Instructions and
Illustrated Parts List
CATALOG NO.
194-10-GR
First Edition
STYLES 160-20
LEWIS
CLASS 160-20
SINGLE THREAD BLINDSTITCH
SPOT TACKING MACHINE
10/19/06
Manual No. 194-10-GR Adjusting Instruction Illustrated parts for 160-20 Series Machines
First Edition Copyright 2006
By
Union Special Corporation Rights Reserved In All Countries
Printed in U.S.A. October 2006
PREFACE
This parts manual has been prepared to guide you while adjusting the 160-20 Series machines.
This manual explains in detail the proper setting for each of the components related to forming the stitch and completing the functions of the machine. Illustrations are used to show the adjustments and reference letters are used to point out specific items discussed.
Careful attention to the instructions for operating and adjusting these machines will enable you to maintain the superior performance and reliability designed and built into every Union Special machine.
Adjustments are presented in sequence so that a logical progression is accomplished. Some adjustments performed out of sequence may have an adverse effect on the function of the other related parts.
This manual has been comprised on the basis of available information. Changes in design and/or improvements may incorporate a slight modification of configuration in illustrations or part numbers.
On the following pages will be found illustrations and terminology used in describing the adjustments for the 160-20 Series machines.
2
Loading...