Zanussi FLI1003 Manual

0 (0)

INSTRUCCIONES PARA INSTALACION Y USO INSTRUÇÕES PARA A INSTALAÇÃO E A UTILIZAÇÃO

INSTALLATION AND INSTRUCTION MANUAL

LAVADORA

MÁQUINA DE LAVAR ROUPA

WASHING MACHINE

FLI 1003

124978890

CONTENTS

Warnings . . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

31

Installation . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

32

Transit devices . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

32

Positioning. . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

32

Water inlet . . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

32

Water drainage . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

33

Electrical connection . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

33

Building-in . . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

34

Use. . . . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

35

Control panel . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

35

Detergent dispenser drawer. . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

35

Controls . . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

35

Washing hints . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

36

Detergents and additives . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

37

Washing programmes . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

38-39

International wash code symbols . . . . .

. . .

. . .

. . .

. . .

.

.

Page

40

Operating sequence . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

41

Maintenance . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

42

Bodywork . . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

42

Detergent dispenser drawer. . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

42

Drain filter . . . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

42

Water inlet filter . . . . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

42

Something not working? . . . . . . .

. . .

. . .

. . .

. . .

.

.

Page

43

TECHNICAL SPECIFICATIONS

DIMENSIONS

Height

82 cm

 

Width

60 cm

 

Depth

54 cm

 

 

POWER SUPPLY VOLTAGE/FREQUENCY

220-230V/50 Hz

TOTAL POWER ABSORBED

 

2200 W

MINIMUM FUSE PROTECTION

 

10 A

 

 

 

WATER PRESSURE

Minimum

5 N/cm2

 

Maximum

80 N/cm2

MAXIMUM LOAD

Cotton

5 kg

 

Synthetics, delicate fabrics

2 kg

 

Woollens

1 kg

 

 

 

SPIN SPEED

 

1000 rpm

 

 

This appliance complies with the following EEC Directives:

 

73/23/EEC of 19/02/73 relating to low voltage

 

89/336/EEC of 03/05/89 relating to electromagnetic compatibility

 

30

WARNINGS

It is important that this instruction book be kept with the appliance for future reference. If you sell or give the appliance away, make sure that the book is passed to the new owners so that they can familiarise themselves with its operation and relevant warnings.

The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance.

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.

INSTALLATION

All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book.

Any electrical work required to install this appliance must be carried out by a qualified electrician.

Any plumbing work required to install this appliance must be carried out by a qualified plumber.

After having installed the machine, check that it is not standing on its electrical supply cable.

If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the adjustable feet and the floor.

USE

Always check that water has emptied out before opening the door. If not, drain the water following the instructions in the instruction book.

Always unplug the appliance and shut the water tap after use.

SERVICE/REPAIR

In the event of a fault, do not attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause damage.

If repairs are needed, contact an authorised service centre and ask for genuine spare parts.

SAFETY

This appliance is designed to be used by adults. Children must not be allowed to touch the controls or play with the product.

During high temperature wash cycles the glass door becomes very hot. Do not touch it.

Pets sometimes climb into washing machines. Check the drum before each use.

PROTECTION OF THE ENVIRONMENT

Materials marked with the symbol are recyclable. To enable them to be recycled, they must be placed in the appropriate collection areas (or containers). Check with your local authorities.

>PE<= polyethylene >PS<= polystyrene >PP<=polypropylene

This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.

Do not overload the appliance. Follow the instructions in the instruction book.

Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.

Make sure that all pockets are empty. Objects such as coins, safety pins, pins and screws can cause extensive damage.

Do not machine wash garments saturated with petroleum, methylated spirits, trichlorethylene, etc. If such fluids have been used to remove stains prior to washing, wait until they have completely evaporated from the fabric before placing garments in the appliance.

Place small items such as socks, belts, etc. in a cloth bag or pillowcase to prevent them getting trapped between the drum and the tub.

Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry.

Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells.

When the appliance is to be scrapped, cut off the power supply cable and make the door closing device inoperative to avoid it becoming a death trap for a child.

PORTUGUÊ S

31

Zanussi FLI1003 Manual

INSTALLATION

Transit devices

All transit bolts and packing must be removed before using the appliance.

Proceed as follows:

P0255

P0457

Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

P0015

Remove the polystyrene base and take off the bottom panel by unscrewing the central screw. Carefully slide out the right polythene bag.

P0016

P0453

Repeat the operation for the left and central polythene bags.

Re-fit the bottom panel using the 4 screws supplied with the door hinges (in the plastic bag) and the previously removed screw.

P0256

P0020

Set the machine upright and remove the two remaining bolts from the back.

Pull out the three plastic pegs from the holes into which the bolts were fitted.

Plug the open holes with the plugs you can find on the back of the appliance.

Note: You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units.

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

After having levelled the machine, tighten the lock nuts.

P0254

P0509

Water inlet

Connect the water inlet hose to a tap with a 3/4" thread after having inserted the small filter “A” supplied with the machine.

The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.

A

P0003

P0021

The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.

32

Water drainage

The end of the drain hose can be positioned in three ways:

 

Hooked over the edge

 

of a sink using the

 

plastic hose guide sup-

 

plied with the machine.

 

In this case, make sure

 

the end cannot come

 

unhooked when the

 

machine is emptying.

 

This could be done by

P0022

tying it to the tap with a

piece of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground.

Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm.

The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose.

The drain hose must not be kinked. Run it along the floor; only the part near the drainage point must be raised.

P0023

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply.

Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use.

Connect the machine to an earthed socket, in accordance with current wiring regulations.

The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution.

PORTUGUÊ S

33

Loading...
+ 11 hidden pages