TRENDnet TV-IP400, TV-IP400W User Manual 3
TV-IP400
TV-IP400W
Quick Installation Guide
Version 09.08.05
TRENDnet
TRENDware, USA
What's Next in Networking
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
Table of Contents
English ......................................................................................................
1. Prepare for Installation ......................................................................
2. Install Hardware ................................................................................
3. Configure the Internet Camera ..........................................................
4. Using the Internet Camera Wirelessly (TV-IP400W only) .................
Troubleshooting ........................................................................................
1
1
2
3
5
7
English QIG
1. Prepare for Installation
Thank you for purchasing the TV-IP400/TV-IP400W. This Internet Camera will
allow you to view live images from internal and external networks.
This guide will help you set up and configure your Internet Camera. Following
the installation instructions should be quick and easy. If you run into problems,
please refer to the Troubleshooting section or the more detailed installation
procedures on the CD User's Guide. If you need further technical support,
please visit www.trendnet.com or call our technical support department by
phone.
Verify Package Contents
Please make sure you have everything in the box:
TV-IP400/TV-IP400W
TV-IP400
TV-IP400W
Quick Installation Guide
Version 09.08.05
TRENDnet
TRENDware, USA
What's Next in Networking
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
Quick Installation Guide
Utility CD-ROM
AC Power Adapter
System Requirement
1. 10/100Mbps Ethernet
2. CD-ROM Drive
3. CPU: Intel Pentium III 450MHz or above
4. Memory: 128MB or above
5. Web Browser: Microsoft Internet Explorer 5.0 or above, Netscape
Navigator 6.0 or above
6. VGA Resolution: 800 x 600 or above
1
English
2. Install Hardware
1. Place the camera on a flat, level surface.
2. Connect the RJ-45 network cable to the Internet Camera then connect the
other end of the network cable to a switch or hub.
3. Connect the power adapter to the Internet Camera. Make sure use the
power adapter supplied with the Internet Camera.
Note: Using a different power adapter may damage the unit.
TV-IP400
3
2
3
TV-IP400W
2
2
English
Loading...