LTE7460-M608
4G LTE-A Outdoor Router
As mobile devices such as smart phones and tablets consume more wireless
broadband, the crowded bandwidths have become a big issue to operators.
Mobile broadband is a better solution than fixed-line broadband for its lower
investment and faster deployment. However, since fixed lines have been
the major broadband infrastructure in most places of the world for a long
time, people are already using fixed lines for broadband Internet connection
in most cases. Migrating from fixed lines to mobile broadband may need
extensive evaluation, however adding mobile broadband as a backup for
better performance or stability could be an easier decision.
The Zyxel LTE7460-M608 4G LTE-A Outdoor Router comes with what the
critical feature, “the second WAN”, needs – flexible routing mode with
both bridge and router functions, high-gain antenna for better signal and
performance as well as robust IP65 outdoor hardware designed for harsh
environments. No matter you have a router device or not, the LTE7460-M608
can be easily deployed and integrated into your existing environment.
You can set LTE as your main connection or use LTE as a backup when
performance of the main connection drops. The LTE7460-M608 is good for
any venue like suburban areas, public locations, homes and offices. Enjoy LTE
technology with minimum effort with the LTE7460-M608.
Benefits
State-of-the-art technology
The Zyxel LTE7460-M608 4G LTE-A Outdoor
Router employs 3GPP Release 10, Category 6 –
the best-practice LTE technology with 300/50
Mbps (DL/UL) data rates through carrier
y
r
e
V
LTE CAT6
300 Mbps
M
w
o
L
w
o
L
e
r
a
d
t
o
e
H
i
g
h
V
e
r
y
H
i
g
h
Ultra fast Internet with Cat 6
LTE with carrier aggregation
Download speeds of up to
300 Mbps
Embedded bridge/router
mode
Built-In multi-band, high-gain
antenna of up to 8 dBi
Standard 802.3af Power over
Ethernet (PoE)
IP 65 hardened enclosure with
Industrial grade components
Datasheet LTE7460-M608
aggregation approbation. It also supports 3G/2G networks
with the up-to- date “Dual Carrier HSPA+ (DC-HSPA+)”
technology with 42/5.76 Mbps (DL/UL) data rates. You can
Embedded bridge/router mode adapts to all
kinds of devices/gateways
For better network integration, Zyxel embeds both bridge
and router modes into the LTE7460-M608. While users
can take advantage of the built-in routing functions in all
typical applications, the bridge mode is designed to work
with users’ existing or preferred devices such as
Internet
Bridge
enjoy ultra-fast, flexible wireless connection anywhere
within the LTE/3G/2G signal coverage.
high-end Wi-Fi Access Points, Small Business Gateways or
Enterprise Gateways. With the two built-in modes, the Zyxel
LTE7460-M608 can be easily integrated with all kinds of
devices/gateways.
24/7
Router
365
ATM
Built-In multi-band antenna
Zyxel’s LTE7460-M608 4G LTE-A Outdoor Router provides
multi-band embedded antennas of up to 8 dBi that work
effectively in outdoor environments. The outdoor-friendly
Suburban
Home/Indoor
Software upgrades over-the-air
Through the LTE radio interface, the Zyxel LTE7460-M608
supports TR-069 has full over-the-air configuration and
design makes it possible to work in near non-line-of-sight
conditions where desirable signal strength was difficult to
achieve.
Business
Ferry Boats
software upgrade capability through events triggered by
the operators.
Operators
2Datasheet LTE7460-M608
Non-stop connectivity with LTE 2nd WAN
for fail-over
Multi-WAN fail-over relieves the risk of network outage
caused by dependence on single-WAN technology. Even
better, LTE is wireless so you can get the second WAN
without an additional cabling plan. As long as the gateway
supports “multi-WAN fail-over”, you can just connect the
Zyxel LTE7460-M608 to the existing gateway and set LTE as
the fail-over WAN.
Internet
Application Diagram
LTE7460-M608
Business
LTE 4G
Wire Broadband Access
Router
LTE7460-M608
Home
Laptop
Smartphone/
Tablet PC
SBG or USG
Series
LTE7460-M608
3G/LTE Base Station
3G/LTE
WAC6553D-E
Suburban
Smartphone/
Tablet PC
PoE
Injector
Wireless AP
or Router
Laptop
Desktop
3G/LTE
Wi-Fi
3Datasheet LTE7460-M608
Specifications
System Specifications
IP Networking
• Support IPv4/IPv6 dual stack
(NDP IPv6)
• DHCP server
• ICMP supported
• Bridge/Router mode supported
• Virtual Private Network (VPN)
pass through
Network Address Translation (NAT)
Traversal
• Support NAT/NAPT
• Support DMZ
• Support port forwarding
• Support ALG
• Support DDNS
IP Firewall
• DoS Attack Prevention
• Support SPI
• Application-Level Firewall (LAN to
WAN such as FTP, HTTP, Telnet, Ping)
Management
• Support Local/Remote Web
management and web online
firmware upgrade
• Support TR069 and TR069 remote
firmware upgrade
• SMS management
• APN/PIN management
• PIN/PUK management
• Network selection
• Network preference
• Operating frequency band selection
(support Cat 4 only)
Hardware Specifications
LTE Interface
• Standard compliant: 3GPP Release
10 Category 6
• Supported frequency:
Band LTE 1/3/7/8/20/38/40 LTE TDD 2300/2600 MHz
LTE FDD 2600/2100/1800/900/
800 MHz
• Carrier aggregation conguration:
■
B1+B3*, B1+B7*
■
B1+B1, B1+B8, B1+B20
■
B3+B3, B3+B7, B3+B8, B3+B20
■
B7+B7, B7+B8, B7+B20
■
B38+B38, B40+B40
• FDD LTE peak data rate:
■
300 Mbps DL within 40 MHz
bandwidth (CA)
■
50 Mbps UL within 20 MHz
bandwidth
• TDD LTE peak data rate:
■
224 Mbps DL within 40 MHz
bandwidth (CA)
■
10 Mbps UL within 20 MHz
bandwidth
UMTS/EDGE/GPRS/GSM Air Interface
• Standard compliant: WCDMA Rel’99
and Rel’10 DC-HSPA+; GSM/GPRS/
EGPRS Rel’99
• Supported frequency:
■
UMTS band 1/8
■
EDGE/GPRS/GSM band 2/3/5/8
■
DC-HSPA+ downlink data rate up
to 42 Mbps
■
HSUPA uplink data rate up to
5.76 Mbps
■
UMTS data rate up to 384 kbps
■
EDGE data rate up to 236.8 kbps
■
GPRS data rate up to 85.6 kbps
Physical Specifications
• Dimensions (WxDxH):
254 x 255 x 58 mm
• Weight: 1.1 kg
• The mounting kits
Environmental Specifications
• IP65 Enclosures
Operating Environment
• Temperature:
-40°C to 60°C (-40°F to 140°F)
• Humidity:
5% to 95% (Non-condensing)
Storage Environment
• Temperature:
-40°C to 70°C (-40°F to 158°F)
• Humidity:
5% to 95% (Non-condensing)
Certification
• RF:
■
EN301511
■
EN301908-1
■
EN301908-2
■
EN301908-1
■
EN301908-13
• Safety:
■
EN62311
■
EN62209-2
• EMC:
■
EN55022
■
EN55024
■
EN301489-1-7-24
*Supports to B1+B3 and B1+B7 are only available
on LTE7460-M608-EU01V2F and LTE7460-M608-
EU022F
Antennas
• 2 embedded antennas of up to 8 dBi
Power Specifications
• Standard 802.3 af power over
Ethernet
• Power consumption at jack: < 10 W
For more product information, visit us on the web at www.zyxel.com
Copyright © 2017 Zyxel Communications Corp. All rights reserved. Zyxel, Zyxel logo are registered
trademarks of Zyxel Communications Corp. All other brands, product names, or trademarks mentioned
are the property of their respective owners. All specifications are subject to change without notice.
Datasheet LTE7460-M608
5-100-01417013 11/17
Loading...