TRENDnet TV-IP344PI Installation

Quick Installation Guide

TV-IP344PI (V1)

Table of Content

1 English

1. Before You Start

2. Hardware Installation and Configuration

1. Before You Start

Supported Operating
Systems

1-8 Cameras

CPU CPU

9-32 Cameras

Memory Memory

Windows 10 /
Windows 8.1 /
Windows 8 /
Windows 7 /
Windows Server 2008 /
Windows Server 2012

2 GHz 2 GHz2 GB RAM

or above

4 GB RAM
or above

Package Contents

Ÿ TV-IP344PI
Ÿ CD-ROM (Utility, Software and User's Guide)
Ÿ Quick Installation Guide
Ÿ Network cable (1.5m / 5ft.)
Ÿ RJ-45 coupler
Ÿ Camera Mounting hardware

Minimum Requirements

Ÿ Power over Ethernet (PoE) switch (e.g. TPE-S50) or PoE Injector (e.g. TPE-113GI)
Ÿ A networked computer and web browser
Ÿ Wired network

Note:

Ÿ The TV-IP344PI only works with Power over Ethernet (PoE) devices that follow the IEEE

802.3af standard.

Ÿ The TV-IP344PI has a 5.5 mm barrel connector for an optional 12 V DC 1A power adapter.
Ÿ Optional power supply not included.

TRENDnetVIEW Pro Requirements

1

2. Hardware Installation and Configuration

Next

1. Do not install or mount the IP camera until after you complete the installation steps below.
Temporarily place the IP camera next to your computer.

2. Insert the Utility CD-ROM into your CD-ROM drive.

3. Select language from the drop down menu.

4. Click Install Camera.

5. Write down the MAC address of your camera. Then click Next.

2

6. Connect a network cable from the camera's network port to your PoE source. The IR LEDs will

Next

Next

turn on and show a dim visible red light. Allow 60 seconds for the camera to boot up. Then
click Next.

7. Select your camera. Click Next and follow the instructions.

3