Westinghouse 6680000, 6680300, 6688100, 6689800, 6694500 Instruction Manual

Owner’s Manual

Outdoor Lighting Fixture

Installation Instructions

W-003 081504

Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:

ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHT FIXTURE

Congratulations on yourWestinghouse purchase. This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: [e-mail].

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).

WARRANTY INFORMATION

This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a period of Five Years from purchase date. This warranty is in lieu of all other

warranties expressed or implied.

This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.

This warranty does not cover broken glass. If fixture is received with broken glass, please call Westinghouse Lighting for free replacement.

This warranty does not cover costs of removing and re-installing the light fixture.

If this fixture fails for any reason covered by this warranty, simply return the fixture with a copy of the original sales receipt, freight prepaid and Westinghouse Lighting, at its option, shall repair or replace the fixture or refund the purchase price.

WARNINGS

ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install fixture. Return to place of purchase.

For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult a qualified electrician before installing.

NOTE: For fixture employing a grounded convenience outlet.

CAUTION: “This fixture employs a grounded type receptacle and is not intended for connection to a two wire ungrounded source of supply.”

2

FIGURE 1.

CANOPY (M)

HOLDER (J)	THUMB
	SCREW (N)

	*OUTLET	WIRE
		CONNECTORS (G)
	BOX (E)

SIDE

HOLE (I)

LOCK

WASHER (C)

HEX

NUT (D)

NIPPLE (A)

GROUND

WIRE GREEN

GROUNDING

SCREW (H)

MOUNTING

BAR (B) *OUTLET BOX

SCREWS (F)

CAP NUT (K)

DIFFUSER (L)

	Line art shown may not exactly match the fixture enclosed.
		*NOT SUPPLIED
	However, the installation instructions do apply to this fixture.

3

MOUNTING AND WIRING INSTRUCTIONS

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Thread nipple (A) into center hole on mounting bar (B) approximately 1/4 inch (see fig. 1).

3.Thread hex nut (D) onto nipple (A) approximately 1/4 inch and insert lockwasher (C), then thread nipple (A) onto mounting bar (B) and secure with hex nut (D).

4.Secure mounting bar (B) to outlet box (E) (horizontally or vertically, see fig. 1) with outlet box screws (F) (not included).

5.Identify color coding of fixture wires (see figure 2 on page 11).

6.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

7. Fit wire connector (G from fig. 1) over wires and twist until there is a firm connection. If wire connector easily comes off, reattach wire connector and check again for a firm connection (see figure 1).

8.Repeat steps 6 and 7with the white (group B from fig. 2) fixture and outlet box wires.

9.Partially thread green grounding screw (H) into side hole (I) on mounting bar (B) (see fig.1.)

10.Wrap ground wire from fixture around green grounding screw (H), leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (G) (if applicable).

11.Tighten green grounding screw (H). Do not over tighten.

12.Tuckwires inside outlet box (E).

FIXTURE ASSEMBLY INSTRUCTIONS

1.Place canopy (M) over nipple (A).

2.Secure into place with cap nut (K).

3.Install lamp(s). Do not exceed recommended wattage.

4.Place diffuser (L) in holder (J) with lip of diffuser over the tab inside of holder (J).

5.Secure into place with thumb screw (N) (or if holder is threaded, screw holder into place). Do not over tighten.

6.Turn power back on at circuit box.

4