony 32 when it
is connected to a Mac/PC.
Note: You can also use the included USB cable for connecting to a
standard USB wall power adapter (not included) to use this
keyboard on its own without needing batteries.
Bottom Panel
1. Battery Compartment: Install 4 AA batteries (not included) here
to power the keyboard without using the USB-MIDI port.
Avoid touching the USB port, the headphone output, or the area around these connections while
using this keyboard with a computer. This may cause the keyboard to temporarily stop working or
act abnormally.
5
Guía del usuario (Español)
Introducción
Contenido de la caja
Harmony 32
Cable USB
Tarjeta de descarga de software
Guía del usuario
Manual sobre la seguridad y garantía
Soporte
Para obtener la información más reciente acerca de este producto (requisitos de sistema,
información de compatibilidad, etc.) y registrarlo, visite alesis.com.
Para obtener soporte adicional del producto, visite alesis.com/support.
Instalación
Diagrama de conexión
Los elementos que no se enumeran en Introducción > Contenido de la caja se venden por
separado.
Cargador USB
(no incluido)
Computadora
Auriculares
(no incluidos)
6