TRENDnet TV-IP410WN User Manual

Quick Installation Guide

TV-IP410WN

1.01

Table of Contents

English 1

1. Before You Start

2. Hardware Installation 2

3. Configure the IP Camera 3

Troubleshooting 7
Wireless Tips 8

1

Version 03.04.2011

1. Before You Start

Supported Operating Systems

CPU

1-8 Cameras

CPUMemory Memory

9-32 Cameras

Windows 7 (32/64-bit)

Windows Vista (32/64-bit)

Windows XP (32/64-bit)

Intel Core2
Duo

Intel Core2
Quad

4GB RAM
or above

Intel Core2
Duo

Intel Core2
Quad

4GB RAM
or above

Intel Core2
Duo

Intel Core2
Quad

4GB RAM
or above

2GB RAM
or above

2GB RAM
or above

2GB RAM
or above

Package Contents

TV-IP410WN

Ÿ
ŸCD-ROM (Utility and User's Guide)

Multi-Language Quick Installation Guide

Ÿ

Network Cable (1.5m / 5ft)

Ÿ
Ÿ1 x 2dBi Detachable Antenna
ŸMounting Kit
ŸPower Adapter (12V DC, 1.5A)

System Requirements

Ÿ

A computer with a wired network adapter properly installed

ŸCD-ROM Drive
ŸVGA Resolution: 800 x 600 or above
ŸWeb Browser: Internet Explorer (6.0 or higher)
ŸWireless Router (e.g. TEW-691GR) or Access Point (e.g. TEW-690AP)
ŸAn available DHCP Server – routers usually have a built-in DHCP server

SecurView Pro Requirements

1

2. Hardware Installation

1. Attach the antenna to the IP Camera.

2. Connect the provided network cable from one

of your Router's network portsto the Ethernet
port on the IP Camera.

3. Connect the Power Adapter to the IP Camera
and then to a power outlet.

4. Verify the Power (Amber) and Link

(Green/Blinking) LEDs are on.

2

3. Configure the IP Camera

Note:

1. It is recommended that you configure the IP Camera from a wired computer.

1. Insert the Utility CD-ROM into your CD-ROM

drive.

2. Click Run autorun.exe (Windows 7/Vista only).

3. Click IPSetup.

4. Follow the Installation Wizard instructions.

5. Once installation is complete click Close.

6. Click the Start (Windows XP) or Windows

(Windows 7) icon.

7. Go to ProgramsŽ TRENDnet Ž IP Setup and
click IP Setup.

3