Yamaha KX-M5 Owner Manual

0 (0)
Yamaha KX-M5 Owner Manual

UCAB

KX-M5

Cassette Deck

Platine Cassette

OWNER’S MANUAL MODE D’EMPLOI

SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT!

Please record the serial number of this unit in the space below.

Model:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

1Read Instructions – All the safety and operating instructions should be read before the unit is operated.

2Retain Instructions – The safety and operating instructions should be retained for future reference.

3Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.

4Follow Instructions – All operating and other instructions should be followed.

5Water and Moisture – The unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

6Carts and Stands – The unit should be used only with a cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn.

7Wall or Ceiling Mounting – The unit

should be mounted to a wall or ceiling only as recommended by the manufacturer.

8Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9Heat – The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.

10Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit.

11Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.

12Cleaning – The unit should be cleaned only as recommended by the manufacturer.

13Nonuse Periods – The power cord of the unit should be unplugged from the outlet when left unused for a long period of time.

14Object and Liquid Entry – Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit.

15Damage Requiring Service – The unit should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the unit; or

C.The unit has been exposed to rain; or

D.The unit does not appear to operate normally or exhibits a marked change in performance; or

E.The unit has been dropped, or the cabinet damaged.

16Servicing – The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.

17Power Lines – An outdoor antenna should be located away from power lines.

18Grounding or Polarization – Precautions should be taken so that the grounding or polarization is not defeated.

2

 

 

 

 

 

 

 

FCC INFORMATION (for US customers only)

 

 

English

 

 

 

 

 

 

requirements. Modifications not expressly approved by

can be determined by turning the unit “OFF” and “ON”,

 

 

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

Compliance with FCC regulations does not guarantee

 

 

 

This product, when installed as indicated in the

that interference will not occur in all installations. If this

 

 

 

product is found to be the source of interference, which

 

 

 

instructions contained in this manual, meets FCC

 

 

 

 

 

 

 

 

Yamaha may void your authority, granted by the FCC,

please try to eliminate the problem by using one of the

 

 

 

following measures:

 

 

 

to use the product.

 

 

 

 

 

 

 

 

2. IMPORTANT: When connecting this product to

Relocate either this product or the device that is being

 

 

 

affected by the interference.

 

 

 

accessories and/or another product use only high

 

 

 

 

 

 

 

 

quality shielded cables. Cable/s supplied with this

Utilize power outlets that are on different branch (circuit

 

 

 

product MUST be used. Follow all installation

breaker or fuse) circuits or install AC line filter/s.

 

 

 

instructions. Failure to follow instructions could void

In the case of radio or TV interference, relocate/reorient

 

 

 

your FCC authorization to use this product in the USA.

 

 

 

the antenna. If the antenna lead-in is 300 ohm ribbon

 

 

 

3. NOTE: This product has been tested and found to

 

 

 

lead, change the lead-in to coaxial type cable.

 

 

 

comply with the requirements listed in FCC

If these corrective measures do not produce satisfactory

 

 

 

Regulations, Part 15 for Class “B” digital devices.

 

 

 

results, please contact the local retailer authorized to

 

 

 

Compliance with these requirements provides a

 

 

 

distribute this type of product. If you can not locate the

 

 

 

reasonable level of assurance that your use of this

 

 

 

appropriate retailer, please contact Yamaha Electronics

 

 

 

product in a residential environment will not result in

 

 

 

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

 

 

 

harmful interference with other electronic devices.

 

 

 

90620.

 

 

 

 

This equipment generates/uses radio frequencies and,

 

 

 

 

The above statements apply ONLY to those products

 

 

 

if not installed and used according to the instructions

 

 

 

distributed by Yamaha Corporation of America or its

 

 

 

found in the users manual, may cause interference

 

 

 

subsidiaries.

 

 

 

harmful to the operation of other electronic devices.

 

 

 

 

 

 

 

 

 

 

 

 

 

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.

Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

The wire in the mains lead are coloured in accordance with the following code:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.

3

ENGLISH

INTRODUCTION

Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.

FEATURES

• High Quality Hard Permalloy Recording/

When you connect the unit to CRX-M5

Playback Head

• Remote control Capability

• Dolby B Noise Reduction

• Automatic Synchronized Recording

• Recording Mute Function

• Timer Play

• Auto Reverse Play

• Sleep Timer

• Rec Reverse function

• Recording Using Timer

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.

“DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

SUPPLIED ACCESSORIES

• Audio connecting cords

• System cable

CONTENTS

PRECAUTIONS ..................................................

3

IDENTIFICATION OF COMPONENT

 

Front panel ......................................................

4

Rear panel ......................................................

4

GETTING STARTED

 

Connecting the unit to the CRX-M5 ................

5

Using the remote control transmitter

 

of the CRX-M5 ................................................

6

Turning on/off the unit .....................................

6

OPERATIONS

 

Playback ..........................................................

7

Recording ........................................................

8

CD synchronized recording ...........................

10

ADDITIONAL INFORMATION

 

Notes about cassette tapes ..........................

11

Maintenance .................................................

12

Troubleshooting .............................................

12

Specifications ................................................

13

E-2

PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT

CAUTIONS

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

Install your unit in good ventilation, a cool, dry, clean place – away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds, locate the unit away from other electrical appliances, motors, and transformers. To prevent fire or electrical shock, do not expose to rain and water.

Do not operate the unit upside-down. It may overheat, possibly causing damage.

Never open the cabinet. If something drops into the set, contact your dealer.

Do not use force on switches, knobs or cords.

When not planning to use this unit for long periods of time (i.e.., vacation, etc.), disconnect the AC power plug from the wall outlet.

Grounding or polarization – Precautions should be taken so that the grounding or polarization of the unit is not defeated.

Do not clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty.

Do not place another component on top of this unit, as damage or discoloration on the surface of the unit may result.

To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

Do not plug the AC power plug to the wall outlet before you finish all connections.

The voltage to be used must be the same as that specified on this unit. Using this unit with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

Keep this manual in a safe place for future reference.

Never allow metallic items (e. g. screwdrivers, tools, etc,) to come near the record/playback head assembly. Doing so may not only scratch or damage the head’s mirror-smooth finish, but also change the magnetic characteristics of the heads, causing a deterioration in reproduction quality.

Although the record/playback head used in this unit is a high quality head with outstanding reproduction characteristics, it can become dirty through the use of old tapes or from dust accumulation over time.

This can have a serious effect on reproduction quality.

Clean the heads regularly with one of the commonly available head cleaners or with cleaning solutions as explained later in this manual.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

NOTE

Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws.

English

E-3

Loading...
+ 11 hidden pages