Xantrex Technology MS3000 User Manual

MS2000 and MS3000 Sine Wave Inverter/Charger

Powerful, easy-to-use sine wave inverter/chargers featuring an upgradeable design and built-in networking

MS Series Inverter/Chargers are simply the most advanced and easy to use inverters on the market today. Premium true sine wave output and a high surge capacity, powers onboard appliances and electronic devices including:

Galley appliances Home theatre components Microwaves Power tools Cell phones and PDA chargers

A power factor corrected three-stage charger provides long battery life by recharging batteries quickly, while using less AC power. The rugged UL458 Marine design delivers reliable power in demanding marine conditions. An aluminum chassis, conformal-coated components, and high-temperature operation guarantee long-term, trouble-free performance. MS Series Inverter/Chargers meet strict electromagnetic standards, designed to minimize interference with radios and other onboard electronics.

MS Series Inverter/Chargers are Xanbus™ enabled, so it’s easy to connect network-enabled accessories and share power status and diagnostic information with other devices. Xanbus™ makes power management less complex, while intelligently optimizing available power resources. MS Series Inverter/Chargers have built-in flash memory so their software can be upgraded to take advantage of new features and system enhancements.

Product Features

2000 or 3000-watt inverter with 250% surge for five seconds

True sine wave output to power the latest appliances and electronics

0.95 power factor corrected multi-stage charger for fast, efficient charging Full power output to 122ºF (50ºC) Power sharing reduces charging current to prevent tripping of AC input breaker Built-in transfer switch automatically transfers between inverter power and incoming AC power Meets UL458 marine standards and FCC Class B regulations Xanbus™ enabled with NMEA 2000 and SmartCraft compatibility Drip shield for UL marine compliance

Protection Features

Battery over-voltage and under-voltage protection Over-temperature protection Automatic overload protection Short-circuit protection

Xantrex Technology Inc.

Headquarters 8999 Nelson Way Burnaby, British Columbia Canada V5A 4B5 800 670 0707 Toll Free 604 420 1591 Fax

541 Roske Drive, Suite A Elkhart, Indiana USA 46516 800 446 6180 Toll Free 574 294 5989 Fax

www.xantrex.com

Printed in Canada

2000 and 3000-Watt Sine Wave Inverter/Charger

Electrical Speciﬁcations – Inverter

Model MS2000 MS3000

Output power (continuous) 2000 W 3000 W

Surge rating (5 second) 5000 W (42 A) 7500 W (60 A)

Output voltage 120 Vac 120 Vac

Output frequency 60 Hz + / -0.05% (crystal controlled) 60 Hz + / -0.05% (crystal controlled)

Output waveform Sine wave < 3% THD Sine wave < 3% THD

Efficiency (full load) > 87% > 85 %

Peak efficiency > 92% > 90 %

No-load power draw (search mode) < 14.4 W < 20 W

AC transfer switch 30 A Two legs at 50 A (split phase in), Two legs at 30 A (dual in)

Electrical Speciﬁcations – Charger

Output current 100 Adc 150 Adc

Battery voltage (nominal) 12 Vdc 12 Vdc

Battery voltage range 10.0 – 15.5 Vdc 10.0 – 15.5 Vdc

Charge control 3-stage with manual equalize 3-stage with manual equalize

Charge temperature compensation Remote battery sensor (included) Remote battery sensor (included)

Efficiency 85% typical 85% typical

AC input power factor 0.95 0.95

Input current (for 100 A charging) 15 Arms nominal 22 Arms (150 A)

AC input voltage 120 Vac nominal 120 Vac nominal

AC input voltage range 90 – 135 Vac 90 – 135 Vac

Compatible battery types Wet / Gel / AGM Wet / Gel / AGM

Echo-charge output current 10 A Not applicable

General Specifications

Operating temperature range -4ºF to 122ºF (-20ºC to 50ºC) -4ºF to 122ºF (-20ºC to 50ºC)

Storage temperature range -40ºF to 122ºF (-40ºC to 50ºC) -40ºF to 122ºF (-40ºC to 50ºC)

Dimensions (H x W x D) 8.17 x 13.25 x 16” (208 x 336 x 406 mm) 8.17 x 13.25 x 16” (208 x 336 x 406 mm)

Weight 68.0 lb (30.9 kg) 70.0 lb (31.8 kg)

Warranty Two years Two years

Part Number 809-2010 809-3010

Accessories

System Control Panel 809-0910

Generator Start 809-0915

Network Cable 3’ 809-0935

Network Cable 25’ 809-0940

Network Cable 50’ 809-0941

Network Cable 75’ 809-0942

Regulatory Approvals

CSA/NRTL certified to CSA 107.1, UL 458 (Marine supplement)

ABYC designed to Marine Standards

FCC Class B/Industry Canada Class

Note: Specifications subject to change without notice.

Printed in Canada