Zanker ZOB985, ZOB 985 Manual

5 (1)

Einbau-Backofen Inbouwfornuis Four à encastrer Built-in oven

ZOB 985

Bedienungsund Einbauanweisungen Gebruiksaanwijzing

Mode d'emploi Instruction booklet

English

Warnings - Built-in ovens

It is most important that the instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance.

Installation

Any installation work must be undertaken by a qualified electrician or competent person.

Installation and initial adjustment of your oven MUST be carried out by qualified personnel in compliance with current regulations. Specific installation instructions for the installer are given in this booklet.

During use

This appliance has been designed for cooking edible foodstuffs only, and must not be used for any other purposes.

Always stand back from the oven when opening the oven door during cooking or at the end of it to allow any build up of

steam or heat to release.

zAppliances become very hot with use, and retain their heat for a long period after use. Care should be taken to avoid touching heating elements inside the oven.

zIt is dangerous to alter the specifications or modify the product in any way.

zAppliances become very hot with use, and retain their heat for a long period after use.

zAlways ensure that the control knobs are in the “off” position when not in use.

zFor hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or foodstuffs could result in a fire.

zNever line any part of the oven with aluminium foil.

zEasy clean-liners (if provided) should never be cleaned with any other than soapy water.

zNever use steam or steam machines to clean the appliance.

zBefore any maintenance or cleaning work is carried out on the appliance, always turn off the isolator switch at the cooker point, and allow to cool.

zEnsure that the shelves are put in place in the correct way.

zThis oven (even if it is linked to an electrical cooking table) is made to function at 230 V monophase with neutral.

Child safety

zThis appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

zChildren should be supervised at all times and should not be allowed to touch the hot surfaces or be in the vicinity when in use or until the appliance has cooled after use.

zDuring oven cooking and grilling, the appliance door and the surrounding parts are warmed up to a very high temperature. Be careful and keep children away from the appliance while you are using it. When you connect other appliances to a plug near the oven, check carefully that the wire does not touch warm parts of the oven and does not get taken in the oven door.

79

Technical assistance

zThis appliance should be serviced by an authorized Network Service Centre, and only genuine spare parts should be used.

zUnder no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.

Guide to Use the instructions

Safety Instructions

)Stepoperationby step instructions for an

Hints and Tips

MANUFACTURER:

ELECTROLUX HOME PRODUCTS ITALY S.p.A.

Viale Bologna, 298

47100 FORLÌ (Italy)

80

Zanker ZOB985, ZOB 985 Manual

Description of the appliance

1

B

2

3

4

1.Control Panel

2.Grill

3.Oven lamp

4.Rating plate

81

Control Panel

Cooking

Temperature

Time

function

display

display

 

 

 

 

 

 

B

1 2 3 4 5 6

Push buttons

1.ON / OFF

2.Oven Function Control

3.Fast Heat Up Function

4.Decreasing Control “ “ (Time or Temperature)

5.Increasing Control ““ (Time or Temperature)

6.Minute minder / Cooking duration function / End of cooking function

All the oven functions are controlled by an electronic programmer.

You can select any combination of cooking function, cooking temperature and automatic timing.

NOTE

In the event of a power failure, the programmer will keep all the settings (time of day, program setting or program in operation) for about 3 minutes. If power misses for a longer time, all the settings will be cancelled. When the power is restored, the numbers on the display will flash, and the clock/timer has to be reset.

Special functions

The following functions can be activated by pressing two buttons at the same time:

- Child lock: press button and button “ “;

- Beep on touch: press button and button ““;

- Demo mode: press button B and button ““.

82

"On/Off" Push Button

The oven must be switched on before setting any cooking function or programme. When button is pressed, the oven symbol will come on the display, and the oven light will switch on.

To switch off the oven, you can press button at any time. Any cooking function or programme will stop, the oven light will switch off and the time display will show the time of day only.

It is possible to switch off the oven at any time.

How to select a Cooking Function

1)Switch on the oven by pressing the button.

2)Press button to select the required

oven function. Each time button

is

pressed, a cooking symbol will come on the display and the corresponding cooking function number will come to the left of the currently selected cooking function symbol (Fig. 1).

3) If the pre-set temperature is not suitable, press button “ “ or ““ to adjust the temperature in 5 degree steps.

- as soon as the oven heats up, the

thermometer symbol rises slowly , indicating the degree to which the oven is currently heated;

When the required temperature is reached, an acoustic alarm will sound for a short

time and the thermometer symbol will light permanently.

B

Fig. 1

How to set the temperature and cooking time

Press button “ “ and ““ to increase or decrease the pre-set temperature while the “°” symbol is flashing (Fig. 2). The maximum temperature is 250°C.

Press button “ “ and ““ to increase or decrease the pre-set cooking time while the symbol is flashing (Fig. 2).

B

Fig. 2

83

Here below is a list of the function symbols and their meaning.

Fan cooking - This setting allows

1you to roast or roast and bake simultaneously using any shelf, without flavour transference. Preset temperature: 175°C

2

Conventional cooking - The heat

comes from both the top and bottom

 

element, ensuring even heating

 

inside the oven. Pre-set temperatu-

 

re: 200°C

3

Grill element only - can be used for

grilling small quantities. Pre-set tem-

 

perature:250°C

4

Thermal Grilling - This function

offersanalternativemethodofcooking

 

 

food items, normally associated with

 

conventionalgrilling.Thegrillelement

 

and the oven fan operate together,

 

circulating hot air around the food.

 

Pre-set temperature: 180°C

 

Select a maximum temperature

 

of 200°C.

5

Pizza Oven - The bottom element

provides direct heat to the base of

pizzas, quiches or pies, while the fan ensures air is circulated to cook the pizza toppings or pie fillings.

Pre-set temperature: 175°C

6 Full Grill - The full grill element will be on. Recommended for large quantities. Pre-set temperature: 250°C

Bottom heating element- The heat

7 comes from the bottom of the oven only,toallowyoutofinishyourdishes. Pre-set temperature: 250°C

8

9

Top heating element - The heat comes from the top of the oven only, to allow you to finish your dishes. Preset temperature: 250°C

Defrosting – The oven fan operates without heat and circulates the air, at room temperature, inside the oven. This function is particularly suitable for defrosting delicate food which could be damaged by heat, e.g. cream filled gateaux, iced cakes, pastries, bread and other yeast products.

84

When the oven is first installed

When the oven is first connected to the electrical supply, the display will automatically

show 12:00 and the symbol

will flash.

IEnsure the correct time of day is set before using the oven.

To set the correct time of day :

a) press button and, while the symbol is flashing (Fig. 3), set the correct time of day by pressing buttons “ “ or ““ (Fig. 4).

The time arrow symbol will come off about 5 secondsafterthecorrecttimeisdisplayed(Fig.5). b)ifthesymbol is not flashing anymore, press

button twice.

Then, proceed as described in point a).

press button to switch on the oven.

press button twice and select the "ConventionalCooking"function (Fig. 6).

set the temperature to 250°C using the increasing push button ““.

Allow the oven to run empty for approximately 45 minutes.

open a window for ventilation.

This procedure should be repeated with the "Fan Cooking" and "Full Grill" function for approximately 5-10 minutes.

During this time, an unpleasant odour

may be emitted. This is absolutely normal, and is caused by residues of manufacturing.

Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm soapy water.

Before cooking for the first time, carefully

wash the shelf and the dripping pan.

To open the oven door, always catch the handle in its central part (Fig. 7).

B

Fig. 3

B

Fig. 4

B

Fig. 5

B

Fig. 6

Fig. 7

85

Programming the Oven

How to set the minute minder

1)Press button to select the Minute

Minder function (Fig. 8). The relevant symbol will flash and the control panel will display "0.00".

2)Press button ““ to select the required time. Maximum time is 23 hours 59 minutes. After the setting is carried out, the Minute Minder will wait 3 seconds and then start running (Fig. 9).

3)When the programmed time has elapsed, an acoustic alarm will be heard.

4)To switch off the acoustic alarm, press any button.

The oven will NOT switch off if in use.

The minute Minder function can be used as well when the oven is off.

To use or to change the Minute Minder setting:

B

Fig. 8

B

Fig. 9

press button until the symbols and

will flash.

Now it is possible to change the Minute Minder setting by pressing button “ “ or ““.

To cancel the Minute Minder:

press button until the symbols and

will flash.

Press button “ “ to decrease the time until the display will show "0.00" (Fig. 10).

B

Fig. 10

86

Loading...
+ 18 hidden pages