INSTRUCTION BOOK - NÁVOD K POUÎITÍ - INSTRUKCJA U˚YTKOWANIA - HASZNÁLATI UTASÍTÁS
BEDIENUNGSANLEITUNG
DISHWASHER |
1 - 8 |
GB |
MYÈKA NÁDOBæ |
9 -16 |
CZ |
ZMYWARKA |
17 - 24 |
PL |
MOSOGATÓGÉP |
25 - 32 |
HU |
GESCHIRRSPÜLER |
33 - 40 |
D |
DW 683
Technical specifications
5 |
Width |
60 cm |
Dimensions |
||
|
Height with worktop |
85 cm |
|
Height without worktop |
82 cm |
|
Max depth. |
60 cm |
|
Max depth with open door |
115.2 cm |
|
|
|
Electrical connection |
Voltage |
230 V - 50 Hz |
Motor rating during wash |
|
200 W |
Power of heating element |
|
2100 W |
Overall power |
|
2300 W |
|
|
|
Water supply pressure |
Minimum |
50 kPa (0.5 bar) |
|
Maximum |
800 kPa (8 bar) |
|
|
|
Capacity |
|
12 place settings |
|
|
|
The control panel
1.On/Off push button
2.Programme guide
3.Door handle
4.Programme marker
5.Programme selector dial
6.Programme sequence indicator
As the programme progresses, the programme selector dial turns, to show the phase in the wash programme the appliance has reached.
Prewash/RInse and hold
Wash
Cold rinse
Hot rinse
Drying
This appliance complies with the following E.E.C. Directives:
-73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;
-89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
152982 51/1
1
Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.
Installation
●This appliance is heavy. Care should be taken when moving it.
●It is dangerous to alter the specifications or attempt to modify this product in any way.
●Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
●Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
●Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
●The sides of the dishwasher must never be drilled to prevent damage to hydraulic components.
●Do not sit or stand on the open door.
●Isolate the appliance from the power supply and turn off the water supply after use.
●Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken.
●This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used.
●Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre.
Always insist on genuine spare parts.
Child Safety
●This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
●Keep all packaging well away from children.
●Keep all detergents in a safe place out of children's reach.
During Use
●Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.
●Under no circumstances should you open the door whilst the appliance is in operation. Always turn off the appliance before opening the door.
●Only use detergent specifically designed for use in dishwashers.
●Long bladed knives stored in an upright position are a potential hazard.
●Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
●When finishing loading or unloading close the door, as an open door can be a hazard.
Conservation
In the interest of the environment:
●Materials marked with the symbol 
are recyclable.
●Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.
●When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside.
●Help to keep your country tidy - use authorised disposal sites for your old appliance.
2
Installation
Remove all packaging before positioning the machine.
Any electrical and plumbing work required to install this appliance should be carried out by a qualified electrician and plumber or competent person.
If possible, position the machine next to a water tap and a drain.
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet.
If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the figure.
Proceed as follows:
570 - 600 820 600 
Remove the machine’s worktop by unscrewing the two |
|
|
|
||
rear retaining screws, pull from the front and slide out the |
|
|
|
||
|
|
|
|||
rear slots, lifting the worktop. |
IN05 |
IN26 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Insert the machine after adjusting height and levelling with the adjustable feet. |
|
|
|
||
When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
The water pressure must be within the limits given in the technical specifications. Your local Water Authority will advise you on the average mains pressure in your area.
The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation.
The locknut must be correctly fitted to avoid water leaks.
Avoid bends or kinks in the hose which could prevent or slow down the water supply.
Water outlet hose connection
Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.
If you use a drain hose extension it must be no longer than 2 metres. The drain hose can be connected in the following ways:
|
|
|
1 |
2 |
3 |
|
21 |
|
|
|
4cm |
Ø |
|
18 |
|
min |
|
|
Ø |
|
|||
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
max 100 cm |
CS17 |
|
|
|
|
|
Ø 18 |
Ø 21 |
|
+ 2 m max |
min 30 cm max 100 cm |
|
|
max100cm |
|
CS10 |
|
|
Electrical connection
Before plugging the appliance into the wall socket, make sure that:
1.The mains voltage corresponds to the voltage given in the "Technical specifications".
2.The meter, fuses, mains power supply and wall socket can all take the maximum load required.
Make sure that the socket and plug are compatible without having to use any type of adaptor. If necessary, have the domestic wiring system socket replaced.
Attention! Safety standards require the appliance to be earthed.
The manufacture accepts no liability for failure to observe the above safety precautions.
3
Loading...