Zyxel NWD-370 Installation Guide

ENGLISH

ENGLISH

Overview

The NWD-370N is a wireless network adapter for your
desktop computer. See page 12 for a list of system
requirements.

1 Install the Software

" Install the software from the CD before you

insert the NWD-370N. Do not insert the NWD­370N yet.

If you have already installed Funk Odyssey
Client software on the computer, uninstall
(remove) it.

1 Remove the NWD-370N if you already inserted it.

2 Insert the included CD into the CD-ROM drive on your

computer.

1

ENGLISH

3 When the following screen displays, click Setup to install

the ZyXEL utility and driver.

V If the screen does not display, locate and

double-click autorun.exe on the CD.

2

ENGLISH

4 When the following screen displays, click Next.

5 Select Driver and Utility to install both the ZyXEL utility

and the driver on your computer. If you want to install the
driver only and use Wireless Zero Configuration (WZC)
with Windows XP, select Driver only (see Note for

3

ENGLISH

Windows XP Users). Click Next to accept the default file

location or click Browse to select an alternate folder.

6 Click Install.

4

ENGLISH

" You will need to restart your computer after

installing the ZyXEL utility. Make sure you have
saved your work before continuing.

7 When the following screen displays, select No, I will

restart my computer later. You will turn your computer off in

order to install the hardware.

Click Finish to complete the software installation.

5