F99001VIP
FAVORIT 99001 VI
User manual Dishwasher
Benutzerinformation Geschirrspüler
Contents
2
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we
recommend you to keep it in a safe place. And please pass it to any future owner
of the appliance.
We wish you much joy with your new appliance.
CONTENTS
SAFETY INFORMATION 3
Children and vulnerable persons safety
3
General safety 3
Use 3
Care and cleaning 4
Installation 4
Frost precautions 4
Water connection 4
Electrical connection 5
Internal lamp 5
Service centre 5
To discard the appliance 6
PRODUCT DESCRIPTION 6
CONTROL PANEL 7
On/off button 7
Menu buttons 7
OK START button 7
OPTION button 7
Menu option 8
Display 9
USE OF THE APPLIANCE 9
Activating the appliance for the first time
9
Using the appliance 9
SETTING THE WATER SOFTENER 10
Manual adjustment 11
Electronic adjustment 11
USE OF DISHWASHER SALT 11
USE OF DETERGENT AND RINSE AID 12
Use of detergent 12
Use of rinse aid 12
Adjust the rinse aid dosage 12
MULTITAB FUNCTION 13
LOADING CUTLERY AND DISHES 13
Hints and tips 13
Beer glass holders 14
WASHING PROGRAMMES 15
SELECT AND START A WASHING PROGRAMME
Starting the washing programme without
delay start 16
Starting the washing programme with
delay start 16
Cancelling the delay start 17
Interruption of a washing programme
Cancelling the washing programme 17
End of the washing programme 17
Remove the items from the baskets 17
CARE AND CLEANING 18
To remove and clean the filters 18
To clean the spray arms 18
To clean the external surfaces 19
WHAT TO DO IF… 19
The washing results and drying results are
not satisfactory 20
Activating the rinse aid dispenser 21
TECHNICAL DATA 21
ENVIRONMENT CONCERNS 22
Subject to change without notice
16
17
Safety information
SAFETY INFORMATION
Before the installation and use, read this manual carefully:
• For your safety and the safety of your property.
• To help the environment.
• For the correct operation of the appliance.
Always keep these instructions with the appliance also if you move or give it to a different person.
The manufacturer is not responsible if an incorrect installation and use causes damage.
Children and vulnerable persons safety
• Do not let persons, children included, with reduced physical sensory, reduced mental
functions or lack of experience and knowledge to use the appliance. They must have
supervision or instruction for the operation of the appliance by a person who is responsible for their safety.
• Keep all packaging away from children. There is the risk of suffocation or injury.
• Keep all detergents in a safe area. Do not let the children touch the detergents.
• Keep children and pets away from the appliance when the door is open.
General safety
• Do not change the specifications of this appliance. There is the risk of injury and dam-
age to the appliance.
• Obey the safety instructions from the detergent manufacturer to prevent burns to
eyes, mouth and throat.
• Do not drink the water from the appliance. Particles of detergent can stay in your ap-
pliance.
• Do not keep the appliance door open without supervision. This to prevent injury and
to fall on an open door.
• Do not sit or stand on the open door.
3
Use
• The appliance is only for domestic use. Do not use the appliance for other uses to pre-
vent injury to persons and damage to property.
• Only use the appliance to clean accessories that are applicable for dishwashers.
• Do not put flammable products or items that are wet with flammable products in,
near or on the appliance. Risk of explosion or fire.
• Put the knives and all items with sharp points in the cutlery basket with their points
down. If not, put in a horizontal position in the upper basket or in the knife basket.
(Not all models have the knife basket).
• Use only specified products for dishwashers (detergent, salt, rinse aid).
• Types of salt that are not specified for dishwashers can cause damage to the water
softener.
• Fill the appliance with salt before you start a washing programme. Remaining salt in
the appliance can cause corrosion or make a hole in the bottom of the appliance.
• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher
cleaning agent, liquid detergent). This can cause damage to the appliance.
• Make sure that the spray arms can move freely before you start a washing programme.
Safety information
4
• The appliance can release hot steam if you open the door while a washing programme
operates. There is a risk of skin burns.
• Do not remove the dishes from the appliance until the washing programme is completed.
Care and cleaning
• Before you clean the appliance, deactivate it and disconnect the mains plug from the
mains socket.
• Do not use flammable products or products that can cause corrosion.
• Do not use the appliance without the filters. Make sure that the installation of the
filters is correct. An incorrect installation causes unsatisfactory washing results and
damage to the appliance.
• Do not use spray water or steam to clean the appliance. Risk of electrical shock and
damage to the appliance.
Installation
• Make sure that the appliance is not damaged. Do not install or connect a damaged
appliance, contact the supplier.
• Remove all packaging before you install and use the appliance.
• Only a qualified person must do the electrical connection, the plumbing and the instal-
lation of the appliance. This to prevent the risks of structural damage or injury.
• Make sure that the mains plug is disconnected from the mains socket during installation.
• Do not drill into the sides of the appliance to prevent damage to hydraulic compo-
nents and electrical components.
•
Important! Obey the instructions in the template supplied with the appliance:
– To install the appliance.
– To assemble the door panel.
– To connect to the water supply and drain.
• Make sure that the appliance is installed below and adjacent to safe structures.
Frost precautions
• Do not install the appliance where the temperature is less than 0 °C.
• The manufacturer is not responsible for frost damage.
Water connection
• Use new hoses to connect the appliance to the water supply. Do not use used hoses.
• Do not connect the appliance to new pipes or pipes not used for a long time. Let the
water flow for some minutes, then connect the inlet hose.
• Make sure not to squash or cause damage to the water hoses when you install the
appliance.
• Make sure that the water couplings are tight to prevent a water leakage.
• The first time you use the appliance, make sure that the hoses do not have water leaks.
• The water inlet hose has a safety valve and a double sheath with an inner mains cable.
There is pressure in the water inlet hose only when the water flows. If there is a leak in
the water inlet hose, the safety valve interrupts the flow of water.
– Be careful when you connect the water inlet hose:
– Do not put the water inlet hose or the safety valve in water.
Safety information
– If the water inlet hose or the safety valve are damaged, immediately disconnect
the mains plug from the mains socket.
– Contact the service centre to replace the water inlet hose with safety valve.
WARNING!
Dangerous voltage.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with the power
supply.
• Always use a correctly installed shockproof socket.
• Do not use multiple plugs and extension cables. There is a risk of fire.
• Do not replace or change the mains cable. Contact the service centre.
• Make sure not to squash or cause damage to the mains plug and cable behind the
appliance.
• Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
5
Internal lamp
This appliance has an internal lamp that comes on when you open the door and goes off
when the door is closed.
WARNING!
Visible led radiation, do not look directly into the beam.
The LED of the lamp is CLASS 2 and agrees with IEC 60825-1: 1993 + A1:1997 + A2:2001.
Emission wave length: 450 nm
Maximum emitted power: 548 μW
To replace the internal lamp, contact the service centre.
Disconnect the mains plug from the mains socket before the replacement of the internal
lamp.
Service centre
• Only a qualified person can repair or work on the appliance. Contact the service centre.
• Use only original spare parts.
Product description
6
To discard the appliance
• To prevent the risk of injury or damage:
– Disconnect the mains plug from the mains socket.
– Cut off the mains cable and discard it.
– Remove the door catch. This prevents children or pets to be closed in the appliance.
There is a risk of suffocation.
– Discard the appliance at the local waste disposal centre.
WARNING!
The dishwasher detergents are dangerous and can cause corrosion !
• If an accident occurs with these detergents, contact immediately a physician.
• If the detergent gets into the mouth, contact immediately a physician.
• If the detergent gets into the eyes, contact immediately a physician and clean the eyes
with water.
• Keep dishwasher detergents in a safe area and out of children touch.
• Do not keep the appliance door open when there is detergent in the detergent dispenser.
• Fill the detergent dispenser only before you start a washing programme.
PRODUCT DESCRIPTION
1
10
2
3
4
5
1 Upper basket
2 Water hardness dial
3 Salt container
4 Detergent dispenser
5 Rinse aid dispenser
6 Rating plate
7 Filters
9
8
7
6
Control panel
8 Lower spray arm
9 Upper spray arm
10 Top spray arm
CONTROL PANEL
The controls are on the top on the control panel. To operate with the controls, keep the
appliance door ajar.
Messages in the display and acoustic signals help you to operate with the appliance.
5
7
1
1 On/off button
2 Menu buttons (up and down)
3 Display
4 OK START button
5 OPTION button
2
3
4
On/off button
Press this button to activate or deactivate the appliance.
After ten minutes from the end of the washing programme, the AUTO OFF function automatically deactivates the appliance. This helps to decrease energy consumption.
Menu buttons
Press these buttons to go through the menu option and the menu washing programmes.
OK START button
Press this button to confirm a function and to start a washing programme.
OPTION button
Press this button to open and close the menu option.
Setting a function
1. Activate the appliance.
2. Press the OPTION button to open the menu option.
3. Press one of the menu buttons to go through the menu option.
4. Press the OK START button to confirm a function or open the submenu.
5. Press one of the menu buttons to go through the submenu.
6. Press the OK START button to confirm.
7. Press the OPTION button to close the menu option.
Control panel
8
Menu option
DELAY START You can delay the start of the
EXTRA HYGIENE ON
MULTITAB ON
SETTINGS LANGUAGE ENGLISH
WATER HARDNESS
RINSE AID You can activate the rinse aid
SOUND VOLUME You can adjust the volume of
BRIGHTNESS
Menu Submenu Description of the function
washing programme from 1 to
24 hours.
OFF
OFF
(Different languages are available).
(10 levels are available).
(10 levels are available).
This function gives better results for the hygiene. During
the rinsing phase, the temperature stays at 70 °C for 10 to
14 minutes.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5
in 1'), use the multitab function. Refer to 'Multitab function'.
You can set the language of
the messages in the display.
You can adjust the level of the
water softener. Refer to 'Setting the water softener'.
Factory setting: 5.
dispenser. This function is
available only when the multitab function is on.
all the audible signals.
5 levels are available.
Level 0 = volume off.
You can change the intensity
of the display.
10 levels are available.
Factory setting: 10.
Display
Use of the appliance
1 The status bars show the status of the washing programme.
2 This area shows messages, washing programmes, functions and washing pro-
gramme phases.
3 This area shows the function symbols.
Symbols
DELAY START
It comes on when you activate the delay start.
MULTITAB
It comes on when you activate the function.
SOUND VOLUME
It comes on when the acoustic signals are off.
EXTRA HYGIENE - comes on when the related function and/or the
It comes on when you activate the function or when you set the INTENSIVE PRO washing
programme.
9
USE OF THE APPLIANCE
Activating the appliance for the first time
1. Activate the appliance.
2. The display shows the default language: LANGUAGE ENGLISH.
• Press the OK START button to confirm the default language
• Press one of the menu buttons to set a different language and then press the OK
START button to confirm.
3. Press the OPTION button to close the menu option.
Using the appliance
1. Be sure that the set level of the water softener agrees with the water hardness in
your area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
Setting the water softener
10
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function. Refer to 'Multitab function'.
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. These minerals and
salts can cause damage to the appliance.
Adjust the level of the water softener if this does not agree with the water hardness in
your area.
Contact your local water authority to know the water hardness in your area.
Water hardness
German degrees
(°dH)
51 - 70 91 - 125 9,1 - 12,5 64 - 88
43 - 50 76 - 90 7,6 - 9,0 53 - 63
37 - 42 65 - 75 6,5 - 7,5 46 - 52
29 - 36 51 - 64 5,1 - 6,4 36 - 45
23 - 28 40 - 50 4,0 - 5,0 28 - 35
19 - 22 33 - 39 3,3 - 3,9 23 - 27
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
< 4 < 7 < 0,7 < 5
1) Factory position.
2) Do not use salt at this level.
French degrees
(TH°)
mmol/l Clarke de-
grees
You must adjust the water softener manually and electronically.
Water hardness ad-
manually elec-
2
2
2
2
2
2
1
justment
1)
1)
1)
1)
1)
1)
2)
troni-
cally
10
9
8
7
6
1)
5
2)
1
Use of dishwasher salt
Manual adjustment
Turn the water hardness dial to the position 1 or
2 (refer to the table).
Electronic adjustment
1. Open the menu option.
2. Go to SETTINGS .
3. Press the OK START button to open the submenu.
4. Go to WATER HARDNESS .
5. Press the OK START button.
6. Set the level of the water softener.
7. Press the OK START button.
8. Press the OPTION button to close the menu option.
USE OF DISHWASHER SALT
Filling the salt container
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of water (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
When it is necessary to fill the salt container,
the display shows the message REFILL SALT .
The message does not show while a washing programme operates.
After you fill the salt container, the display can continue to show the message for some
hours. This does not have an unwanted effect on the operation of the appliance
It is correct that water comes out from the salt container when you fill it with salt.
11
20
30
M
A
X
1
2
3
4
+
-
Use of detergent and rinse aid
12
USE OF DETERGENT AND RINSE AID
1
2
7
3
4
6
5
Use of detergent
To help the environment, do not use more than the correct quantity of detergent.
Obey the instructions on the detergent packaging.
How to fill the detergent dispenser:
1.
Press the release button
2.
Put the detergent in the dispenser
3. If the washing programme has a prewash phase, put a small quantity of detergent
on the inner part of the appliance door.
4.
If you use the detergent tablets, put the tablet in the detergent dispenser
5. Close the detergent dispenser. Press the lid until it locks into position.
Use long washing programmes when you use the detergent tablets. These cannot fully
dissolve with short washing programmes and can decrease the washing results.
2
to open the lid 7 of the detergent dispenser.
1
.
1
.
Use of rinse aid
Rinse aid makes it possible to dry the dishes without streaks and stains.
The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1.
Press the release button
2.
Fill the rinse aid dispenser
3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the washing programme.
6
to open the lid 5 of the rinse aid dispenser.
3
with rinse aid. The mark 'max' shows the maximum level.
4. Close the rinse aid dispenser. Press the lid until it locks into position.
When it is necessary to fill the rinse aid dispenser, the display shows the message REFILL
RINSE AID . The message does not show while a washing programme operates.
Adjust the rinse aid dosage
Factory set: position 3.
Multitab function
You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage).
Turn the rinse aid selector
4
to increase or decrease the dosage.
MULTITAB FUNCTION
The multitab function is for combi detergent tablets.
These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of
tablets can contain other agents.
Be sure that these tablets are applicable for the water hardness in your area (refer to the
instructions on the packaging of the products).
The multitab function deactivates the flow of rinse aid and salt.
The multitab function deactivates the salt and the rinse aid messages.
The programme duration can increase if you use the multitab function.
Activate or deactivate the multitab function before the start of a washing programme.
You cannot activate or deactivate the function when a washing programme operates.
To activate the multitab function
1. Open the menu option.
2. Go to MULTITAB and activate the multitab function.
• When you activate the multitab function, it stays on until you deactivate it.
3. Press the OK START button.
4. Press the OPTION button to close the menu option.
To deactivate the multitab function and use separately detergent, salt and rinse aid
1. Open the menu option.
2. Go to MULTITAB and deactivate the multitab function.
3. Press the OK START button.
4. Press the OPTION button to close the menu option.
5. Fill the salt container and the rinse aid dispenser.
6. Adjust the water hardness to the highest level.
7. Start a washing programme without dishes.
8. When the washing programme is completed, adjust the water softener to the water
hardness in your area.
9. Adjust the quantity of rinse aid.
13
LOADING CUTLERY AND DISHES
Refer to the leaflet 'Examples of ProClean loads'.
Hints and tips
• Do not put in the appliance items that can absorb water (sponges, household cloths).
• Remove the remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the opening down.
Loading cutlery and dishes
14
• Make sure that water does not collect in containers or in bowls.
• Make sure that cutlery and dishes do not bond together.
• Make sure that the glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to prevent them to bond together.
• When you put the items in the baskets, make sure that the water can touch all surfaces.
• Put light items in the upper basket. Make sure that the items do not move.
• Water droplets can collect on plastic items and non-stick pans.
Beer glass holders
The beer glass holders prevent beer glasses to
move while a washing programme operates.
If you do not use the holders, fold them up or remove them. You can also remove the support.
WARNING!
Be careful when you disengage or engage the support.
To remove the holders and the support, do these steps:
1. Disengage the holders from the support
and remove them.
2. Push the support to the rear part of the
basket to disengage it.
To engage the holders and the support, do these steps:
1. Push the support to the front part of the
basket to engage it.
2. Engage the holders on the support.
WASHING PROGRAMMES
Washing programmes
15
Programme Type of soil Type of load Programme descrip-
tion
1)
AUTOMATIC
All Crockery, cut-
lery, pots and
pans
Prewash
Wash 45 °C or 70 °C
Rinses
EXTRA HYGIENE
function
Yes, with effect.
Dry
2)
30 MINUTES
Fresh soil Crockery and
cutlery
INTENSIV PRO Heavy soil Crockery, cut-
lery, pots and
pans
Wash 60 °C
Rinse
Prewash
Wash 70 °C
Rinses
Dry
Yes, with effect.
This washing programme includes
the EXTRA HYGIENE function. It
is not necessary
to set the function.
ENERGY
3)
Normal soil Crockery and
cutlery
Prewash
Wash 50 °C
Yes, with effect.
Rinses
Dry
50 MINUTES Light soil Crockery and
cutlery
45° GLASS Normal or
light soil
Delicate crockery and glassware
PLATE WARM-ERThis programme makes the
dishes warm before use or re-
Wash 55 °C
Yes, with effect.
Rinses
Wash 45 °C
Rinses
Yes, without effect.
Dry
Rinse Yes, without ef-
fect.
moves the dust from dishes not
used for a long time.
Do not use detergent with this
programme.
PREWASH Use this programme to quickly
rinse the dishes. This prevents
Rinse Yes, without ef-
fect.
the remaining food to bond on
the dishes and bad odours to
come out from the appliance.
Do not use detergent with this
programme.
EXTRA SILENT
Normal soil Crockery and
cutlery
Prewash
Wash 50 °C
Yes, without ef-
fect.
4)
Rinses
Dry
1) The appliance adjusts automatically the temperature and the quantity of the water. This depends if the
appliance has a full load or not and on the degree of soil. The programme duration and the programme
consumptions can change.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
Loading...