DISHWASHER
DWS 909
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
152980 65/1 |
INSTRUCTION BOOK |
UK
Description of the appliance
1.Water hardness adjustment
2.Levelling spacers
3. |
Upper basket stop |
|
14 |
4. |
Salt container |
1 |
|
|
|
||
5. |
Large filter |
2 |
|
|
|
||
6. |
Detergent dispenser |
3 |
13 |
|
|||
7. |
Control panel |
|
12 |
8.Rating plate
9. |
Rinse aid dispenser |
4 |
11 |
|
|||
10. |
Central filter |
5 |
10 |
|
11.Lower spray arm
12. |
Upper spray arm |
|
|
13. |
Upper basket |
6 |
|
9 |
|||
|
|
14.Worktop
8
7
IN68
The control panel
1.ON/OFF indicator light
2.ON/OFF push button
3.Programme guide
4.Door handle
5.Programme marker
6.Programme selector dial
7. Programme sequence indicator
As the programme progresses, the programme selector dial turns, to show the phase in the wash programme the appliance has reached.
Prewash /Rinse and hold
Wash
Cold rinse
Hot rinse
Drying
2
Washing programmes
Programme |
Degree of soil |
Starting |
|
Require |
Recommended |
Cycle description |
||||
|
|
and |
position of the |
|
push button |
quantity of detergent |
|
|||
|
|
type of load |
programme |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
selector |
|
|
|
|
Wash |
Prewash |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cold prewash |
|
|
Normal soil |
|
|
|
|
|
|
|
Main wash up to 65°C |
* |
INTENSIVE |
|
|
|
|
|
|
|
1 cold rinse |
|
A |
|
On/Off |
|
|
|
|||||
|
|
25 g |
5 g |
|||||||
Crockery and cutlery |
|
|
||||||||
|
|
|
|
|
|
|
|
|
1 hot rinse |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drying |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Main wash up to 65°C |
NORMAL WASH |
Light soil |
B |
|
On/Off |
30 g |
/ |
1 cold rinse |
|||
Crockery and cutlery |
|
1 hot rinse |
||||||||
|
|
|
|
|
|
|
|
|
|
Drying |
|
|
|
|
|
|
|
|
|
|
|
|
|
Light soil |
|
|
|
|
|
|
|
Main wash up to 65°C |
** |
QUICK WASH |
Crockery and party |
C |
|
On/Off |
|
30 g |
/ |
1 cold rinse |
|
|
|
crockery |
|
|
|
|
|
|
|
1 hot rinse |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
RINSE |
Any. |
|
|
|
|
|
|
|
1 cold rinse (to avoid |
|
Partial load (to be |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
/ |
/ |
food scraps from |
||
|
D |
|
On/Off |
|
|
|||||
|
AND HOLD |
completed later in the |
|
|
||||||
|
|
|
|
|
|
|
|
sticking together). |
||
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
day).
*Testing programme for EN 50242 (see "Hints for Test Centres").
** This is a |
special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that |
you |
may re-use |
them promptly. |
|
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispe |
nser |
|||
|
|
|
|
|
|
Test standard: |
EN |
50242 |
|
|
|
|
|
|
|
Reference programme: |
INTENSIVE |
|
|
|
|
|
|
|
|
Load: |
|
12 standard place settings |
|
|
|
|
|
|
|
Rinse aid selector: |
position |
5 |
|
|
|
|
|
|
|
Detergent dosage: |
25 g in |
the dispenser |
|
|
|
|
5 g on the dispenser lid |
|
|
|
|
|
|
|
|
|
|
|
Arrangement upper basket |
|
|
Arrangement lower basket |
|
|
|
|
|
|
Arrangement cutlery basket
3
Operating sequence
1. Check the filters
Ensure they are clean and properly positioned (see "Maintenance and cleaning").
2.Check that there is rinse aid and salt
3.Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
4.Ensure that the spray arms can rotate freely.
5.Measure out detergent
Add the required amount of detergent into the dispenser according to the "Washing programmes" chart.
Close the detergent dispenser lid.
6.Close the dishwasher door
7.Set the programme
Turn the programme selector dial clockwise until the letter of the programme you wish to select corresponds with the programme marker on the control panel.
8. Start the programme
Depress the On/Off push button.
The On/Off indicator light will come on and the machine will start.
9. At the end of the washing programme
At the end of the programme the dishwasher will automatically stop.
The On/Off indicator light remains on until the On/Off push button is depressed.
10. Switch off the dishwasher
Switch off the dishwasher by pressing the On/Off push button and open the door.
Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.
Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops.
Important!
Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape.
4
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance.
Do not load very small items which can fall through the baskets.
The lower basket
The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely.
UI48 |
UI21 |
The two rear rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls.
To lower the prongs:
-Slightly pull them upward and let them drop down (see picture).
-To bring them back to the standing position, just pull them up again.
UI85 |
UI18 |
The cutlery basket
Long bladed knives stored in an upright position are a potential hazard.
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
Cutlery should be placed in the removable cutlery basket with the handles facing downwards.
If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
The cutlery basket is in two parts which can be separated to give greater loading flexibility.
To separate the two parts, slide them horizontally in opposite directions and pull them apart.
To reassemble, reverse the procedure.
UI62 |
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses.
Arrange items on and |
|
underneath the cup racks so |
|
that water can reach all |
|
surfaces. |
US64 |
Light items (plastic bowls
etc.) should be loaded in the upper basket and arranged so they do not move.
Before closing the door, ensure that the spray arms can rotate freely.
In case that plates are loaded in the upper basket:
load them starting from the rear positions of the basket, tilting them forwards and avoiding the front positions near the door.
US71
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1.Move the front runner stops (A) of the upper
basket outwards and slide the basket out.
2. Refit the basket in the higher position and replace the stops (A) in their original position.
When the top basket is in |
RC01 |
the higher position it will
only take plates up to 20 cm in diameter and you will not be able to use the raised cup racks.
After loading your machine always close the door, as an open door can be a hazard.
5
Adjusting the worktop
You can move the worktop forward or backward by
25 mm in order to align the machine with other kitchen units.
Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws.
IN26 |
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to
those shown in the picture.
570 |
- |
|
600 |
820 |
|
600 |
|
IN05 |
|
Proceed as follows:
-Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
Technical specifications
Dimensions |
Width |
|
|
60cm |
|
|
Height with worktop |
|
85 cm |
|
|
Height without worktop |
|
82 cm |
|
|
Max depth |
|
61 cm |
|
|
Max depth with open door |
|
115.2 cm |
|
|
|
|
|
Electrical connection |
Voltage |
|
220/240 |
V - 50 Hz |
Motor rating during wash |
|
|
|
200 W |
Power of heating element |
|
|
|
2100 W |
Overall power |
|
|
|
2300 W |
|
|
|
|
|
Water supply pressure |
Minimum |
|
50 kPa (0.5 bar) |
|
|
|
Maximum |
|
800 kPa (8 bar) |
|
|
|
|
|
Capacity |
|
|
|
12 place settings |
|
|
|
|
|
6