Yamaha RGX A2 User Manual
ELECTRIC GUITAR
RGX A2
SERVICE MANUAL
EG
011783
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition,
other electrical/electronic and/or plastic (Where applicable) components
may also contain traces of chemicals found by the California Health and
Welfare Agency (and possibly other entities) to cause cancer and/or birth
defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC
COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When
soldering, do not inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the
enclosure of this product, wash your hands before handling food.
■ CONTENTS
OVERALL ASSEMBLY ......................................................................2
ELECTRICAL PARTS ........................................................................4
CIRCUIT BOARD ..............................................................................4
CIRCUIT DIAGRAM ..........................................................................4
WIRING .............................................................................................5
SPECIFICATIONS .............................................................................5
Copyright (c) Yamaha Corporation. All rights reserved. PDF-K88 ’05.06
HAMAMATSU, JAPAN
RGX A2
E09
E10
■ OVERALL ASSEMBLY
E11
Bridge Assembly Installation
E11
D01
E01
E03
E04
E08
E02
E03
E04
A01d
A seal is attached
on the rear of the neck.
RGX A2
E14
F15
Jack Installation
F18
F20
F19
E12
E13
F15
E16 E17
E18
D01
E07
E06
G01 G03 G04
G05 G07 G08
E15
A01
E01 E02
E02
E03
E04
Tuning Machine Assembly
E01
E03
E04
F06 F07
E20
E19
E21
F08
F10
F12
F01
F11
E14
E12
E13
E11
Volume/Pickup Switch Installation
E19
F08
F10
F11
D01
F12
E21
F09
E20
E18
F10
Flat Washer (QC887400)
E16E17
F09
E24 E25
F18
F15
F13
F19
F20
F13
F01
2
Loading...