VTech CS6124-31, CS6124, CS6124-11, CS6124-21 User Manual

Online user’s manual

Models: CS6124/CS6124-11/

CS6124-2/CS6124-21/ CS6124-31

w w w.v t e c h c a n a d a . c o m

Congratulations

Compatible with

Hearing Aid T-Coil

TIA-1083

on purchasing your new VTech product. Before using this telephone, please read Important safety instructions on page 40 of this manual.

This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechcanada.com.

The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efciency guidelines.

Telephones identied with this logo have reduced noise and interference

when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.

Table of contents

Getting started . . . . . . . . . . . . . . 1

Parts checklist . . . . . . . . . . . . . . . 1

Telephone base and charger

installation . . . . . . . . . . . . . . . . . 2

Wall mounting (optional). . . . . . . . 2

Battery installation . . . . . . . . . . . . 3

Battery charging . . . . . . . . . . . . . . 3

Handset layout . . . . . . . . . . . . . . . 4

Telephone base layout . . . . . . . . . 6

Telephone settings. . . . . . . . . . . 7

Using the menu . . . . . . . . . . . . . . 7

Ringer volume (telephone base) . 7

Ringer volume (handset) . . . . . . . 7

Ringer tone. . . . . . . . . . . . . . . . . . 7

LCD language. . . . . . . . . . . . . . . . 8

Clear voicemail. . . . . . . . . . . . . . . 8

Key tone . . . . . . . . . . . . . . . . . . . . 9

Set date and time . . . . . . . . . . . . . 9

Home area code. . . . . . . . . . . . . 10

Dial mode . . . . . . . . . . . . . . . . . . 10

Website. . . . . . . . . . . . . . . . . . . . 10

Telephone operation . . . . . . . . 11

Make a call . . . . . . . . . . . . . . . . . 11

Predial a call. . . . . . . . . . . . . . . . 11

Answer a call . . . . . . . . . . . . . . . 11

End a call . . . . . . . . . . . . . . . . . . 11

Volume . . . . . . . . . . . . . . . . . . . . 11

Mute . . . . . . . . . . . . . . . . . . . . . . 11

Call waiting . . . . . . . . . . . . . . . . . 11

Temporary ringer silencing. . . . . 12

Temporary tone dialing. . . . . . . . 12

Find handset. . . . . . . . . . . . . . . . 12

Multiple handset use . . . . . . . . . 13

Chain dialing. . . . . . . . . . . . . . . . 13

Redial list . . . . . . . . . . . . . . . . . . 14

Review and dial from the

redial list . . . . . . . . . . . . . . . . . 14

Delete a redial entry . . . . . . . . . . 14

Directory . . . . . . . . . . . . . . . . . . . 14

Add a directory entry . . . . . . . . . 15

Review and dial from

the directory . . . . . . . . . . . . . . 16

Alphabetical search . . . . . . . . . . 16

Edit a directory entry. . . . . . . . . . 17

Delete a directory entry . . . . . . . 17

About caller ID . . . . . . . . . . . . . . 18

Call log . . . . . . . . . . . . . . . . . . . . 18

Missed call indicator . . . . . . . . . . 19

Memory match . . . . . . . . . . . . . . 19

Review and dial from the

call log. . . . . . . . . . . . . . . . . . . 19

View dialing options . . . . . . . . . . 20

Save a call log entry to

the directory . . . . . . . . . . . . . . 20

Delete the call log entries . . . . . . 21

Call log display screen

messages . . . . . . . . . . . . . . . . 21

Answering system settings. . . 22

Answering system setup. . . . . . . 22

Answer ON/OFF. . . . . . . . . . . . . 22

Call screening. . . . . . . . . . . . . . . 22

Number of rings . . . . . . . . . . . . . 23

Remote access code . . . . . . . . . 23

Message alert tone. . . . . . . . . . . 23

Recording time . . . . . . . . . . . . . . 24

Voice language. . . . . . . . . . . . . . 24

Announcement . . . . . . . . . . . . . . 25

Record your own

announcement . . . . . . . . . . . . 25

Play or delete your own

announcement . . . . . . . . . . . . 25

Answering system operation . . 26

Answering system and

voicemail . . . . . . . . . . . . . . . . . 26

Message capacity. . . . . . . . . . . . 26

New message indication. . . . . . . 27

Call intercept. . . . . . . . . . . . . . . . 27

Message playback . . . . . . . . . . . 27

Delete all messages . . . . . . . . . . 28

Record, play or delete memos . . 28

Message window displays . . . . . 29

Remote access. . . . . . . . . . . . . . 30

Table of contents

Appendix . . . . . . . . . . . . . . . . . . 31

Display screen messages. . . . . . 31

Handset and telephone base

indicators. . . . . . . . . . . . . . . . . 32

Handset screen icons. . . . . . . . . 32

Battery . . . . . . . . . . . . . . . . . . . . 33

Troubleshooting . . . . . . . . . . . . . 34

Important safety instructions. . . . 40

Precautions for users of implanted

cardiac pacemakers . . . . . . . . 41

Operating range . . . . . . . . . . . . . 41

Maintenance. . . . . . . . . . . . . . . . 41

About cordless telephones . . . . . 42

The RBRC® seal . . . . . . . . . . . . . 42

Limited warranty . . . . . . . . . . . . . 43

FCC, ACTA and IC regulations . 45

Technical specications . . . . . . . 46

Index . . . . . . . . . . . . . . . . . . . . . 47

iii

Getting started

Parts checklist

Your telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Battery compartment cover

(1 for CS6124/CS6124-11) (2 for CS6124-2 /CS6124-21) (3 for CS6124-31)

Handset

(1 for CS6124/CS6124-11) (2 for CS6124-2 /CS6124-21) (3 for CS6124-31)

User’s manual

Battery

(1 f or C S6124 /CS6124-11) (2 for C S6124 -2/ CS612 4-21) (3 f or C S6124 -31)

Telephone base

Quick start guide

Quick start gui de

Telephone line cord

Telephone base power adapter

Charger and c har ger adapte r

(1 f or C S6124 -2/CS6124 -21) (2 for C S6124 -31)

To purchase a replacement battery or power adapter, visit our website at www.vtechcanada.com or call 1 (800) 267-7377.

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below. If you subscribe to digital subscriber line (DSL) high-speed Internet service

through your telephone line, you must install a DSL lter between the telephone line cord and telephone wall jack. Contact your DSL service provider for more

information about DSL lter.

Telephone wall jack

A DSL lter (not

included) is required if you have DSL high-speed Internet service

Telephone line cord

Use only the power adapters supplied with this product.

•

The power adapters are intended to be correctly oriented in a vertical or oor

• mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Electrical outlet (not controlled by a wall switch)

Telephone base power adapter

Telephone base

Wall mounting (optional)

Your telephone comes ready for tabletop use. To mount your telephone on the wall:

Position the top hole at the back

1. of the telephone base against the top mounting stud [A].

Slide the telephone base down

2. on the mounting studs [A] and [B] until it locks into place.

[A]

Charger adapter

Charger

Mounting studs

[B]

Telephone base

Getting started

Battery installation

Install the battery as shown below.

Plug the battery connector

securely into the socket.

Place the battery with the wires

inside the battery compartment.

Slide the battery compartment

cover towards the center of the

Place the handset in the telephone

base or charger to charge.

handset until it clicks into place.

CHARGE light remains on when charging.

If the handset will not be used for a long period of time, disconnect and remove the battery to prevent any possible leakage.

Battery charging

Once you have installed the battery, the screen indicates the battery status. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging.

Battery indicators Battery status Action

The screen is blank, or displays Place in charger and ashes.

The screen displays Low battery and ashes.

The screen displays

HANDSET X and

-:-- --/--.

If you are on a call in low battery mode, the handset beeps every 50 seconds.

• If you place the handset in the telephone base without plugging in the battery,

• the screen displays No battery.

Battery has very little or no charge. The handset cannot be used.

Battery has enough charge to be used for a short time.

Battery is charged. To keep the battery charged,

Charge without interruption (at least 30 minutes).

Charge without interruption (about 30 minutes).

place it in the telephone base or charger when not in use.

Getting started

CANCEL

Handset layout

CHARGE light

On when the handset is charging in the telephone base or charger (page 3).

CID/VOL- (caller ID/volume)

Press to review the call log when the telephone is not in use (page 19).

During a call, press to decrease the listening volume. A double beep sounds at the lowest setting (page 11).

Press to scroll down while in a menu, or reviewing the directory, call log or redial list.

When entering numbers or names in the directory, press to move the cursor to the left.

/FLASH

Press to make or answer a call (page 11). During a call, press to answer an incoming call when

you receive a call waiting alert (page 11).

Press repeatedly to add or remove 1 in front of the call log entry before dialing or saving it to the directory (page 20).

Dialing keys

Press to enter numbers or characters.

TONE

While on a call, press to switch to tone dialing temporarily when using the pulse service (page 12).

MUTE/DELETE

While on a call, press to mute the microphone (page 11). While using the dialing keys, press to delete digits and

characters. While the handset is ringing, press to silence the ringer

temporarily (page 12). When reviewing the directory, call log or redial list, press to delete the

displayed entry (page 17, 21 or 14).

Getting started

CANCEL

Handset layout

MENU/SELECT

Press to show the menu. While in a menu, press to choose an item, or save an

entry or setting.

/VOL+ (directory/volume)

Press to review the directory when the telephone is not in use (page 16).

During a call, press to increase the listening volume. A double beep sounds at the highest setting (page 11).

Press to scroll up while in a menu, or reviewing the directory, call log or redial list.

When entering numbers or names in the directory, press to move the cursor to the right.

OFF/CANCEL

During a call, press to hang up. While the handset is ringing, press to silence the ringer

temporarily (page 12). While the telephone is not in use, press and hold to

erase the missed call indicator (page 19). While in a menu, press to return to the previous menu.

While in a menu, press and hold to return to idle mode. While predialing, press to delete digits (page 11).

Press repeatedly to show other dialing options when reviewing a call log entry (page 20).

REDIAL/PAUSE

Press repeatedly to review the redial list (page 14). While dialing or entering numbers into the directory,

press and hold to insert a dialing pause (pages 11 and 15).

Getting started

Telephone base layout

X/DELETE

Press to delete the message currently playing (page 27).

When the telephone is not in use, press twice to delete all previously reviewed messages (page 28).

/REPEAT

Press to repeat the message or press twice to play the previous message (page 27).

/FIND HANDSET

Press once and then release to page all system handsets (page 12).

IN USE light Flashes when there is an

incoming call, or another telephone sharing the same line is in use.

On when the telephone is in use, or the answering system is answering a call.

Message window

Shows the number of messages and other answering system information (page 29).

/SKIP

Press to skip to the next message (page 27).

/PLAY/STOP

Press to play messages (page 27).

Press to stop message playback (page 27).

/ANS ON/OFF

Press to turn the answering system on or off (page 22).

/ /VOLUME

Press to adjust the volume during playback (page 27).

When the phone is not in use, press to adjust the telephone base ringer volume (page 7).

Telephone settings

Using the menu

To enter the handset menu:

Press MENU/SELECT when the telephone is not in use.

Press CID or until the screen displays the desired feature menu.

Press MENU/SELECT to enter that menu.

To return to the previous menu, press OFF/CANCEL.

•

To return to idle mode, press and hold OFF/CANCEL.

•

Ringer volume (telephone base)

Press /VOLUME or /VOLUME on the telephone base to adjust the ringer volume when the telephone is not in use. When you set the ringer volume to zero, the base ringer is off and the system announces, “

Ringer volume (handset)

You can adjust the ringer volume or turn the ringer off.

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Ringers,

then pressress MENU/SELECT twice. The screen displays Volume: with the current setting

ashing. Press CID or to choose Off, Low or High. A sample of each ringer volume plays as you scroll through the choices.

Press MENU/SELECT to save your selection. You hear a

conrmation tone.

If the ringer volume is set to Off, Ringer off is displayed on the idle screen.

• When the ringer volume is set to Off, the handset still rings when you press

•

/FIND HANDSET.

Base ringer is off.”

Ringers

Volume:High

Ringer tone

You can change the handset ringer tone.

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Ringers,

then press MENU/SELECT. Press CID or until the screen displays

Ringer tone, then press MENU/SELECT.

The screen displays Tone: with the current setting

ashing. PressPress CID or to choose 1, 2, 3, or 4. A sample of each ringer tone plays as you scroll through the choices.

Press MENU/SELECT to save your selection. You hear a

conrmation tone.

If you turn off the ringer volume, you will not hear ringer

• tone samples.

Ringers

Ringer tone

Tone: 1

Telephone settings

LCD language

The LCD language is preset to English. You can select English, French or Spanish to be used in all screen displays.

To select a language:

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Settings,

then press MENU/SELECT twice. Press CID or to choose English, Français or

Español, then press MENU/SELECT to save your setting.

You hear a conrmation tone.

Clear voicemail

If you subscribe to voicemail service offered by your telephone service provider, New voicemail and are displayed on the handset when you have new voicemail messages. Contact your telephone service provider for more information about using your voicemail service.

After you have listened to all new voicemail messages, the indicators on the handset turn off automatically.

Use the clear voicemail feature when the telephone indicates that there is new voicemail but there are none (for example, when you have accessed your voicemail while away from home). The clear voicemail feature only turns off the indicators; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal that turns on the indicators.

To manually turn off these indicators:

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Settings,

then press MENU/SELECT. Press CID or until the screen displays

Clr voicemail, then press MENU/SELECT. The screen

displays Clear VM icon? Press MENU/SELECT to conrm your selection. You hear

a conrmation tone.

Your telephone service provider may alert you of new messages with a stutter (broken) dial tone. Contact your telephone service provider for details.

Settings

LCD language

Settings

Clr voicemail

Clear VM icon?

Telephone settings

Key tone

You can turn the key tone on or off.

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Settings,

then press MENU/SELECT. Press CID or until the screen displays Key tone,

then press MENU/SELECT. Press CID or to choose On or Off, then press

MENU/SELECT to conrm your selection. You hear a

conrmation tone.

Set date and time

The answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information.

To change the setting:

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Settings,

then press MENU/SELECT. Press CID or until the screen displays

Set date/time, then press MENU/SELECT.

When the month is ashing, press CID or until

4. the screen displays the correct month and then press

MENU/SELECT; or, press the dialing keys (0-9) to enter

the current month (for example, if the month is March, you must enter 03).

Repeat step 4 to set the correct date and year and then

5. press MENU/SELECT to advance to time setting.

When the hour is ashing, press CID or until the

6. screen displays the correct hour and then press

MENU/SELECT; or, press the dialing keys (0-9) to enter

the current hour (for example, if the time is two o’clock, you must enter 02).

Repeat step 6 to set the correct minute. When AM or PM

is ashing, press CID or to select AM or PM. Press

MENU/SELECT to save your settings. You hear a conrmation tone.

If the date and time are not set when a message is recorded, the system

• announces, “Time and date not set,” before each message plays.

When there is a power failure or after battery replacement, the date and time

• need to be reset.

Settings

Key tone

Settings

Set date/time

Date: 03/25/10

Time: 02:35 PM

Telephone settings

Home area code

If you dial local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored in the call log without the area code.

To change the setting:

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Settings,

then press MENU/SELECT. Press CID or until the screen displays

Home area code, then press MENU/SELECT. The

screen displays the current stored home area code. Use the dialing keys (0-9) to enter the desired home

4. area code.

Press MUTE/DELETE to delete a digit.

•

Press and hold MUTE/DELETE to delete all digits.

• Press MENU/SELECT to conrm. You hear a conrmation tone.

If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed following the steps above. After you have deleted the home area code, _ _ _ appears.

Dial mode

The default dial mode is tone dialing. If you have pulse (rotary) service, you need to change the dial mode to pulse dialing.

To change the setting:

Press MENU/SELECT when the handset is not in use.

1. Press CID or until the screen displays Settings, then press

MENU/SELECT.

Press CID or until the screen displays Dial mode, then press

MENU/SELECT.

Press CID or to choose Tone or Pulse, then press MENU/SELECT to

conrm your selection. You hear a conrmation tone.

Home area code

___

Website

Use this feature to view the VTech website address.

Press MENU/SELECT when the handset is not in use.

1. Press CID or until the screen displays Website, then press

MENU/SELECT. The screen displays the VTech website address.

Telephone operation

CANCEL

Make a call

Press /FLASH and then use the dialing keys (0-9) to

• dial the telephone number.

Predial a call

Enter the telephone number using the dialing keys (0-9),

• then press /FLASH to dial.

The screen shows the elapsed time as you talk (in hours, minutes

• and seconds).

When predialing (preview numbers before dialing), press MUTE/DELETE or

•

OFF/CANCEL to backspace and delete; press and hold REDIAL/PAUSE to insert

a dialing pause (a P appears). If the handset is moved out of range while on a call, it will beep three times.

•

Answer a call

Press /FLASH or any of the dialing keys (0-9, TONE or #).

•

End a call

Press OFF/CANCEL or put the handset to the telephone base or charger.

•

Volume

During a call, press CID/VOL- or /VOL+ to adjust

• the listening volume.

Mute

The mute function allows you to hear the other party but the other party cannot hear you.

During a call, press MUTE/DELETE on the handset.

The handset screen displays Muted until the mute function is turned off.

Press MUTE/DELETE again to resume the conversation.

The handset screen temporarily displays Microphone on.

Call waiting

When you subscribe to call waiting service from your telephone service provider, you hear an alert tone if there is an incoming call while you are on another call.

Press /FLASH to put the current call on hold and take the new call.

• Press /FLASH at any time to switch back and forth between calls.

•

Muted

10:15 PM

12/25

Telephone operation

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the handset or telephone base without disconnecting the call. The next call rings normally at the preset volume.

To silence the handset ringer:

Press OFF/CANCEL or MUTE/DELETE and then

•

Ringer muted displays.

To silence the telephone base ringer:

Press /VOLUME once.

•

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services.

During a call, press TONE .

1. Use the dialing keys to enter the number. The telephone sends

2. touch-tone signals.

The telephone automatically returns to pulse dialing mode after you end

3. the call.

Find handset

Use this feature to nd all system handsets.

To start paging:

Press /FIND HANDSET on the telephone base

1. once and then release when the telephone is not in use.

All idle system handsets ring and ** Paging **

ashes on the screen for 60 seconds.

To end paging:

Press /FIND HANDSET on the telephone base

•

once and then release.

-OR-

Press /FLASH or any of the dialing keys (0-9, TONE or #) on the handset to

•

stop the paging tone.

Do not press and hold /FIND HANDSET for more than four seconds. It may lead to handset deregistration. If Not registered displays on the handset, refer to Troubleshooting on page 34 to register the handset to the telephone base.

Ringer muted

10:15 PM

12/25

+ 37 hidden pages