products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these
graphics on the enclosure. The explanation of these
graphics appears on this page. Please observe all cautions
indicated on this page and those indicated in the safety
instruction section.
Yamaha electronic
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the product.
The lightning flash with arrowhead
symbol, within the equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical
shock.
Battery Notice:
rechargable battery which (if applicable) is soldered in
place. The average life span of this type of battery is
approximately five years. When replacement becomes
necessary, contact a qualified service representative to
perform the replacement.
Warning:
incinerate this type of battery. Keep all batteries away
from children. Dispose of used batteries promptly and as
regulated by applicable laws. Note: In some areas, the
servicer is required by law to return the defective parts.
However, you do have the option of having the servicer
dispose of these parts for you.
Disposal Notice:
beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and
federal regulations that relate to the disposal of products
that contain lead, batteries, plastics, etc.
NOTICE:
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manufacturer’ s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.
NAME PLATE LOCATION:
cates the location of the name plate. The model number,
serial number, power requirements, etc., are located on
this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided
below and retain this manual as a permanent record of
your purchase.
This product MAY contain a small non-
Do not attempt to recharge, disassemble, or
Should this product become damaged
Service charges incurred due to lack of knowl-
The graphic below indi-
IMPORTANT NOTICE:
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is
properly installed and used in its normal and customary
manner, all foreseeable risks have been eliminated. DO
NOT modify this unit or commission others to do so
unless specifically authorized by Yamaha. Product perfor mance and/or safety standards may be diminished.
Claims filed under the expressed warranty may be denied
if the unit is/has been modified. Implied warranties may
also be affected.
SPECIFICATIONS SUBJECT TO CHANGE:
information contained in this manual is believed to be
correct at the time of printing. Howev er , Y amaha reserv es
the right to change or modify any of the specifications
without notice or obligation to update existing units.
ENVIRONMENTAL ISSUES:
duce products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
All Yamaha electronic products
The
Yamaha strives to pro-
CVP-210
Model
Serial No.
Purchase Date
CVP-208
92-469 1 (bottom)
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even
death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions
include, but are not limited to, the following:
Power supply/Power cord
•
Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
•
Check the electric plug periodically and remove any dirt or dust
which may have accumulated on it.
•
Use only the supplied power cord/plug.
•
Do not place the power cord near heat sources such as heaters
or radiators, and do not excessively bend or otherwise damage
the cord, place heavy objects on it, or place it in a position where
anyone could walk on, trip over, or roll anything over it.
Do not open
•
Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument contains no
user-serviceable parts. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Water warning
•
Do not expose the instrument to rain, use it near water or in
damp or wet conditions, or place containers on it containing liquids which might spill into any openings.
•
Never insert or remove an electric plug with wet hands.
Fire warning
•
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If you notice any abnormality
•
If the power cord or plug becomes frayed or damaged, or if there
is a sudden loss of sound during use of the instrument, or if any
unusual smells or smoke should appear to be caused by it,
immediately turn off the power switch, disconnect the electric
plug from the outlet, and have the instrument inspected by qualified Yamaha service personnel.
CAUTION
Always f ollo w the basic precautions listed below to avoid the possibility of physical injury to you or
others, or damage to the instrument or other pr operty . These precautions inc lude, but are not limited
to, the following:
Power supply/Power cord
•
When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord
can damage it.
•
Remove the electric plug from the outlet when the instrument is
not to be used for extended periods of time, or during electrical
storms.
•
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause
overheating in the outlet.
Assembly
•
Read carefully the attached documentation explaining the
assembly process.
Failure to assemble the instrument in the proper sequence might
result in damage to the instrument or even injury.
(1)B-7
Location
•
Do not expose the instrument to excessive dust or vibrations, or
extreme cold or heat (such as in direct sunlight, near a heater, or
in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
•
Do not use the instrument in the vicinity of a TV, radio, stereo
equipment, mobile phone, or other electric devices. Otherwise,
the instrument, TV, or radio may generate noise.
•
Do not place the instrument in an unstable position where it
might accidentally fall over.
•
Before moving the instrument, remove all connected cables . Also
check that all screws are tight and have not been loosened by
moving the instrument.
•
Do not place the instrument against a wall (allow at least 3 cm/
one-inch from the wall), since this can cause inadequate air circulation, and possibly result in the instrument overheating.
1/2
CVP-210/208
3
Connections
•
Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the
power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their
minimum levels and gradually raise the volume controls while
playing the instrument to set the desired listening level.
Maintenance
•
On the CVP-210, gently remove dust and dirt with a soft cloth.
Do not wipe too hard since small particles of dirt can scratch the
instrument's finish.
•
When cleaning the instrument, use a soft, dry or slightly damp
cloth. Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths.
Using the bench (If included)
•
Do not place the bench in an unstable position where it might
accidentally fall over.
•
Do not play carelessly with or stand on the bench. Using it as a
tool or step-ladder or for any other purpose might result in accident or injury.
•
Only one person should sit on the bench at a time, in order to
prevent the possibility of accident or injury.
•
On the CVP-210 bench, do not attempt to adjust the bench
height while sitting on the bench, since this can cause excessive
force to be imposed on the adjustment mechanism, possibly
resulting in damage to the mechanism or even injury.
•
If the bench screws become loose due to extensive long-term
use, tighten them periodically using the included tool.
Saving data
Handling caution
•
Take care that the key cover does not pinch your fingers, and do
not insert a finger or hand in any gaps on the key cover or instrument.
•
Never insert or drop paper, metallic, or other objects into the
gaps on the key cover, panel or keyboard. If this happens, turn
off the power immediately and unplug the power cord from the
AC outlet. Then have the instrument inspected by qualified
Yamaha service personnel.
•
Do not place vinyl, plastic or rubber objects on the instrument,
since this might discolor the panel or keyboard.
•
On the CVP-210, bumping the surface of the instrument with
metal, porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
•
Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the b uttons, s witches or
connectors.
•
Do not operate the instrument for a long period of time at a high
or uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in the
ears, consult a physician.
Saving and backing up your data
•
Some of the current memory data (see page 43) is lost when y ou
turn off the power to the instrument. Save the data to a floppy
disk/the User Drive (see page 40, 48).
Saved data may be lost due to malfunction or incorrect operation. Save important data to a floppy disk.
When you change settings in a display page and then exit
from that page, System Setup data (listed in the Parameter
Chart of the separate Data List booklet) is automatically
stored. However, this edited data is lost if you turn off the
power without properly exiting from the relevant display.
Backing up the floppy disk
•
To protect against data loss through media damage, we recommend that you save your important data onto two floppy disks.
4
Caution for data operations
Make sure NEVER to turn the CVP-210/208’s power off during any kind of data operation inv olving the USER/FLOPPY DISK drives — such
as saving, deleting, or copying/pasting — until the operation is completely finished. (Make sure to wait until the alert message disappears.)
Turning the power off during the operation results in the loss of the data being saved or pasted to the respective drive.
Keeping the power on during such operations is particularly important in regard to the USER drive. Turning off the power while performing
a save/delete/paste operation with the USER drive may result in loss of ALL data on the USER drive (upon the next power on) — and not
just the data in question. In other words, if you are performing a save/delete/paste operation on only the song data of the USER drive and
you turn off the power before the operation is completed, you risk losing ALL your USER drive data — including all voices, styles, and Registration Memory presets you’ve saved to the USER drive.
This caution also applies to creating a new folder on the USER drive or using the factory reset operation (page 154).
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
(1)B-7
CVP-210/208
2/2
Thank you for purchasing the Yamaha Clavinova!
We recommend that you read this manual carefully
so that you can fully take advantage of the advanced
and convenient functions of the Clavinova.
We also recommend that you keep this manual
in a safe and handy place for future reference.
About this Owner’s Manual and Data List
This manual consists of four main sections: Introduction, Quick Guide, Basic Operation, and Reference.
Also, a separate Data List is provided.
* The models CVP-210/208 will be referred to as the CVP/Clavinova in this Owner’s Manual.
* The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and may appear
somewhat different from those on your instrument.
* The example Operation Guide displays shown in this Manual are taken from the CVP-210, and in English.
* Copying of the commercially available software is strictly prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to
which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software,
styles files, MIDI files, WAVE data and sound recordings. Any unauthorized use of such programs and contents outside of
personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE,
DISTRIBUTE OR USE ILLEGAL COPIES.
Trademarks:
• Apple and Macintosh are trademarks of Apple Computer, Inc.
• IBM-PC/AT is a trademark of International Business Machines Corporation.
• Windows is the registered trademark of Microsoft® Corporation.
• All other trademarks are the property of their respective holders.
Voice List, MIDI Data Format, etc.
Please read this section first.
This section explains how to use the basic functions.
This section explains how to use the basic operations including display-based controls.
This section explains how to make detailed settings for the Clavinova’s various functions.
* The photos of the harpsichord, bandoneon, hackbrett, music box, dulcimer and cimbalom, shown in the displays of the CVP-
210/208, are courtesy of the Gakkigaku Shiryokan (Collection for Organolgy), Kunitachi College of Music.
* The following instruments, shown in the displays of the CVP-210/208, are on display at the Hamamatsu Museum of Musical
pan flute, pungi, rabab. shanai, sitar, steel drum, tambra.
* This product is manufactured under license of U .S . Patents No.5231671, No.5301259, No.5428708, and No.5567901 from IVL
Technologies Ltd.
* The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.
CVP-210/208
5
Accessories
Eject button
■
“50 greats for the Piano” Disk (and Music Book)
■
Recording disk
Use this blank disk to save your performance.
■
Owner’s Manual
This manual contains complete instructions for operating your Clavinova.
■
Data List
This manual contains lists of voices, styles and parameters, etc.
■
Bench
A bench may be included or optional, depending on your locale.
Handling the Floppy Disk Drive (FDD) and
Floppy Disk
Precautions
Be sure to handle floppy disks and treat the disk drive with care. Follow the important precautions below.
Compatible Disk Type
• 3.5" 2DD and 2HD type floppy disks can be used.
Inserting/Ejecting Floppy Disks
To insert a floppy disk into the disk drive:
• Hold the disk so that the label of the disk is facing
upward and the sliding shutter is facing forward,
towards the disk slot. Carefully insert the disk into the
slot, slowly pushing it all the way in until it clicks into
place and the eject button pops out.
To eject a floppy disk:
Before ejecting the disk, be sure to confirm that data
is not being written to the floppy disk.
If data is currently being written to the floppy disk in
the following operations, the messages “Now
executing,” “Now copying,” and “Now formatting”
appears in the display.
•Moving, copying, pasting, saving, or deleting data
(page 46 - 48).
• Naming files and folders (page 45); creating a new
folder (page 48).
• Copying a disk to an another disk (page 153);
formatting the disk (page 153).
6
Drive lamp
When the power is turned on, the drive lamp (at
the bottom left of the drive) lights to indicate the
drive can be used.
CVP-210/208
• Never attempt to remove the disk or turn the power off
when the data is being written to the floppy disk.
Doing so can damage the disk and possibly the disk
drive. Press the eject button slowly as far as it will go;
the disk will automatically pop out. When the disk is
fully ejected, carefully remove it by hand.
• If the eject button is pressed too quickly, or if it is not
pressed in as far as it will go, the disk may not eject
properly. The eject button may become stuck in a halfpressed position with the disk extending from the
drive slot by only a few millimeters. If this happens, do
not attempt to pull out the partially ejected disk, since
using force in this situation can damage the disk drive
mechanism or the floppy disk. To remove a partially
ejected disk, try pressing the eject button once again,
or push the disk back into the slot and then repeat the
eject procedure.
• Be sure to remove the floppy disk from the disk drive
before turning off the power. A floppy disk left in the
drive for extended periods can easily pick up dust and
dirt that can cause data read and write errors.
Cleaning the Disk Drive Read/Write Head
• Clean the read/write head regularly. This instrument
employs a precision magnetic read/write head which,
after an extended period of use, will pick up a layer of
magnetic particles from the disks used that will
eventually cause read and write errors.
•To maintain the disk drive in optimum working order
Yamaha recommends that you use a commerciallyavailable dry-type head cleaning disk to clean the
head about once a month. Ask your Yamaha dealer
about the availability of proper head-cleaning disks.
• Never insert anything but floppy disks into the disk
drive. Other objects may cause damage to the disk
drive or floppy disks.
• Never use a floppy disk with a deformed shutter or
housing.
• Do not attach anything other than the provided labels
to a floppy disk. Also make sure that labels are
attached in the proper location.
To protect your data (Write-protect Tab):
•To prevent accidental erasure of important data, slide
the disk’s write-protect tab to the “protect” position
(tab open).
write-protect tab open
(protect position)
Data backup
•For maximum data security Yamaha recommends that
you keep two copies of important data on separate
floppy disks. This gives you a backup if one disk is lost
or damaged. To make a backup disk use the Disk to
Disk function on page 153.
About the Floppy Disks
To handle floppy disks with care:
• Do not place heavy objects on a disk or bend or apply
pressure to the disk in any way. Always keep floppy
disks in their protective cases when they are not in
use.
• Do not expose the disk to direct sunlight, extremely
high or low temperatures, or excessive humidity, dust
or liquids.
• Do not open the sliding shutter and touch the exposed
surface of the floppy disk inside.
• Do not expose the disk to magnetic fields, such as
those produced by televisions, speakers, motors, etc.,
since magnetic fields can partially or completely erase
data on the disk, rendering it unreadable.
CVP-210/208
7
About the Display Messages
A message (information or confirmation dialog) sometimes appears on the screen to
facilitate operation.
When such messages appear, simply follow the instructions as shown by pressing the
corresponding button.
F
G
H
I
J
For this example, press the
[G] (YES) button to
execute formatting.
You can select the desired
language from the Help display (page 53).
“The Clavinova-Computer Connection”
is a supplementary guidebook that describes, for beginners, what you can
do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is
not written for any specific models). The document is available as a PDF file (in English) at the following Internet
address:
Clean the instrument using a dry, soft cloth or slightly damp, soft cloth (wring well).
CAUTION
Do not use benzine, thinner, detergent, or chemical cloth for cleaning. Do not place vinyl, plastic, or rubber
products on the instrument.
Otherwise, the panel or keys may be discolored or degraded.
CAUTION
Before using the Clavinova, be sure to read “Precautions” on pages 3 - 4.
■
Tuning
Unlike an acoustic piano, the Clavinova does not need to be tuned. It always stays perfectly in tune.
■
Transporting
If you move to another location, you can transport the Clavinova along with other belongings. You can move the unit
as it is (assembled) or you can disassemble the unit down to the condition it was in when you first took it out of the
box. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side.
Do not subject the instrument to excessive vibration or shock.
When transporting the assembled Clavinova, make sure all screws are properly tightened and have not been
loosened by moving the instrument.
CVP-210/208
8
Table of Contents
Introduction ............................ 2
SPECIAL MESSAGE SECTION ................................... 2
Voice Allocation Format .........................................163
CVP-210/208: Keyboard Stand
Assembly ............................. 164
Saving and Recalling Custom
Panel Setups - Registration Memory
Editing Voices - Sound Creator
Recording Your Performances
and Creating Songs - Song Creator
Creating Accompaniment Styles
- Style Creator
Adjust the Volume Balance
and Changing Voices - Mixing Console
Using a Microphone - MIC.
Making Global and Other Important
Settings - Function
Troubleshooting.................. 166
Specifications ...................... 168
Index ................................... 170
Using Your Clavinova with Other Devices
Appendix
CVP-210/208
11
Application Index
Use this index to find reference pages that may be helpful for your particular
application and situation.
Listening
Listening to the internal songs................................................................................................................ page 78
Listening to disk songs .......................................................................“Playing Back Songs on Disk” on page 80
Listening to demo songs.........................................................................................................................page 56
Listening to the demo of the selected voices ..........................................................................................page 58
Listening to songs with the special voices of the Clavinova .................................................................. page 124
Playing
Calling up the piano setting ...................................................................................................................page 59
Using the three performance control pedals...........................................................................................page 62
Playing an accompaniment that matches pitch.............................................................“Transpose ”on page 144
Combining two voices ...................................................... “Layer — Layering Two Different Voices” on page 60
Playing separate voices with the right and left hands
...........................“Left — Setting Separate Voices for the Left and Right Sections of the Keyboard” on page 61
Changing the sound
Enhancing the sound with reverb and other effects .....................................“Applying Voice Effects” on page 61
“Adjusting the Effects” on page 126
Adjusting the Level Balance................................................................................................................. page 124
Combining two voices ...................................................... “Layer — Layering Two Different Voices” on page 60
Playing separate voices with the right and left hands
...........................“Left — Setting Separate Voices for the Left and Right Sections of the Keyboard” on page 61
Playback previously recorded
songs (page 21, 36, 77)
Enjoy a wide variety of preset songs
as well as songs on commercially
available disks.
POWER
ON
OFF
MASTER VOLUME
MINMAX
STYLE
ACMPAUTO FILL IN
OTS LINK
METRONOME
START STOP
FADE IN OUT
BREAKINTROMAIN
VOCAL HARMONYTALKEFFECTVH TYPE SELECT MIC. SETTING
EXTRA TRACKSTRACK 2TRACK 1
MIC.
SIGNAL OVER
SONG
STYLEL
SYNC. STARTNEW SONG
VOCAL HARMONY
Automatic backup singing
(page 131)
This sophisticated function
automatically adds appropriate
vocal harmonies to your singing.
R
START STOP
REWREPEATTOPFFREC
TAP TEMPO
ENDING rit.
TRANSPOSETEMPO
RESETRESET
SYNC.STOPSTART STOP
SYNC.START
GUIDE
DEMO
Explore the Demos
(page 20, 56)
These not only showcase the
stunning voices and styles of
the instrument, they
introduce you to the various
functions and features — and
give you hands-on
experience using the
Clavinova!
MENU
DEMO
FUNCTION
SOUND
CREATOR
DIGITAL
RECORDING
MIXING
CONSOLE
HELP
DIGITAL
STUDIO
PART
A
B
C
D
E
BALANCE
CHANNEL
ON OFF
PART
14
STYLE
Back up your performance
with Auto Accompaniment
(page 28, 63)
Playing a chord with your left
hand automatically plays the auto
accompaniment backing. Select
an accompaniment style — such
as pop, jazz, Latin, etc. — and let
the Clavinova be your backing
band!
CVP-210/208
GUIDE
Learn and practice with the
Guide functions (page 38, 82)
Play back the preset songs or the
appropriate disk software, and let
the display and guide lamps show
you when and where to play the
proper notes. It’s never been easier
or more fun to learn new music!
DIRECT ACCESS
123456
DIGITAL RECORDING
Record your performances
(page 97, 113)
With the powerful and easy-touse song recording features, you
can record your own keyboard
performances, and create your
own complete, fully orchestrated
compositions — which you can
then save to the USER drive or a
floppy disk for future recall.
LCD
The large LCD (together
with the various panel
buttons) provides
comprehensive and easyto-understand control of
the Clavinova’s operations.
MUSIC FINDER
Call up the perfect accompaniment
style (page 33, 73)
If you know what song you want to play,
but you don’t know which style or voice
would be right for it, let the Music Finder
help you. Just select the song title, and
the Clavinova automatically calls up the
most appropriate style and voice.
VOICE
Enjoy a huge variety of
realistic voices (page 25, 58)
The Clavinova features a wealth of
exceptionally authentic and
dynamic voices (more than 800)
— including piano, strings,
woodwinds, and more!
BACKNEXT
F
G
H
I
J
PIANO
Set up the piano —
instantly (page 59)
You can call up all the
optimum piano settings for
the Clavinova with just a
single button press — then
play the extraordinarily
realistic grand piano voice.
VOICE PART
ON OFF
LAYER
LEFT
EXIT
VOICE EFFECT
REVERBDSPVARIATION
VOICE
PIANO & HARPSI.E. PIANOPERCUSSIONGUITARBASSORGAN FLUTESORGAN & ACCORDION
BRASSWOODWINDCHOIR & PADSYNTH.XGUSERSTRINGS
ENTER
DATA
ENTRY
MUSIC FINDER
PIANO
REGISTRATION MEMORY
FREEZEMEMORY
USB terminal
Make music with a computer —
quickly and easily (page 157)
Dive in and take advantage of the
wide world of computer music
software. Connections and setup are
exceptionally easy, and you can play
back your computer recorded parts
with different instrument sounds —
all from a single Clavinova!
AUX PEDAL
USB
THRUOUTIN
ONE TOCTH SETTING
1432
1
MIDI
HARMONY ECHOLEFT HOLDMONO
3475862
Organ Flutes
Craft your own organ voices
(page 96)
This special function not only
gives you a full set of rich and
luscious organ sounds, it also lets
you create your own original
organ voices, just as on a
traditional organ, by increasing
and decreasing the flute footages,
and adding percussive sounds.
L/L+RRL/L+RRRL
VIDEO OUTAUX INAUX OUT
(LEVEL FIXED)
CVP-210/208
15
Setting Up the Clavinova
Key cover
■ To open the key cover:
Lift the cover slightly, then push and slide it open.
■ To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.
CAUTION
Be careful to avoid catching
your fingers when opening or
closing the cover.
CAUTION
Hold the cover with both hands when opening or closing it. Do not
release it until it is fully opened or closed. Be careful to av oid catching
fingers (yours or others, especially children’ s) between the co ver and
the unit.
CAUTION
Do not place objects such as a piece of metal or paper on top of the
key cover. Small objects placed on the key cover may fall inside the
unit when the cover is opened and may be nearly impossible to
remove. This could cause electric shock, short circuit, fire or other
serious damage to the instrument.
■ To lower the music rest:
Pull the music rest toward yourself as far as it will go.
1
Gently lower the music rest backward until it is all
2
the way down.
CAUTION
Do not try to use the music rest in a half-raised position. Also, when
lowering the music rest, let the music rest all the way down before
releasing it.
Sheet Music Braces
These braces are for holding the pages of music books in
place.
■ To open
Music Rest
■ To raise the music rest:
Pull the music rest toward yourself as far as it will go.
1
Lower the music rest until it locks in place.
2
CVP-210/208
16
■ To close
Turning the Power On
and Off
Setting the volume
Use the [MASTER VOLUME] dial to adjust the volume to
an appropriate level.
Connect the power cord
Insert the plugs at the ends of the cord, one into the
1
AC INLET on the Clavinova, and the other into a
standard AC outlet.
In some areas, a plug adapter may be provided to
match the pin configuration of the AC wall outlets in
your area.
MASTER VOLUME
FADE IN / OUT
MIN
MAX
CAUTION
Do not use the Clavinova at a high volume level for a long period of
time, or your hearing may be damaged.
Using headphones
Connect a pair of headphones to one of the [PHONES]
jacks.
Two [PHONES] jacks are provided.
Two sets of standard stereo headphones can be plugged
in. (If you are using only one pair of headphones, you
can plug them into either of these jacks.)
(The shape of plug differs depending on locale.)
Press the [POWER] switch.
2
→ The main display appears in the LCD display. The
drive lamp below the lower right end of the
keyboard also lights.
POWER
ON
OFF
The drive lamp lights.
A
B
C
D
E
BALANCE
CHANNEL
ON OFF
PART
BACK
MIC.
INPUT
MIC. LINE PHONES
VOLUME
LINE IN
MIN MAX
Using the Headphone Hanger
A headphone hanger is included in the CVP-210/208
package so that you can hang the headphones on the
Clavinova. Install the headphone hanger using included
two screws (4 × 10 mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on the hanger.
Otherwise, the Clavinova or the hanger may be damaged.
When you’re ready to turn off the power, press the
[POWER] switch again.
→ Both the display and the drive lamp below the
right end of the keyboard will turn off.
CVP-210/208
17
Panel Controls and Terminals
69 707271
MIC.
INPUT
VOLUME
LINE IN
MIN MAX
POWER
1
ON
OFF
MASTER VOLUME
MINMAX
STYLE
ACMPAUTO FILL IN
OTS LINK
23
MIC. LINE PHONES
METRONOME
START ⁄ STOP
FADE IN ⁄ OUT
VOCAL HARMONYTALKEFFECTVH TYPE SELECT MIC. SETTING
PIANO & HARPSI. E. PIANOPERCUSSIONGUITARBASSORGAN FLUTESORGAN & ACCORDION
BRASSWOODWINDCHOIR & PADSYNTH.XGUSERSTRINGS
MUSIC FINDER
PIANO
64
ONE TOCTH SETTING
1432
62
REGISTRATION MEMORY
1
FREEZEMEMORY
65
The Panel Logos
The logos printed on the Clavinova panel indicate standards/formats it
supports and special features it includes.
“GM System Level 1” is an addition to the MIDI standard which
guarantees that any data conforming to the standard will play
accurately on any GM-compatible tone generator or synthesizer from
any manufacturer.
XG is a new Yamaha MIDI specification which significantly expands
and improves on the “GM System Level 1” standard with greater
voice handling capacity, expressive control, and effect capability
while retaining full compatibility with GM. By using the Clavinova’s
XG voices, it is possible to record XG-compatible song files.
The Yamaha XF format enhances the SMF (Standard MIDI File)
standard with greater functionality and open-ended expandability for
the future. The Clavinova is capable of displaying lyrics when an XF
file containing lyric data is played. (SMF is the most common format
used for MIDI sequence files. The Clavinova is compatible with SMF
Formats 0 and 1, and records “song” data using SMF Format 0.)
Vocal Harmony employs state-of-the-art digital signal processing
technology to automatically add appropriate vocal harmony to a lead
vocal line sung by the user. Vocal Harmony can even change the
character and gender of the lead voice as well as the added voices to
produce a wide range of vocal harmony effects.
The DOC voice allocation format provides data playback
compatibility with a wide range of Yamaha instruments and MIDI
devices.
The Style File Format (SFF) is Yamaha’s original style file format, which
uses a unique conversion system to provide high-quality automatic
accompaniment based on a wide range of chord types. The Clavinova
uses the SFF internally, reads optional SFF style disks, and creates SFF
styles using the Style Creator feature.
USB is an abbreviation for Universal Serial Bus. It is a serial interface
for connecting a computer with peripheral devices. It allows “hot
swapping” (connecting peripheral devices while the power to the
computer is on).
The Clavinova features an extensive variety of Demo
songs, that showcase its rich, authentic voices and its
dynamic rhythms and styles.
What’s more, there’s a special selection of Demo
functions. These take you through a hands-on journey of
all the important features and functions of the instrument
— letting you see firsthand how to effectively use the
Clavinova in your own music.
1 Press the [DEMO] button to
call up the menu for
selecting a Demo song.
MENU
DEMO
HELP
FUNCTION
For this example, VOICE is
selected. Voice Demos
showcase the voices of the
CVP-210/208.
2 Press the [BACK]/[NEXT] button to select the Demo
Reference
on page 56
Demo button
categories.
BACKNEXT
Function Demos demonstrate many of the different
functions on the CVP-210/
208. Style Demos introduce
you to the rhythms and
accompaniment styles of the
CVP-210/208 (page 56).
3
Press any of the [A] to [J] buttons or [8▼] (AUTO) button (FUNCTION page only) to select the Demo songs.
For this example, press the [A] button to playback the GrandPiano(C) demo.
For details about the Demos,
A
B
C
D
E
12345678
F
G
H
I
J
VOICE PART
ON ⁄OFF
LAYER
LEFT
refer to page 56.
Press the [EXIT] button to exit from the demo mode and return to the MAIN display when you’ve finished playing the
demo songs.
When you’re done with the Demos, you can get to know your Clavinova even better with these functions:
• Preset Song (Song Book) playback (page 21)
• Disk Song Playback (page 21)
• Short demo playback of the selected voice (in the Voice Open display; page 26).
20
Quick Guide
Song Playback
Song Playback
Reference
on page 77
Here’s where all of the amazing voices, effects, rhythms, styles and other sophisticated features of
the Clavinova come together — in songs!
As you heard in the Demos, the Clavinova contains many built-in recordings. But there’s more. Call up the Song Open
(PRESET) display. And there’s an even greater wealth of song material you can enjoy with your Clavinova — in
commercially available software.
Make sure that the Lan-
Song related buttons
BALANCE and
CHANNEL buttons
Floppy disk drive
guage setting for the instrument (page 154) is the same
as that of the file name of the
song that you are playing
back.
The following songs are compatible for playback on the CVP-210/208. Refer to pages 77, 162 for more details on the
logos.
Disks bearing this logo contain song data for voices defined in the GM standard.
Disks bearing this logo contain song data using the XG format, an extension of the GM
standard that provides a wider variety of voices and more comprehensive sonic control.
Disks bearing this logo contain song data for voices defined in Yamaha’s DOC format.
Songs containing a large
amount of data may not be
able to be read properly by
the instrument, and as such
you may not be able to
select them. The maximum
capacity is about 200–
300KB, however this may
differ depending on the data
contents of each song.
Playback of Songs
1 If you want to play back a disk song, insert an appropriate disk containing song data into the disk drive.
CAUTION
• Make sure to read the
section “Using the Floppy
Disk Drive (FDD) and
Floppy Disks” on page 6.
Quick Guide
21
Song Playback
2 Press the [A] button to call up the Song Open display.
If the MAIN screen is not displayed, press the [DIRECT ACCESS] button followed by the [EXIT] button.
A
B
C
D
E
PRESETFLOPPY DISK
From the MAIN display (the
display shown when the
power is turned on), you can
select songs, voices, accompaniment styles, etc.
Press the [BACK]/[NEXT] button to select the drive.
3 Press the [A] button to select the preset songs (Song Book) folder.
A
B
C
D
E
22
Quick Guide
4 Press one of the [A] to [J] buttons to select a song file.
5 Press the SONG [START/STOP] button to start playback.
Song Playback
RECTOP START / STOP
•To rewind or fast forward to the pla yback point of the song, press the [REW] or [FF] button.
• With song data software (Standard MIDI format 0) that includes lyrics, you can view the lyr-
NEW SONG
SYNC.START
ics on the display during playback. You can also view the score. See pages 84 and 87 for
details.
6 While the song is playing, try using the Mute function to turn certain instrument channels off or on —
letting you craft dynamic arrangements on the fly!
1) Press the [CHANNEL ON/OFF] button.
2) Press the [1 - 8▲▼] button corresponding to the channel you wish to turn on or off.
CHANNEL
ON / OFF
PART
If the STYLE tab is
selected, press this button
again.
1234567812345678
Quick Guide
23
Song Playback
7 Finally, take the producer’s seat and try your hand at mixing. These Balance controls let you adjust the levels
of the individual parts — the song, the style, your singing, and your playing.
1) Press the [BALANCE] button.
2) Press the [1 - 8▲▼] button corresponding to the part of which the volume you wish to adjust.
BALANCE
12345678
8 Press the SONG [START/STOP] button to stop playback.
RECTOP START / STOP
NEW SONG
SYNC.START
You can call up a full set of
mixing controls by pressing
the [MIXING CONSOLE]
button (page 123).
• The [FADE IN/OUT] button (page 69) can be used
to produce smooth fadeins and fade-outs when
starting and stopping the
song, as well as the
accompaniment.
24
Quick Guide
Playing Voices
Playing Voices
The Clavinova features a stunning variety of over 800 dynamic, rich and realistic voices. Try playing
Reference
on page 58
some of these voices now and hear what they can do for your music. Here, you’ll learn how to
select individual voices, combine two voices in a layer, and split two voices between your left and right hands.
Voice related buttons
Playing a Voice
1 Press the [F] button to call up the menu for selecting the MAIN voice.
If the MAIN screen is not displayed, press the [DIRECT ACCESS] button followed by the [EXIT] button.
The voice you’re selecting
here belongs to the MAIN
F
G
H
I
J
VOICE PART
ON OFF
LAYER
LEFT
part, and is called the MAIN
voice. (See page 60 for more
information.)
2 Select a voice group.
VOICE
PIANO & HARPSI. E. PIANOPERCUSSIONGUITARBASSORGAN FLUTESORGAN & ACCORDION
BRASSWOODWINDCHOIR & PADSYNTH.XGUSERSTRINGS
For this example, STRINGS
is selected.
You’ll want to hear the MAIN
voice all by itself — so make sure
that the LAYER and LEFT parts
are turned off.
Press the [BACK]/[NEXT]
button to select the memory
location of the voice. For this
example, PRESET is
selected.
Quick Guide
25
Playing Voices
3 Select a voice.
For this example,
”Orchestra” is
selected.
4 Play the voices.
Naturally, you can play the voice yourself from the keyboard, but you can also
have the Clavinova demonstrate the voice for you. Simply press the [8▲] button
from the display above, and a Demo of the voice plays automatically.
A
B
C
D
E
Press the corresponding buttons to select the
other pages — and discover even more voices.
You can instantly jump back
to the Main display by “double-clicking” on one of the [A]
- [J] buttons.
Press the [8▲] button to start the
Demo for the selected voice. To stop
the Demo, press this button again.
There’s more to the Demo features
than just voices, though–for more
information, see page 56.
Playing Two Voices Simultaneously
1 Press the VOICE PART ON/OFF [LAYER] button to
turn the LAYER part on.
2 Press the [G] button to select the LAYER part.
3 Select a voice group.
Here, we’ll select a lush pad to fill out the sound. Call up the “CHOIR & PAD” group.
VOICE
PIANO & HARPSI. E. PIANOPERCUSSIONGUITARBASSORGAN FLUTESORGAN & ACCORDION
BRASSWOODWINDCHOIR & PADSYNTH.XGUSERSTRINGS
4 Select a voice.
For example, select “Hah Choir.”
5 Play the voices.
Now, you can play two different voices together in a
rich sounding layer — the MAIN voice you selected in
the previous section, plus the new LAYER voice you’ve
selected here.
G
H
VOICE PART
ON OFF
LAYER
LEFT
26
And that’s just the beginning. Check out these other voice-related features:
• Instant setup of the Clavinova for piano play — with the press of a single button (page 59).
• Create your own original voices — quickly and easily — by changing the settings of existing voices (page 91).
• Set up your favorite panel settings — including voices, styles, and more — and call them up whenever you need
them (page 88).
Quick Guide
Playing Different Voices with the Left and Right Hands
VOICE PART
ON OFF
H
G
LAYER
LEFT
1 Press the VOICE PART ON/OFF [LEFT] button to turn the
LEFT part on.
2 Press the [H] button to select the LEFT part.
3 Select a voice group.
Here, we’ll select the “STRINGS” group — so that you can play rich, orchestral chords with your left hand.
VOICE
PIANO & HARPSI. E. PIANOPERCUSSIONGUITARBASSORGAN FLUTESORGAN & ACCORDION
BRASSWOODWINDCHOIR & PADSYNTH.XGUSERSTRINGS
4 Select a voice, then press the [EXIT] button to return to the MAIN display.
For example, select “Symphon. Str.”
Playing Voices
5 Press the [I] button to call up the SPLIT POINT display. From here, you can set the particular key on the
keyboard that separates the two voices — called the Split Point. To do this, simultaneously hold down the [F]
or [G] button and press the desired key on the keyboard. (For more information, see page 141.)
F
G
H
I
J
F
G
H
I
J
6 Play the voices.
The notes you play with your left hand sound one voice, while the notes you play with your right sound a
different voice (or voices).
Split Point
LEFT
MAIN/LAYER
MAIN and LAYER voices are meant to be played with the right hand. The LEFT voice is played with the left
hand.
7 Press the [EXIT] button to return to the MAIN display.
EXIT
Quick Guide
27
Loading...
+ 63 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.