AEG-Electrolux ENA38733W, ENA34733X, ENA38733X User Manual

0 (0)

user manual istruzioni per l’uso bruksanvisning

Fridge Freezer

Frigo-Congelatore

Kyl-frys

ENA34733X

ENA38733X

ENA38733W

2 electrolux

This Quick user manual contains all the basic facts of your new product and is easy to use. Electrolux wants to lower our paper consumption related to user manuals by some 30%, which will help spare 12,000 trees every year. The Quick user manual is one of many steps taken by Electrolux for the environment. It may be a small step, but just by doing a little you do a lot.

A complete user manual can be found at www.electrolux.com

SAFETY INFORMATION

In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Keep all packaging well away from children. There is risk of suffocation.

If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it.

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

Caution! Keep ventilation openings clear of obstruction.

The appliance is designed exclusively for domestic use.

The appliance is intended for keeping foodstuff and/or beverages in a normal household as explained in this instruction booklet.

Do not use a mechanical device or any artificial means to speed up the thawing process.

Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer.

Do not damage the refrigerant circuit.

The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.

If the refrigerant circuit should become damaged:

avoid open flames and sources of ignition

thoroughly ventilate the room in which the appliance is situated

It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock.

Warning! Any electrical component (power cord, plug, compressor) must be replaced

by a certified service agent or qualified service personnel.

1.Power cord must not be lengthened.

2.Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire.

3.Make sure that you can come to the mains plug of the appliance.

4.Do not pull the mains cable.

5.If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.

6.You must not operate the appliance without the lamp cover1) of interior lighting.

This appliance is heavy. Care should be taken when moving it.

Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.

Avoid prolonged exposure of the appliance to direct sunlight.

Bulb lamps2) used in this appliance are special purpose lamps selected for household applian-

1) If the lamp cover is foreseen

ces use only. They are not suitable for household room illumination.

Daily Use

Do not put hot pot on the plastic parts in the appliance.

Do not store flammable gas and liquid in the appliance, because they may explode.

Do not place food products directly against the air outlet on the rear wall.3)

Frozen food must not be re-frozen once it has been thawed out.

Store pre-packed frozen food in accordance with the frozen food manufacturer's instructions.

Appliance's manufacturers storage recommendations should be strictly adhered to.

Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.

Ice lollies can cause frost burns if consumed straight from the appliance.

Care and cleaning

Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.

Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brandnew product, then dry thoroughly.

Do not clean the appliance with metal objects.

Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.

Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live.

Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance.

Installation

Important! For electrical connection carefully follow the instructions given in specific paragraphs.

electrolux 3

Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.

It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.

Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.

Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn.

The appliance must not be located close to radiators or cookers.

Make sure that the mains plug is accessible after the installation of the appliance.

Connect to potable water supply only.4)

Service

Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.

This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in ei-

ther its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The materials used

on this appliance marked by the symbol are recyclable.

2)If the lamp is foreseen

3)If the appliance is Frost Free

4)If a water connection is foreseen

4 electrolux

CONTROL PANEL

 

 

 

 

 

 

 

 

 

 

 

A B

 

 

C

D E

A - Appliance button ON/OFF

 

 

 

 

 

 

 

 

D - Function button

B - Temperature regulation button

 

 

 

 

 

 

E - Confirmation button

C - Temperature and function indicator

 

 

 

 

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

8

7

6

5

1Temperature indicator.

2Excessive temperature alarm.

3FreeStore funcion indicator.

Shopping function indicator.

5 Child Lock function indicator.

First switch on

After plugging the plug into the power outlet, if the display is not illuminated, press key (A), appliance on.

As soon as the appliance is turned on, it is in alarm condition, the temperature flashes and you will hear a buzzer.

Press key (E) and the buzzer will go off (also see the section on "excessive temperature alarm" )

the icon still flashes and on the indicator will appear the warmest temperature reached. For a correct storage of the food select the Eco mode function that guarantee the following temperatures are set:

+5°C in the fridge -18°C in the freezer

Wait until the inside compartment temperature reach -18°C, before introducing the goods in the freezer compartment.

To select a different temperature see "Temperature regulation".

6Timer function indicator.

7Positive or negative temperature indicator.

8Action Freeze function indicator.

9Compartment indicator.

10 Eco Mode function indicator.

Switching off

The appliance is shut off by pressing key (A) for more than 1 second.

During this, a countdown of the temperature from -3 -2 -1 will be shown.

Switch off the fridge compartment

To switch off the fridge compartment press the button (D) until this compartment is selected and then press the button (A), until a countdown from -3 -2 -1 is completed.

Important! It is not possible to run only the fridge. If the freezer is turned off, the fridge will also turn off.

Functions Menu

By activating the key (D) the functions menu is operating. Each function could be confirmed by pressing button (E). If there is no confirmation after some seconds the display will go out from the menu and return in normal condition.

The following functions are indicated:

Select the fridge compartment

Select the freezer compartment

Eco Mode function

FreeStore function

Shopping function

Child Lock function

Drinks Chill function

Action Freeze function

Temperature regulation

Press the key (D) to select the compartment and than the key (B) to set the necessary temperature. Press the key (E) to confirm the selection.

The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours.

Fluctuations of some degrees around set temperature are normal and does not mean any fault in the appliance.

Holiday Function "H"

The holiday function sets the temperature at + 15°C.

This function allows you to keep the refrigerator shut and empty during a long holiday period ( e. g. the summer holidays) without the formation of a bad smell.

To turn on the holiday function operate as per modift the selected temperature. The temperature indicator can modify the displayed temperature up to + 8 °C, 1 °at a tim. + 2 °C will be followed by the letter "H ". Press key E to confirm. Now the refrigerator is in the "holiday "function in the energysaving mode.

Important! The fridge compartment must be empty with holiday function on.

Child Lock Function

The Child Lock function is activated by pressing key (D) (several times if necessary) until the corre-

sponding icon appears .

You must confirm the choice by pressing key (E) within few seconds. You will hear the buzzer and the icon remains lighted. In this condition any possible operation through the keys does not cause any change as long as this function is activated. It is possible to de-activate the function at any time by pressing key (D) until the corresponding icon will flash and then key (E).

Shopping Function

If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the Shopping function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.

The Shopping function is activated by pressing key (D) (several times if necessary) until the corre-

electrolux 5

sponding icon appears . You must confirm the choise by pressing key (E) within few seconds. You will hear the buzzer and the icon remains lighted.

The Shopping function shuts off automatically after approximately 6 hours. It is possible to de-ac- tivate the function at any time by pressing key (D) until the corresponding icon will flash and then key (E).

Eco Mode Function

Press the key (D) (several times if necessary) until

the corresponding icon appears .

Press the key (E) to confirm the selection. You will hear the buzzer and the icon remains lighted. In this condition the temperatures are automatically set (+ 5°C and - 18°C), in the best conditions for storing food.

Set a different temperature in one of the compartment to switch off the function.

FreeStore Function

Press the key (D) (several times if necessary) until

the corresponding icon appears

Press the key (E) to confirm the selection. You will hear the buzzer and the icon remains lighted.

Important! If the function is activated automatically the FreeStore icon is not shown (refer to "Daily use").

The activation of the FreeStore function increase the energy consumption.

Action Freeze Function

The freezer compartment is suitable for long term storage of commercially frozen and deep-frozen food, and for freezing fresh food.

The maximum quantity of foods to freeze in 24 hours is shown on the rating plate.

To freeze the amount of food indicated on the rating plate, place the food directly in touch with the cooling surface (remove the drawer or basket). In case the food is frozen inside the drawers or baskets, the maximum quantity is slightly reduced.

To freeze fresh foods, you will need to activate the Action Freeze function. Press key (D) (several

times if necessary) until indicator appears. You must confirm the choice by pressing key (E) within few seconds. You will hear the buzzer and on the display will appear some animation with lines.

After a pre-cooling period of 24 hours, place the foods in the freezer.

Place the food to be frozen in the compartment, as this is the coldest point.

The freezing process takes 24 hours. During this period do not put other foods in the freezer. This function stops automatically after 52 hours.

6 electrolux

It is possible to deactivate the function at any

time by pressing key (D) until indicator will flash and then press key (E).

Drinks Chill Function

The Drinks Chill function is to be used as a safety warning when placing bottles in the freezer compartment. It is activated by pressing key (D) (several times if necessary) until the corresponding

icon appears .

You must confirm the choice by pressing key (E) within few seconds. You will hear the buzzer and the icon remains lighted.

In this condition it operates a timer with a default value of 30 min. and it could change from 1 to 90 min., by pressing key (B) you select the minutes needed.

At the end of the selected time there are the following indications:

on the indicator the symbol flashing

the icon flashing

the icon flashing

sounding of an acoustic alarm until key (E) is pressed

At this point bear in mind to remove the drinks contained in the freezer compartment.

It is possible to deactivate the function at any time by pressing key (D) until the corresponding icon will flash and then key (E).

Excessive temperature alarm

An increase in the temperature in a compartment (for example due to an power failure) is indicated by:

flashing temperature

freezer compartment flashing

flashing of the icon

sounding of buzzer

When normal conditions are restored:

the acoustic signal shuts off

the temperature value continues to flash When you press key (E) to de-activate the alarm, the highest temperature reached in the compart-

ment appears on indicatorfor some seconds. Then it returns on the normal operation showing the temperature of the selected compartment. During the alarm phase, the buzzer can be switched off by pressing key (E).

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Important! Do not use detergents or abrasive powders, as these will damage the finish.

DAILY USE

Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run at least 2 hours on the higher settings.

Important! In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooling).

Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.

Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.

FreeStore

The refrigerator compartment is equipped with a device that allows for rapid cooling of foods and more uniform temperature in the compartment.

This device activates by itself when needed, for example for a quick temperature recovering after door opening or when the ambient temperature is high.

Allows you to switch on the device manually when needed (refer to "FreeStore Function").

Important! The FreeStore device stops when the door is open and restarts immediately after the door closing.

Vegetable drawer with humidity control

The drawer is suitable for storing fruit and vegetables.

There is a grille (if foreseen) on the bottom of the drawer to separate the fruit and vegetables from any humidity that may form on the bottom surface. All parts inside the drawer can be removed for cleaning purposes

To regulate the humidity in the vegetable drawer there is a device with slits (adjustable by means of a sliding lever).

electrolux 7

When the ventilation slots are closed:

the natural moisture content of the food in the fruit and vegetable compartments is preserved for longer.

When the ventilation slots are opened:

more air circulation results in a lower air moisture content in the fruit and vegetable compartments.

FreshZone drawer

TheFreshZonedrawer is suitable for storing fresh food like fish, meat, seafood, because the temperature is lower here than in the rest of the fridge.

HELPFUL HINTS AND TIPS

Normal Operating Sounds

You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct.

When the compressor is on, the refrigerant is being pumped around and you will hear a whir-

ring sound and a pulsating noise from the compressor. This is correct.

The thermic dilatation might cause a sudden cracking noise. It is natural, not dangerous physical phenomenon. This is correct.

8 electrolux

CARE AND CLEANING

Caution! Unplug the appliance before carrying out any maintenance operation.

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging

must therefore only be carried out by authorized technicians.

Defrosting of the refrigerator

Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.

It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole.

Defrosting of the freezer

The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan.

TECHNICAL DATA

 

 

 

ENA34733X

 

ENA38733W

 

 

 

ENA34733W

 

ENA38733X

Dimension

 

 

 

 

 

 

Height

 

1850 mm

 

2010 mm

 

Width

 

595 mm

 

595 mm

 

Depth

 

648 mm

 

648 mm

Rising Time

 

 

18 h

 

18 h

The technical information are situated in the rat-

 

 

 

 

ing plate on the internal left side of the appliance and in the energy label.

INSTALLATION

Caution! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the

appliance.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance:

Climate

 

Ambient temperature

class

 

 

SN

 

+10°C to + 32°C

N

 

+16°C to + 32°C

ST

 

+16°C to + 38°C

T

 

+16°C to + 43°C

 

 

 

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet.

Warning! It must be possible to disconnect the appliance from the mains

power supply; the plug must therefore be easily accessible after installation.

100 mmmin

A B

20 mm

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.

The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under the screw head, then tighten again the screws.

electrolux 9

2

1

3

Levelling

When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front.

Removing the shelf holders

Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation.

To remove them proceed as follows:

1.Move the shelf holders in the direction of the arrow (A).

2.Raise the shelf from the rear and push it forward until it is freed (B).

3.Remove the retainers (C).

AEG-Electrolux ENA38733W, ENA34733X, ENA38733X User Manual

10 electrolux

Door reversibility

Warning! Before carrying out any operations, remove the plug from the power

socket.

Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.

To change the opening direction of the door, do these steps:

1.Open the door with the appliance in the upright position. Unscrew the screws (t1) and remove the upper door plastic trim (t2). Close the door.

t1

t1

t1

t2

t3

d7

2.Remove the little plastic cover from the door plastic trim and refit on the opposite side (t3).

3.Remove the panel (t4). If it is necessary use a screwdriver very carefully. Unscrew the screw on the other side. Remove the upper

door mount (t5). Place them in an empty plastic bag.

t4

t5

4.Remove the upper door.

5.Unscrew the screw and remove the door stopper (d1). Attach it reversed on the other side.

d1

6.Unscrew the middle hinge (m2). Remove the plastic spacer (m1).

7.Remove the lower door.

m1 m2

m6

m5

m3 m4

electrolux 11

14.Re-insert the lower door on the pivot pin (b2).

15.Re-screw the middle hinge (m1) on the opposite side . Do not forget the plastic spacer (m2) inserted under the middle hinge.

16.Re-insert the upper door on the middle hinge (m5).

Make sure that the edges of the doors run parallel to the side edge of the appliance.

17.Position and fix the upper hinge (you can find them in the instruction for use bag) on the opposite side (t6).

t6

t7

8.Remove the spacer (m6) and move to the other side of the hinge pivot (m5).

9.Remove using a tool the cover (b1). Unscrew the lower hinge pivot (b2) and the spacer (b3) and place them on the opposite side.

10.Re-insert the cover (b1) on the opposite side.

b1

b2 b3

11.Remove the stoppers (d1) and move to the other side of the doors.

12.Remove the left-hand cover pin of the middle hinge (m3,m4) and move to the other side.

13.Fit the pin of the middle hinge (m5) into the lefthand hole of the lower door.

18.Insert the panel (t7) (that can be found in the instruction for use bag).

19.Open the upper door, attach the top cover (t2) using screws (t1). Insert the magnet (d7). Close the door.

20.Reposition, level the appliance, wait for at least four hours and then connect it to the power socket.

Do a final check to make sure that:

All screws are tightened.

The magnetic seal adheres to the cabinet.

The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket. In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost.

Loading...
+ 25 hidden pages