Model CBD
OPERATORS MANUAL
Manual No. 513852 |
Rev.3 |
This manual provides basic information about the machine. Instructions and suggestions are given covering its operation and care.
The illustrations and specifications are not binding in detail. We reserve the right to make changes to the machine without notice, and without incurring any obligation to modify or provide new parts for machines built prior to date of change.
DO NOT ATTEMPT to operate the machine until instructions and safety precautions in this manual are read completely and are thoroughly understood. If problems develop or questions arise in connection with installation, operation, or servicing of the machine, contact Stoelting.
Clearbowl Service Information: 888.429.5920 (U.S. toll free) 920.894.2293 (outsude the U.S.)
|
Stoelting Foodservice Equipment |
Customer Service: 888.429.5920 |
|
502 Highway 67 |
Fax: 800.545.0662 |
|
||
|
Kiel, WI 53042-1600 |
Email: foodservice@stoelting.com |
|
||
|
U.S.A. |
|
stoeltingfoodservice.com
Main Tel: 800.558.5807 |
© 2015 PW Stoelting, LLC |
Fax: 920.894.7029 |
|
|
|
A Few Words About Safety
Safety Information
Read and understand the entire manual before operating or maintaining Stoelting equipment.
This manual provides the operator with information for the safe operation and maintenance of Stoelting equipment. As with any machine, there are hazards associated with their operation. For this reason safety is emphasized throughout the manual. To highlight specific safety information, the following safety definitions are provided to assist the reader.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
If you need to replace a part, use genuine Stoelting parts with the correct part number or an equivalent part. We strongly recommend that you do not use replacement parts of inferior quality.
Safety Alert Symbol:
This symbol Indicates danger, warning or caution. Attention is required in order to avoid serious personal injury. The message that follows the symbol contains important information about safety.
Signal Word:
Signal words are distinctive words used throughout this manual that alert the reader to the existence and relative degree of a hazard.
WARNING
The signal word “WARNING” indicates a potentially hazardous situation, which, if not avoided, may result in death or serious injury and equipment/property damage.
CAUTION
The signal word “CAUTION” indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury and equipment/property damage.
CAUTION
The signal word “CAUTION” not preceded by the safety alert symbol indicates a potentially hazardous situation, which, if not avoided, may result in equipment/property damage.
NOTE (or NOTICE)
The signal word “NOTICE” indicates information or procedures that relate directly or indirectly to the safety of personnel or equipment/property.
|
TABLE OF |
|
|
CONTENTS |
|
Section |
Description |
Page |
1 |
Description and Specifications |
|
1.1 |
Description.................................................................................................. |
1 |
1.2 |
Specifications ............................................................................................. |
2 |
2 |
Installation Instructions |
|
2.1 |
Safety Precautions ..................................................................................... |
3 |
2.2 |
Shipment and Transit.................................................................................. |
3 |
2.3 |
Machine Installation.................................................................................... |
3 |
2.4 |
Defrost Timer .............................................................................................. |
3 |
3 |
Initial Set-Up and Operation |
|
3.1 |
Operator’s Safety Precautions.................................................................... |
7 |
3.2 |
Operating Controls and Indicators.............................................................. |
7 |
3.3 |
Assembly of Machine ................................................................................. |
8 |
3.4 |
Sanitizing .................................................................................................... |
9 |
3.5 |
Freeze Down and Operation ...................................................................... |
9 |
3.6 |
Removing Mix From Machine..................................................................... |
10 |
3.7 |
Disassembly of Machine Parts ................................................................... |
10 |
3.8 |
Cleaning and Sanitizing the Machine Parts................................................ |
10 |
3.9 |
Routine Cleaning ........................................................................................ |
11 |
3.10 |
Preventative Maintenance .......................................................................... |
11 |
4 |
Troubleshooting |
|
4.1 |
Alarms ........................................................................................................ |
13 |
5 |
Replacement Parts |
|
5.1 |
Decals......................................................................................................... |
15 |
5.2 |
Tank and Cover .......................................................................................... |
15 |
5.3 |
Handle Assembly and Auger Parts ............................................................. |
16 |
SECTION 1
DESCRIPTION AND SPECIFICATIONS
1.1DESCRIPTION
The CBD counter machines are equipped with fully automatic controls to provide a uniform product. They operate with almost any type of frozen beverage mix. This manual is designed to help qualified service personnel and operators with the installation, operation and maintenance of the CBD machines.
This manual applies to all CBD model machines in single and double tank configurations.
Figure 1-1 Model CBD117-37
Figure 1-2 Model CBD127-37
Operators Manual #513852 |
1 |
CBD Model Machines |
1.2SPECIFICATIONS
|
Model CBD117 |
CBD127 |
|
Dimensions |
Machine |
Machine |
|
width |
9-7/8’’ (25,1 cm) |
17-3/8’’ (44,1 cm) |
|
height |
21-7/8’’ (55,6 cm) |
21-7/8’’ (55,6 cm) |
|
depth |
18-3/4’’ (47,6 cm) |
18-3/4’’ (47,6 cm) |
|
Weight |
55 lbs (24,9 kg) |
75 lbs (34,0 kg) |
|
Electrical |
1 Phase, 115 VAC, 60Hz |
1 Phase, 115 VAC, 60Hz |
|
running amps |
5.5A |
12A |
|
connection type |
NEMA5-15P included |
NEMA5-15P included |
|
Compressor |
426 Btu/hr |
608 Btu/hr |
|
Drive Motor |
1/12 hp |
1/12 hp |
|
Cooling |
Air cooled units require 10” (25,4 cm) |
Air cooled units require 10” (25,4 cm) |
|
air space on both sides and back |
air space on both sides and back |
||
|
|||
Capacity |
1.5 gallons |
1.5 gallons per tank |
Operators Manual #513852 |
2 |
CBD Model Machines |