TRENDnet TV-IP512WN User Manual

Quick Installation Guide

TV-IP512WN

1.31

Table of Contents

English 1

1. Before You Start

2. Hardware Installation and Configuration 2

Troubleshooting 8

Version 02.08 .2010

1. Before You Start

Package Contents

TV-IP512WN

?Utility CD-ROM ?Multi-Language Quick Installation Guide ?2 x 2dBi Detachable Antenna

RJ-45 Cable

?Mounting Kit ?AC Power Adapter (12V, 1.5A)

System Requirements

10/100Mbps Ethernet Adapter

? ?CD-ROM Drive

CPU: 2GHz processor or above

Memory: 256MB RAM or above / 512MB RAM or above (Windows Vista)

Windows 7 2000

?(32/64-bits) / Vista(32/64-bits) / XP(32/64-bits) /

VGA Resolution: 800 x 600 or above

Web Brower: Internet Explorer (6.0 or higher)

? ?Wireless router or access point ?An available DHCP Server –routers usually have a built-in DHCP server.

2. Hardware Installation and Configuration

Note:

1. It is recommended that you configure the IP Camera from a wired computer.

2. If you would like to use IPViewPro 2.0 software, please install the software by clicking the Install IPView Pro 2.0 in the Autorun window and refer to the User's Guide on the CD for more information.

1. Insert the Utility CD-ROM into your CD-ROM drive.

2. Click Run Setup.exe (Windows 7/Vista only).

3. Click Setup Wizard.

4. Click Next. Then follow the Setup Wizard

instructions.

5. Click Next.

6. Double click on the SetupWizard icon on your

desktop.

7. Attach the 2 antennas to the IP camera.

8. Connect a RJ-45 network cable from a

Switch/Router to the Ethernet port on the IP Camera.

9. Connect the AC Power Adapter to the IP Camera and then to a power outlet.

10. Click Next.

+ 9 hidden pages