6/*%&/ $03%-&44 5&-&1)0/&4
%$9 4FSJFT
Congratulations on your purchase of the Uniden DCX300 accessory handset and charging cradle. You can place this fully featured cordless handset anywhere your home has AC power.
Note: Illustrations in this manual are used for explanation purposes. Some illustrations may differ from the actual unit.
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products can accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314.
Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under the "Accessibility" link. If your call is received outside of our business hours, you can leave us a message and we will call you back.
The DCX300 accessory handset will not operate until it is registered to a Uniden main base. This manual describes how to set up your new handset; for more detailed instructions on operating your new handset, please refer to the manual supplied with your base.
Accessory |
A handset that works with an expandable phone base. |
|
Handset |
Accessory handsets must be registered to a base. |
|
Base |
The main part of the phone that connects to your phone |
|
line, and lets you make and receive calls. |
||
|
||
Charging |
A cradle that charges an accessory handset. It connects to |
|
cradle |
power but not to a phone line. |
|
Standby |
The handset is not in use. No line has been activated. |
|
(It doesn’t matter whether the handset is in the cradle.) |
||
|
No dial tone is present. |
|
Station |
Any registered handset or the base. |
|
Talk |
A dial tone has been enabled, so you can dial and carry on |
|
a conversation with an outside party. |
||
|
Uniden® is a registered trademark of Uniden America Corporation.
This handset is compatible with Uniden's 1.9 GHz DECT6.0 Expandable phone system: the DECT2000 and DECT3000 series.
Please visit our website at www.uniden.com for the most up-to- date list of compatible bases.
Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline. See the back cover page for contact information.
• Cordless Handset • Belt Clip
•Printed Material
•Charging cradle with AC Adapter (model # PS-0007: Input 120V AC, 60 Hz; Output 9V DC, 210 mA)
•Rechargeable NiMH Battery Pack (model # BT-1011)
Use only the Uniden BT-1011 rechargeable battery pack supplied with your cordless telephone.
Locate the battery |
Line up the red and black |
pack, battery cover |
wires on the battery pack |
and the handset. |
connector with the sticker in |
Battery |
the handset’s battery |
compartment. |
|
pack |
|
Battery |
|
cover |
|
Handset
Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the battery wires to make sure the connection is secure.
Place the cover over the battery compartment and slide it up into place.
Insert the tabs on the sides of the belt clip into the holes on either side of the handset. Press the belt clip down until it clicks into place. (Tug on the clip to make sure it’s secure.)
To remove the belt clip, gently pull the tabs out of the holes, then slide the belt clip off of the handset.
The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charging cradle.
Use only the Uniden PS-0007 AC adapter with the charging cradle.
Place the cord |
|
|
through the molded |
Connect the AC adapter to a |
|
wiring channel. |
||
standard 120V AC wall outlet. |
||
|
Place the handset in the charging cradle with the display facing forward.
Make sure that the charge LED illuminates when the handset is seated.
Reseat the handset; make sure the contacts on the bottom of the handset
are lined up with the contacts in the cradle.
Check the AC adapter connection. Make sure you are not using an outlet that’s controlled by a wall switch.
Charge your handset at least 15 to 20 hours before using your new handset for the first time.
Your phone may be used with an optional headset. To use a headset, insert the
headset plug into the headset jack. Headsets may be purchased by calling the Uniden Parts Department. See the
back cover page for contact information.
You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.)
To register to a DECT3080 base:
Place the accessory handset in the base. While the handset is registering, HANDSET REGISTERING appears in the LCD. When REGISTRATION COMPLETE is displayed, the handset has been registered to the base.
To register to a DECT2060 or DECT2080 base:
) Disconnect the base AC adapter.
) Press and hold [find hs] while you reconnect the adapter. Keep pressing [find hs] until the charge LED starts to blink.
3)On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.
4)When the handset finishes registering, it shows
REGISTRATION COMPLETE in the display.
What if the display shows REGISTRATION FAILED? Repeat the process starting with step 1.
To register to a DECT2085 or DECT2088 base:
) With the phone in standby, press [Menu/Select] on the base.
) Press [] to move the cursor to REGISTER HANDSET and then press [Menu/Select]. HANDSET REGISTERING appears.
3)On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.
4)When the handset finishes registering, it shows
REGISTRATION COMPLETE in the display.
What if the display shows REGISTRATION FAILED? Repeat the process starting with step 1.
If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset.
) Press and hold [ ] and [#] for at least five seconds, until the
SYSTEM RESET menu appears.
) Select the DEREGISTER HS submenu by pressing [Select/ menu]. WHICH HANDSET? appears in the display.
3)Use [] or [] to select the handset ID to be de-registered
from the list, and then press [Select/menu]. DEREGISTER HS appears.
4)Press [] to move the cursor to YES, and then press
[Select/menu]. You will hear a confirmation tone.
If the original base this handset was registered to is not available for some reason (for example, it is lost or somehow incapacitated), you can still reset the handset and use it with another base.
) Press and hold [ ] and [#] for at least five seconds, until the
SYSTEM RESET menu appears.
) Press [] to move the cursor to BASE UNAVAILABLE and then press [Select/menu].
3)Press [] to move the cursor to the base which you want to de-register from, and then press [Select/menu]. BASE UNAVAILABLE appears.
4)Press [] to move the cursor to YES, and then press
[Select/menu]. You hear a confirmation tone, and the handset deletes its own link to the base without trying to contact the base.
Now you are ready to register the handset to the new base.