Vitek VT-4P65, VT-8P120, VT-16P200 User Manual

Page 1
VT-8P120
VT-16P200
6~18 Port PoE Switches
VITEK
VITEK
VT-4P65
FEATURES
• Provides 4 - 10/100Base-TX PoE ports & 2 10/100Base­TX Ethernet Uplink Ports (VT-4P65) / Provides 8 ­10/100Base-TX PoE ports & 2 10/100Base-TX Uplink Ports (VT-8P120) / Provides 16 10/100Base-TX ports / 1 Gigabit/STP Fiber Combo / 1 Gigabit RJ-45 (VT-16P200)
• Conforms to IEEE 802.3/u/ab, 802.3af/at
• High back-plane bandwidth 1Gbps (VT-4P65) / 5.6Gbps (VT-8P120) / 7.2Gbps (VT-16P200)
• IEEE802.3x Flow control
• EMI standards complies with FCC, CE class B
Page 2
Product Layout
Application
PoE Ethe rnet
S wit ch
po wer
Monitor
PoE IP Camera
PoE Dome C amera
PoE IP Camera
PoE PTZ Camera
Cat 5
5e
6
Cable
NVR
VT-4P65
Powe r IPC1 IP C2 IPC3 I PC4 IPC 5 IPC6
PoE SW ITCH
INPUT:100-240VAC
VT-8P120
Link Active/
PWR
G1
PoE Switch
POE Ethernet Port
Gigabit Up-link Ethernet Port
G2
DC48V
Power input port
VT-16P200
RJ-45
POE Ethernet Port
Gigabit Combo Port
INPUT 100 240VAC: -
Power input port
: -
INPUT 100 240VAC
FAN
Installation
Package Contents:
PoE Ethernet Switch 1pcs Power adaptor 1pcs Ac power cable 1pcs Accessory 1pcs User manual 1pcs
Installation Steps:
1) Please turn off the PoE Switch & all ethernet devices power before installation to avoid damage,
2) Use network cable to connect IP cameras PoE ports
3) Use a network cable to connect equipment via up link port and NVR or computer
4) Connect power adapter
5) Check if the installation is correct and equipment is in good condition and the connection is stable
6) Ensure the Ethernet equipment with power is working properly.
2
Page 3
Wiring
6 Port Compact Switch with 4 PoE Ports
Preliminary Specifications:
VT-4P65
10 Port Compact Switch with 8 PoE Ports
Preliminary Specifications:
VT-8P120
18 Port Switch with 16 PoE Ports
Preliminary Specifications:
VT-16P200
Tools: Wire Crimper & Network Tester. Wire Sequence of RJ45 plug should conform with EIA/TIA 568A or 568B.
Specifications
VT-4P65 Specifications
Ethernet Speed
Ethernet Transmission Distance
Ethernet Standard
Switching capacity
Transfer Rate
MAC Address
Power Supply
Voltage Range
Power Consumption
Working Temperature
Dimensions (W x H x D)
VT-8P120 Specifications
Ethernet Speed
Ethernet Transmission Distance
Ethernet Standard
Switching capacity
Transfer Rate
MAC Address
Power Supply
Voltage Range
Power Consumption
Working Temperature
Dimensions (W x H x D)
Pin Color
1
White reenG
2
3
White Orange
4
5
White lueB
6
White Brown
7
8
Green
Blue
Orange
Brown
EIA TIA 568A
1
1
2
3
4
5
6
7
8
White Orange
White Green
White Brown
Orange
Blue
White Blue
Green
Brown
1
EIA TIA 568B
Pin Color
8
4x PoE Ports: 10/100Mbps / 2x Uplink Ports:10/100/Mbps
328 feet (100 Metres)
IEEE802.3, IEEE 802.3u, IEEE802.3af, IEEE802. 3at
1G
14,880 pps @ 10Mbps / 148,800 pps @ 100Mbps
1K MAC address table
External Power Adaptor
52 VDC
6W
32º~104ºF (0º~40ºC) / 20~85% RH
6.50” x 4.06” x 1.77” (165 x 103 x 45mm)
8x PoE Ports: 10/100Mbps / 2x Uplink Ports:10/100Mbps
328 feet (100 Metres)
IEEE802.3, IEEE 802.3u, IEEE802.3af, IEEE802. 3at
5.6G
14,880 pps @ 10Mbps / 148,800 pps @ 100Mbps
4K MAC address table
External Power Adaptor
52~ 55 VDC
70W (67W for PoE)
32º~104ºF (0º~40ºC) / 20~85% RH
7.48” x 3.94” x 1.10” (190 x 100 x 28mm)
8
VT-16P200 Specifications
Ethernet Speed
Ethernet Transmission Distance
Ethernet Standard
Switching capacity
Transfer Rate
MAC Address
Power Supply
Voltage Range
Power Consumption
Working Temperature
Dimensions (W x H x D)
16x PoE Ports: 10/100Mbps / G1 (combo) 10/100/1000Mbps & 1.25Gbps / G2 10/100/1000Mbps
328 feet (100 Metres)
IEEE802.3, IEEE 802.3u, IEEE802.3af, IEEE802. 3at
7.2G
14,880 pps @ 10Mbps / 148,800 pps @ 100Mbps / 1,488,000 pps @ 1000Mbps
4K MAC address table
Built-In Power Supply
100~240 VAC
190W for 16 PoE
32º~104ºF (0º~40ºC) / 20~85% RH
11.02” x 7.09” x 1.73” (280 x 180 x 44mm)
3
Page 4
LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller.
The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to products sold or purchased through unauthorized sales channels. Warranty support is available only if product is purchased through a VITEK Authorized Reseller.
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
Version 1.0
January 2018
Loading...