Volvo XC60 2015 Quick Guide

WEB EDITION

QUICK GUIDE

WELCOME TO THE GLOBAL FAMILY OF VOLVO OWNERS!

This Quick Guide provides a brief overview of the most common features and functions in your Volvo.

The Owner’s Manual and the other driver’s information provided contain important warnings and other
information not included in this guide.

The following symbols indicate:

Specific call-outs in a general illustration.

Step-by-step instructions.

Important information that should be read in the Owner’s Manual.

Important information, warnings and safety-related instructions marked by these symbols can be
found on the last page of this guide.

An asterisk (*) indicates optional equipment.

For additional information, contact Customer Service:
U.S.A.: 1-800-458-1552 www.volvocars.com/us
Canada: 1-800-663-8255 www.volvocars.com/ca

01 Starting and driving

Remote key
Keyless drive
Starting and switching off the engine
Parking brake
Wipers

02 Driver support systems

BLIS* and CTA*
Start/Stop*
Pedestrian Detection*

03 Your driving environment

Laminated panoramic roof*
Power tailgate*
Adjusting the seats
Adjusting the steering wheel

04 Functions in your vehicle

Climate controls
Lighting controls
Instrument panel
Infotainment system
Bluetooth hands-free
Instrument panel themes
Engine Remote Start*
External audio devices
Volvo Navigation System*
Menu settings
Setting the clock

05 Tips

Refueling
Vehicle care
Storage compartments
AUX/USB and 12-volt sockets

How does the remote key work?

Unlocks the doors and the tailgate and disarms the

alarm. This setting can be changed in MY CAR.
Locks the doors and the tailgate and arms the alarm.
Approach lighting.
Press once to unlock the tailgate only, press and

hold to open the power tailgate*.
Information about the vehicle (Personal Car Com-

municator (PCC*) only).
“Panic” alarm: Press and hold to sound the alarm.

Turn off the alarm with the unlock button.

The remote key can store the positions of
the power seat* and door mirrors.

01

What do the lights in the remote key (PCC*
only) indicate?

Green light: the vehicle is locked.
Yellow light: the vehicle is unlocked.
Red light: the alarm has been triggered.
Alternatively flashing red lights: the alarm was trig-

gered less than 5 minutes ago.

How does keyless drive* work?

A keyless drive remote key must be in your possession.

Locking and arming the alarm

– Press the pressure-sensitive area on any of the outside

door handles or the rubber-covered button next to the
tailgate opening control.

Unlocking and disarming the alarm

– Pull a door handle to unlock and open the door or

press the tailgate opening control.

01

01

See the additional information on the last page of
this guide.

How do I start the engine?

Holding the end of the remote key with the base of

the key blade, insert the remote key into the ignition

slot and press it in as far as possible.
Press the brake pedal.
Press the START/STOP ENGINE button briefly and

release it to start the engine.

See the additional information on the last page of
this guide.

01

How do I switch off the engine?

Park the vehicle and briefly press the START/STOP

ENGINE button to switch off the engine.

Pull the remote key out of the ignition slot.

How do I set/release the parking brake?

Setting

Press firmly on the brake pedal.
Press the PUSH LOCK/PULL RELEASE control:

the symbol in the instrument panel flashes while the

parking brake is being applied and glows steadily

when it has been fully applied.
Release the brake pedal.

Releasing

Press firmly on the brake pedal.
Pull the PUSH LOCK/PULL RELEASE control.

01

01

How do I start the windshield/tailgate wipers
and rain sensor*?

Press the lever down to start the windshield wipers or up
for the single-sweep function.

Rain sensor On/Off.
Turn to adjust the rain sensor sensitivity or interval

wiper speed.
Tailgate wiper – interval/normal.

01

What do BLIS* and CTA* do?

Blind Spot Information System (BLIS) indicates the
presence of a fast approaching vehicle or a passing
vehicle in the door mirror’s blind area.

Cross Traffic Alert (CTA) detects vehicles crossing
behind your vehicle while you are backing up.

BLIS and CTA are activated when the engine is started
and can be deactivated/reactivated by pressing the but­ton.

BLIS On/Off.
CTA On/Off – controlled by the same button as Park

Assist*.

See the warning on the last page of this guide.

How do I use the Start/Stop function*?

Stopping the engine

Press and hold the brake pedal until the vehicle stops.

Starting the engine

Release the brake pedal.

The indicator light in the button indicates that the function
is active.

02

02