Campbell Hausfeld DH7600 User Manual

Size:
650.64 Kb
Download

Air Tools

Spray Guns

Gravity-FeedSpray Gun

DH7800

Designed to provide optimal atomization and particle size

Stainless fluid needle and nozzle are compatible with today’s advanced coatings

600 milliliter acetal cup allows viewing of paint fluid level while providing chemical resistance and easy cleaning

In-line80 mesh filter removes dirt particles from paint, preventing defects

Includes adjustable fluid, pattern and air controls

5.9AVG. SCFM Requirement @ 40 PSI

Gravity-FeedTouch-upSpray Gun

DH7600

Stainless steel fluid needle and nozzle for corrosion-resistantlife

In-linepaint filter removes dirt particles from paint, preventing defects

See-throughcup allows viewing of paint fluid level

Includes adjustable fluid, pattern and air controls

2.5AVG. SCFM Requirement @ 40 PSI

High Volume Low Pressure (HVLP)

Spray guns operate at lower air cap pressures than conventional spray guns (below 10 PSI). Atomized paint from an HVLP spray gun is delivered to the work surface at lower velocities than conventional spray guns, reducing bounceback and overspray. This results in a higher transfer efficiency of material, reducing paint consumption by 20-30%.

HVLP Gravity-FeedSpray Gun

DH7900

Designed to provide optimal atomization and particle size

Stainless fluid needle and nozzle are compatible with today’s advanced coatings

600 milliliter acetal cup allows viewing of paint fluid level while providing chemical resistance and easy cleaning

In-line80 mesh filter removes dirt particles from paint, preventing defects

• Includes adjustable fluid and pattern controls

6.2 AVG. SCFM Requirement @ 40 PSI

30

Visit us online: www.chpower.com

 

 

 

Spray Guns

Why Use Spray Guns?

Spraying offers quality finishes on a consistent basis. Spray guns offer several advantages over wiping, brushing or rolling on a paint finish. These include speed, versatility, control, ease of repair, simplicity and consistency of application.

HVLP Gravity-FeedTouch-upSpray GunDH7700

Stainless steel fluid needle and nozzle for corrosion-resistantlife

HVLP increases transfer efficiency and reduces paint consumption

In-linepaint filter removes dirt particles from paint, preventing defects

See-throughchemical-resistantcup allows viewing of paint fluid level

Includes adjustable fluid and pattern

controls

2.8 AVG. SCFM Requirement @ 40 PSI

Siphon-FeedSpray Gun

DH6500

Great choice in an economical spray gun

Produces a fine finish for most automotive, furniture and equipment painting

Pattern control adjusts fan size

Includes 1 qt. anti-dripcanister

7.0AVG. SCFM Requirement @ 40 PSI

Tools Air

Siphon-FeedSpray Gun

DH7500

Designed to provide optimal atomization and particle size

Stainless fluid needle and nozzle are compatible with today’s advanced coatings

Built-inair adjusting valve provides easy adjustment at tool

Includes 1 qt. anti-dripcanister

6.3AVG. SCFM Requirement @ 40 PSI

Model

Fluid

Fluid tip

Paint Viscosity

Adjustment Fan Pattern

Canister

No.

Delivery Type

(in./mm)

Range

Controls

Size

Size

DH7800

Gravity

.055/1.4

Low-Med.

Pattern/Material/Air

1.5-11

600 ml

 

 

 

 

 

 

 

DH7600

Gravity

.025/1.0

Low-Med.

Pattern/Material/Air

.75-6.0

5 oz.

DH7900

Grav./HVLP

.055/1.4

Low-Med.

Pattern/Material

1.5-10

600ml

 

 

 

 

 

 

 

DH7700

Grav./HVLP

.025/1.0

Low-Med.

Pattern/Material

.75-5.0

5 oz.

DH6500

Siphon

.071/1.8

Very Low-Med.

Pattern/Material

1.5-9.5

1 qt.

 

 

 

 

 

 

 

DH7500

Siphon

.071/1.8

Very Low-Med.

Pattern/Material

1-10

1 qt..

Or call CH Air Tools at: 1-800-543-6400

31

 

Spray Guns

Air Tools

Siphon-FeedDetail Spray Gun

DH5500

Provides full size pattern in a small package

Nickel plated body provides easy clean-up

Features both fluid and pattern controls

Includes 8 fl. oz canister

4.2AVG. SCFM Requirement @ 40 PSI

Pressure-FeedSpray Gun

DH3800

Pressure-feeddesign sprays low to high viscosity materials

Ball burnished finish allows for easy clean-up

2.0AVG. SCFM Requirement @ 40 PSI

Basic Spray Gun

DH3200

Pressure-feeddesign sprays low to high viscosity materials

Bleeder design operates with most tankless air compressors

Fluid control regulates amount of paint sprayed

2.7AVG. SCFM Requirement @ 40 PSI

General Purpose Spray Gun

DH4200

Changes from siphon to pressure-feedfor use with a variety of materials

Convertible from non-bleederto bleeder style for use with standard or tankless air compressors

Works with paint tanks and remote canisters

2.0AVG. SCFM Requirement @ 40 PSI

32

Visit us online: www.chpower.com

 

 

 

Spray Guns

General Purpose Spray Gun

DH5300

Easily changes from siphon to pressure-feedwith the twist of a knob for use with a variety of materials

Pattern control adjusts fan size for better results

Convertible from non-bleederto bleeder style for use with standard or tankless air compressors

Works with paint tanks and remote canisters

4.3AVG. SCFM Requirement @ 40 PSI

Pressure-FeedSpray Gun System

DH6600

Remote canister allows spraying in tight areas for better maneuverability

Sprays in any position for added convenience

Includes 2 qt. pressure canister, regulator and 6’ air and material hoses

7.0AVG. SCFM Requirement @ 40 PSI

Air Brush Set

MP2900

Paints fine lines for pin striping, graphics, detailing, modeling, and more

Dual action trigger allows the user to vary the line width while spraying

Includes a protective cap, 22cc cup, 5cc metal cup, 60cc mix jar with lid, 6’ air hose with adapter, hanger, and molded case

.23 AVG. SCFM Requirement @ 40 PSI

Tools Air

21/2 Gallon Stainless Steel Paint TankPT2813

Bucket holds 2 1/2 gallons of paint for longer spraying between refills

Tank accepts 1 gallon paint can for added convenience

Compatible with most paint materials and solvents

Includes tank pressure regulator, gauge, safety valve, and 15’ material hose and air hose

Model

Fluid

Fluid tip

Paint Viscosity

Adjustment

Fan Pattern Canister

No.

Delivery Type

(in./mm)

Range

Controls

Size

Size

DH5500

Siphon

.071/1.8

Very Low-Med.

Pattern/Material

1.5 -9

8 oz.

 

 

 

 

 

 

 

DH3800

Pressure

.050/1.3

Low-High

Material

6.5

1 qt.

DH3200

Pressure

.049/1.2

Low-High

Material

6.5

1 qt.

 

 

 

 

 

 

 

DH4200

Pressure/Siphon

.050/1.3

Low-High

Material

6.5

1 qt.

DH5300

Pressure/Siphon

.050/1.3

Low-High

Pattern/Material

1- 8

1 qt.

 

 

 

 

 

 

 

DH6600

Pressure

.039/1.0

Low-High

Pattern/Material

1-9

2 qt.

MP2900

Siphon

.015/0.38

Low

Material/Air

---

60cc,22cc,5cc

Or call CH Air Tools at: 1-800-543-6400

33