RV73* Digital
Series
XV73* Digital
Series
MV73* Digital
Series
English
Contents |
|
INSTALLING YOUR TV |
|
Safety Precautions ........................................... |
4 |
Installation and important information .............. |
5 |
The remote control .......................................... |
6 |
Inserting batteries and effective range of the |
|
remote ................................................... |
7 |
CONNECTING YOUR TV |
|
Connecting external equipment ........................ |
8 |
Connecting an HDMI® or DVI device to the HDMI |
|
input ............................................................ |
9 |
To connect an HDMI device ........................ |
9 |
To connect a DVI device ............................. |
9 |
REGZA-LINK connection ................................. |
10 |
Connecting a computer .................................. |
11 |
To connect a PC to the RGB/PC terminal ... |
11 |
To connect a PC to the HDMI terminal ...... |
11 |
Connecting a home network ........................... |
12 |
To connect the TV to a home network |
|
- Wired ................................................. |
12 |
To connect the TV to a home network |
|
- Wireless ............................................. |
12 |
Controls and input connections ...................... |
13 |
Switching on ........................................... |
13 |
Using the remote control .......................... |
13 |
Using the controls and connections ........... |
13 |
SETTING UP YOUR TV |
|
Startup Application ........................................ |
14 |
Quick Setup ............................................ |
14 |
Ant/Cable In (if available) ........................ |
15 |
Auto Tuning ............................................ |
16 |
ATV Manual Tuning ....................................... |
16 |
Tuning .................................................... |
16 |
Skip ........................................................ |
18 |
Sorting positions ...................................... |
18 |
DTV Manual Tuning ....................................... |
19 |
Manual Tuning ........................................ |
19 |
Manual Tuning for DVB-C ........................ |
19 |
DTV Settings .................................................. |
19 |
Channels ................................................ |
19 |
Standby Channel Update ......................... |
20 |
DVB Character Set ................................... |
20 |
Dynamic Scan ......................................... |
20 |
Location setting ....................................... |
20 |
Analogue switch-off ............................... |
20 |
CONTROLS AND FEATURES |
|
General controls ............................................ |
21 |
Quick Menu ............................................ |
21 |
Selecting positions ................................... |
21 |
The Time Display – analogue only ........... |
21 |
Stereo and Bilingual transmissions ............ |
21 |
Sound controls .............................................. |
22 |
Volume controls and mute sound .............. |
22 |
Dual ....................................................... |
22 |
Balance, Bass and Treble ......................... |
22 |
Sound Navi (XV/MV series only) ................ |
22 |
Surround Settings .................................... |
23 |
Dolby Volume® (RV/XV series only) ........... |
23 |
Dynamic Range Control ........................... |
23 |
Audio Level Offset ................................... |
23 |
TV Speakers (XV/MV series only) ............... |
23 |
Headphone Settings ................................ |
24 |
Audio Description .................................... |
24 |
Widescreen viewing ....................................... |
25 |
Picture controls .............................................. |
27 |
Picture Mode ........................................... |
27 |
Picture preferences .................................. |
27 |
Reset ...................................................... |
27 |
3D Colour Management .......................... |
27 |
Base Colour Adjustment ........................... |
28 |
Colour Temperature ................................ |
28 |
Auto Brightness Sensor Settings ................ |
28 |
Active Backlight Control ........................... |
29 |
Black/White Level .................................... |
29 |
Static Gamma ......................................... |
29 |
MPEG NR – Noise Reduction ..................... |
29 |
DNR – Digital Noise Reduction ................. |
29 |
Resolution+ ............................................ |
29 |
Active Vision M100 (XV/MV series only) ..... |
29 |
Film Stabilization (XV/MV series only) ....... |
30 |
Cinema Mode (RV series only) .................. |
30 |
Expert Mode ............................................ |
30 |
Resetting the advanced picture settings ..... |
30 |
Control Visualization ............................... |
30 |
Automatic Format (Widescreen) ................ |
31 |
4:3 Stretch .............................................. |
31 |
Blue Screen ............................................. |
31 |
Picture Position ........................................ |
31 |
Picture still .............................................. |
31 |
HDMI Information Display ........................ |
31 |
Using your home network .............................. |
32 |
Setting up the Network .................................. |
33 |
Wireless Setup ........................................ |
33 |
Advanced Network Setup ......................... |
35 |
2
Using the software keyboard .......................... |
36 |
Setting up the Media Renderer feature ............ |
37 |
Installation .............................................. |
37 |
Media Renderer ....................................... |
37 |
Device Name Setup ................................. |
37 |
Web Password Setup ................................ |
38 |
Media Controller Setup ............................ |
38 |
Maximum Volume Setup .......................... |
38 |
Using the Media Player .................................. |
39 |
Basic operation ....................................... |
39 |
Viewing photo files .................................. |
41 |
Viewing movie files (on DLNA CERTIFIED™ |
|
Server) ................................................. |
42 |
Playing music files (on DLNA CERTIFIED™ |
|
Server) ................................................. |
44 |
Using the Photo Frame feature ....................... |
46 |
To open Photo Frame ............................... |
46 |
Setting the features ................................. |
46 |
Other features ............................................... |
48 |
Panel Lock .............................................. |
48 |
TOSHIBA Illumination .............................. |
48 |
The timers ..................................................... |
48 |
Programme Timers – digital only ............. |
48 |
On Timer ................................................ |
49 |
Sleep Timer ............................................. |
49 |
Energy Saving Settings ................................... |
50 |
Automatic Power Down ............................ |
50 |
No Signal Power Down ............................ |
50 |
Digital on-screen information and Programme |
|
Guide ......................................................... |
50 |
Information ............................................. |
50 |
Guide ..................................................... |
51 |
Genre selection/searching ....................... |
52 |
Digital settings – parental control .................. |
52 |
Setting the PIN ........................................ |
52 |
Parental Setup ......................................... |
53 |
Digital settings – Channel Options ................. |
53 |
Selecting favourite channels ..................... |
53 |
Favourite Channel Lists ............................ |
53 |
Skip channels .......................................... |
54 |
Locking channels ..................................... |
54 |
Digital settings – other settings ....................... |
54 |
Subtitles .................................................. |
54 |
Audio languages ..................................... |
54 |
Common Interface ................................... |
55 |
Software Upgrade and Licences ...................... |
55 |
Auto Upgrade ......................................... |
55 |
English
Searching for New Software ..................... |
55 |
Software Licences .................................... |
55 |
System Information and Reset TV .................... |
56 |
System Information .................................. |
56 |
Reset TV .................................................. |
56 |
PC Settings ................................................... |
56 |
Horizontal and Vertical Position ................ |
56 |
Clock Phase ............................................ |
56 |
Sampling Clock ....................................... |
57 |
Reset ...................................................... |
57 |
Input selection and AV connections ................. |
57 |
Input selection ........................................ |
57 |
External input skip ................................... |
58 |
Input signal selection ............................... |
58 |
Labeling video input sources .................... |
59 |
Woofer setting (XV/MV series only) ........... |
59 |
PC Audio ................................................ |
59 |
HDMI 3* Audio ........................................ |
59 |
HDMI Settings ......................................... |
60 |
Digital Audio Output ............................... |
60 |
Using REGZA-LINK ........................................ |
61 |
Enable REGZA-LINK ................................. |
61 |
TV Auto Power ......................................... |
61 |
Auto Standby .......................................... |
61 |
Amplifier Control ..................................... |
61 |
Speaker Preference .................................. |
61 |
REGZA-LINK input source selection ........... |
61 |
REGZA-LINK playback device control ........ |
62 |
REGZA-LINK one touch play ..................... |
62 |
REGZA-LINK system standby ..................... |
62 |
REGZA-LINK system audio control ............. |
62 |
REGZA-LINK PC link ................................ |
62 |
TEXT SERVICES |
|
Text services .................................................. |
63 |
Selecting modes ...................................... |
63 |
Text information ...................................... |
63 |
Navigating pages using Auto ................... |
63 |
Navigating pages using LIST .................... |
63 |
Control buttons ....................................... |
64 |
PROBLEM SOLVING |
|
Questions and Answers ................................ |
65 |
INFORMATION |
|
License Information ....................................... |
68 |
Information ................................................... |
70 |
Specifications and accessories ........................ |
72 |
3
English
INSTALLING YOUR TV
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature and are intended to help with all electronic consumer products. Some points may not apply to the goods you have just purchased.
Air Circulation
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead.
DO NOT cut off the mains plug from this equipment. The plug incorporates a special Radio Interference Filter, the removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.
Do
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights, on or close to equipment. High temperatures can melt plastic and lead to fires.
WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.
DO NOT use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturers’ approved stand, bracket or legs with the fixings provided according to the instructions.
DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.
DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.
WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.
NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.
4
INSTALLING YOUR TV
Installation and important information
Where to install
Locate the television away from direct sunlight and strong |
Fixing strap |
|
lights, soft, indirect lighting is recommended for |
||
|
||
comfortable viewing. Use curtains or blinds to prevent |
|
|
direct sunlight falling on the screen. |
|
Place the TV on a stable, level surface that can support the weight of the TV. In order to maintain stability and prevent it falling over, secure the TV to the level surface using the strap located under the table top stand, or to a wall using a sturdy tie to the clip on the back of the table top stand.
The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a sign of a malfunction.
Sturdy tie (as short as possible)
Stand clip
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also please be certain that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (eg: Super Live) will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)fire;
ii)earthquake;
iii)accidental damage;
iv)intentional misuse of the product;
v)use of the product in improper conditions;
vi)loss and/or damage caused to the product whilst in the possession of a third party;
vii)any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;
viii)any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
NOTE: A Toshiba wall bracket or stand, where available, must be used.
English
5
English
INSTALLING YOUR TV
The remote control
Simple at-a-glance reference for your remote control.
2 |
1 |
3 |
|
|
4 |
5 |
|
|
7 |
|
6 |
9 |
|
10 |
8 |
|
11 |
||
|
12 |
|
13 |
14 |
|
15 |
18 |
|
17 |
||
19 |
||
16 |
||
|
20 |
1For On/Standby mode (T/R/D)*
2To select device mode (T/R/D)
3Number buttons (T/R/D)
4Switch the Audio Description On/Off (T)
5To select external input sources (T/R/D)
6To alter the TV volume (T/R/D)
7To mute the TV sound (T/R/D)
8To access Quick Menu (T)
9To change programme positions (T/R) To change text pages (T)
10To display the digital on-screen Programme Guide (T)
11 |
To exit menus (T) |
|
12 |
When using menus, the arrows move the cursor on the |
|
|
screen up, down, left or right. Press Qto confirm your |
|
|
selection (T/R/D) |
|
13 |
To display on-screen information (T/R/D) |
|
|
To access index page in Text mode (T) |
|
14 |
To return to previous menu (T/R/D) |
|
15 |
Colour buttons Text and interactive service control |
|
|
buttons (T) |
|
|
ROOT |
To display Root Menu (R) |
|
CONTENTS To display Contents Menu (R) |
|
|
TOP |
To access Top Menu (R/D) |
|
DVD |
DVD Menus (R/D) |
16 |
sStereo/bilingual transmissions (T) |
|
|
AUDIO To access Audio menu (R/D) |
|
17 |
SUBTITLE Digital Subtitles or Analogue TEXT Subtitle |
|
|
pages if available (T) |
|
|
SET UP To access Setup menu (R/D) |
|
18 |
Widescreen viewing (T/R/D) |
|
19 |
To call up text services (T) |
|
20 |
When in TV mode: |
|
|
MENU |
On-screen menus |
|
TV |
To switch between ATV (analogue television) |
|
LIST |
and DTV (digital television) |
|
To access the analogue or digital Channel List |
|
|
r |
Picture still |
D Analogue time display
When in Text mode:
ATo reveal concealed text
BTo hold a wanted page
CTo enlarge text display size
DTo select a page whilst viewing a normal picture
When using the Programme Guide:
Z |
- 24 hours |
z |
+ 24 hours |
CC |
- 1 page |
cc |
+ 1 page |
REGZA-LINK or DVD mode: press V to EJECT
press v to STOP press c to PLAY
press W/w to PAUSE/STEP press Z to SKIP-BACK press CC to REWIND
press cc to FAST FORWARD press z to SKIP-FORWARD
* T=TV mode, R=REGZA-LINK mode, D=DVD mode
6
Inserting batteries and effective range of the remote
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove dead
batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 69 of this manual. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.
INSTALLING YOUR TV
English
7
English
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
LAN port |
|
|
OPTICAL DIGITAL AUDIO OUTPUT |
ILLUSTRATION SHOWS THE XV MODEL. |
|
|
||
HDMI® INPUT |
RV/XV series |
|
SOCKETS |
||
only |
||
|
||
COMPONENT VIDEO INPUT (EXT 3) |
|
|
SCART 2 (EXT 2) |
|
|
SCART 1 (EXT 1) |
|
|
|
POWER switch |
|
*a decoder could |
|
|
be Digital Satellite or |
FIXING STRAP |
|
any other compatible |
|
|
decoder. |
VARIABLE WOOFER OUT (XV/MV series only) |
|
|
||
|
VARIABLE AUDIO OUT (XV/MV series only) |
Antenna/Cable
decoder*
media recorder
Aerial cables: - - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the video recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto Tuning, put your decoder and media recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a suitable surround sound system. NOTE: this output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with a DVD decoder or electrical equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p high-definition video signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.
LAN port is used to connect the TV to your home network. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function.
A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.
We recommend SCART 1 for a decoder and SCART 2 for a media recorder.
If connecting S-Video equipment, set EXT 2 Input mode to S- VIDEO. See page 58.
The VARIABLE AUDIO OUT sockets allow you to listen to your TV's audio through your audio system.
The VARIABLE WOOFER OUT socket allows you to connect an external Sub-Woofer.
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press o to select between DTV, EXT 1, EXT 2, EXT 3, EXT 4,
HDMI 1, HDMI 2, HDMI 3, HDMI 4*, PC or ATV.
When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/audio signals.
* RV/XV series only
8
CONNECTING YOUR TV
Connecting an HDMI® or DVI device to the HDMI input
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 71.
NOTE:
•Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard. Please unplug your HDMI cable first and then try setting the
INSTAPORT™ and Enable Content Type options to “Off”. Your early HDMI source should operate properly with your television. See page 60.
•Supported Audio format: Linear PCM, sampling rate 32/ 44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).
•If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.
•HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).
•See “HDMI 3* Audio” on page 59.
The HDMI 4 terminal is located on the side of the television.
To connect a DVI device
Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 3* terminal and audio cables to the PC/HDMI 3* (AUDIO) socket (see illustration).
•The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m).
•An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required.
•See “HDMI 3* Audio” on page 59.
* On MV series, this is HDMI 2.
Audio cable for HDMI to television connection
(not supplied)
|
|
|
|
DVI device |
HDMI-to- DVI |
|
|
|
|
|
||||||||||
|
|
|
|
adaptor Cable |
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:
•When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.
•When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.
English
HDMI cable
HDMI device
To view the HDMI device video, press the o button to select HDMI 1, HDMI 2, HDMI 3 or HDMI 4** mode.
** RV/XV series only
9
English
CONNECTING YOUR TV
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 61–62.
AV amplifier |
Playback device |
Playback device
For the setup shown above, you will need three HDMI cables (see page 9).
NOTE:
•If several devices are connected, the REGZA-LINK feature may not operate properly.
•For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( )
•The HDMI 4 (HDMI 3 for MV series) terminal is located at the side of the television.
•This function is available with one PC and one AV amplifier. This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
•After completing the above connections, set the REGZA-LINK Setup menu as you desire (see page 61).
•The connected devices must also be set. For details, see the operation manual for each device.
•The REGZA-LINK feature uses CEC technology as regulated by the HDMI standard.
•This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.
10
CONNECTING YOUR TV
Connecting a computer
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers.
To connect a PC to the RGB/PC terminal
When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable and a PC audio cable for the PC/HDMI 3* (AUDIO) socket. Select PC from the PC/HDMI 3* Audio options in the AV Connection menu located in the SETUP menu.
* On MV series, this is HDMI 2.
the back of your television
•A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.
•When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the
SETUP menu.
•If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adaptor cable and an analogue audio cable.
If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary (see page 9).
the back of your television
English
Mini D-sub 15 pin connector
Computer
Audio cable for PC to television connection
(not supplied)
RGB PC cable
(not supplied)
Conversion adaptor if required (not supplied)
To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 70.
To display the optimum picture, use the PC setting feature (see page 56).
NOTE:
•The PC audio input terminal on the television is shared with the HDMI 3 (HDMI 2 for MV series) analogue audio input terminal (see page 59).
•Some PC models cannot be connected to this television.
•An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.
•Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multiangle scenes.
Computer
HDMI-to-DVI |
Audio cable |
adaptor cable |
for PC to |
|
television |
|
connection |
|
(not supplied) |
For acceptable PC and video signal formats, see page 71.
NOTE:
•The edges of the images may be hidden.
•If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
11
English
CONNECTING YOUR TV
Connecting a home network
The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV.
NOTE:
•The TV’s home network connection allows access to file sharing only. You will NOT be able to use the TV to access the Internet.
•If you connect to a shared-network outside your home, please use the router, and use DLNA in a private network environment.
•If you use a Hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and have to manually set up the network address. See page 36.
•If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.
•If you connect the TV and PC directly, use a crossover LAN cable.
To connect the TV to a home network - Wireless
Please refer to "Wireless Setup" section on page 33.
Access point (AP)
Wireless LAN router |
TV right |
side panel |
Modem
PC
TOSHIBA Dual Band WLAN adaptor (not supplied)
If you use the Gooseneck cable to connect the WLAN adaptor;
To connect the TV to a home network - Wired
the back of your television
Modem (if available) |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
Router with Hub |
|
|
|
||||||||||
|
|
|
|
|||||||||||
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[1][2]
[2][3]
Server PC
Cable or
Phone jack
[2]
Gooseneck cable (not supplied)
TOSHIBA Dual Band
WLAN adaptor
Gently bend the Gooseneck cable to adjust the angle.
The gooseneck cable can be adjusted so it is not seen from the front. However, adjust the angle properly to get a stable reception condition.
The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.
[1]Coaxial or telephone cable (depending on your modem type)
[2]Standard LAN cable
[3]Do NOT connect a phone jack directly to the TV's LAN port.
12
CONNECTING YOUR TV
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
ILLUSTRATION SHOWS THE XV MODEL.
POWER switch
(Full Power Down Option)
ORANGE LED - Programme timer set (digital only)
RED LED – Programme timer Active (digital only)
GREEN LED – On Timer set
RED LED – Standby GREEN LED – Power on
Standby
SD card slot (XV/MV series only) To access photo files
COMMON INTERFACE
The Common Interface is for a Conditional Access Module (CAM).
Contact a service provider.
USB 1 Photo Viewer
HDMI 4 INPUT (On MV |
series this is HDMI 3.) |
INPUT 4 (EXT 4)
USB 2 Photo Viewer/ Wireless LAN adaptor ready for a home network
English
Switching on
If the RED LED is unlit, check that the mains plug is connected to the power supply and press the ! (POWER) button on the left side of the television to switch the television on. If the picture does not appear, press 1on the remote control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press 1 on the remote control. To view the television, press 1 again. The picture may take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory settings. The factory settings are for energy saving.
Turning the television off at its mains supply, or un-plugging it, will cut energy use to nearly zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills.
NOTE: Putting the television into standby mode, will reduce energy consumption, but will still draw some power.
Using the remote control
Press MENU on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is selected by pressing C or c on the navigation ring on the remote control, its respective options will appear below.
NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode they will appear greyed out.
To use the option, press B and b on the remote control to move up and down and press C or c to select your desired setting. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual.
Using the controls and connections
To alter the volume press – 2 +.
To alter the programme position press b p B.
Press MENU and I, i, U or u to control the sound and picture options.
Press MENU to finish.
The Photo Viewer feature provides access to photo files stored on a USB storage device or SD memory card (XV/MV series only).
NOTE: The USB socket has limited functionality, and Toshiba can take no responsibility for damage to other connected equipment.
The USB 2 socket has to be used with the “TOSHIBA Dual Band WLAN Adaptor WLM-10U2” in order to access a wireless network (sold separately).
You must use the TOSHIBA Wireless LAN device to ensure correct operation of this feature. This feature is available only when the “TOSHIBA Dual Band WLAN adaptor“ is used.
NOTE: As of Mar. 2010, the TOSHIBA Dual Band WLAN Adaptor is not licensed to be sold in Russia.
To select an external input, press ountil the appropriate input source is selected.
Please always refer to the owner’s manual of the equipment to be connected for full details.
13
English
SETTING UP YOUR TV
Startup Application |
g Press Q, and the TV Mounting screen will appear |
|
(XV/MV series only), press C or c to select Stand or |
Before switching on the television, put your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 6.
Quick Setup
a Press the 1 button. The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected.
b Press B, b, C, or cto select the menu language, and then press Q.
c Highlight Country and C or c to select. The television is now set to tune the stations for your country.
Quick Setup |
|
|
||
|
Country |
|
Germany |
|
|
Primary Subtitle Language |
|
English |
|
|
Secondary Subtitle Language |
|
English |
|
|
Primary Audio Language |
|
English |
|
|
Secondary Audio Language |
|
English |
|
|
|
|
|
|
Wall.
TV Mounting
If you are mounting the TV on a wall please select [Wall]. [Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the SOUND menu.
Stand
h Press Q, and the AutoView screen will appear, press C or c to select Yes or No.
AutoView
AutoView mode automatically adjusts picture settings to suit ambient light conditions.
Do you wish to enable AutoView mode?
No
i Press Q. If the Ant/Cable screen appears, press B or b to select Antenna or Cable, and then press Q to check ( ).
Ant/Cable
Antenna
Cable
Next
NOTE:
•The following display menus will differ slightly according to the country you selected.
•If there is not a country that you want to select in the list, select Others.
d Press Q, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use.
Home
e Press C or c to select Home or Store. For normal home use, select Home.
f Press Q. If Store is selected in step 5, a Store mode confirmation window will appear. If you select Yes from that window, the TV will proceed to the Auto Demo setup screen.
j Select Next and press Q. The Auto Tuning start up screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Use C or c to select the appropriate mode.
k Press Bor bto highlight Start Scan, and then press Q.
The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.
You must allow the television to complete the search.
Auto Tuning |
|
|
|
|||
|
Progress |
|
Found |
|||
DTV Tune |
3% |
|
|
|
2 |
|
ATV Tune |
|
|
|
Waiting... |
|
|
|
|
|
|
Channel: C7 |
|
|
|
|
|
|
|
|
|
When the search is complete, the television will automatically select position one.
The Auto Tuning screen will display the total number of services found.
l Press C or c to view the DTV (digital channel) or ATV (analogue channel) lists.
14
SETTING UP YOUR TV
m Use B or b to move through the list to select a channel, and then press Qto view.
In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between ATV and DTV (DTV TV/DTV RADIO/DTV TEXT if available) modes.
NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.
PLEASE NOTE
The Reset TV menu can also be accessed at any time from the SETUP menu.
With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will be executed.
The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
Ant/Cable In (if available)
From this menu, you can set the RF input configuration to cable.
a Press MENU, and select SETUP menu.
b Use b to highlight Ant/Cable In and use C or c to select Antenna or Cable.
NOTE: When you attempt to change the Ant/Cable In setting, a warning message will appear followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning.
c When Ant/Cable In is set to Cable, the following setting options will be provided in the Auto Tuning screen.
This sets the frequency at which the scan will end.
*Valid entry range for frequency items is 113.000858.00 for C-Book/Other and 114.000-858.00 for Nordig-C. If numbers outside of this range are entered, the values will automatically be set to the min. or max. valid value as appropriate.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
*Valid entry range for Symbol Rate is 4000-7200. If a number outside of this range is entered, the value will be automatically set to the min. or max. valid value as appropriate.
Press B or b to select an item, and then press Cor c to select your desired option.
Auto Tuning
Tuning Mode |
|
DTV and ATV |
||
|
|
|
||
|
|
Start Scan |
|
|
|
|
|
|
|
DTV |
|
|
|
|
|
|
|
|
|
Scan Type |
|
Quick Scan |
||
|
|
|
|
|
Start Frequency |
|
Auto |
||
|
|
|
|
|
End Frequency |
|
Auto |
||
|
|
|
|
|
Modulation |
|
Auto |
||
|
|
|
|
|
Symbol Rate |
|
Auto |
||
|
|
|
|
|
Network ID |
|
Auto |
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is greyed out when DTV Scan Type is set to “Full Scan”.
*Valid entry range for Network ID is 1-65535. If a number outside of this range is entered, the value will be automatically set to the min. or max. valid value as appropriate.
English
15
English
SETTING UP YOUR TV
Auto Tuning
NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost.
a Press MENU and use C or c to select SETUP menu. Use b to highlight Auto Tuning. Press Q.
SETUP
Menu Language |
English |
|
|
Country |
Germany |
|
|
Ant/Cable In |
Antenna |
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
b A screen will appear warning that previous programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
Tuning Mode |
DTV and ATV |
Start Scan
Use C or c to select DTV and ATV, DTV or ATV, if available, then highlight Start Scan and press Qto continue with the Auto Tuning.
NOTE: If you have selected "Others" for the Country field in the SETUP menu, and selected a tuning mode other than "DTV" , choose the optimum ATV broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV and/or ATV services.
You must allow the television to complete the search.
When the search is complete, the Auto Tuning screen will display the services found.
c Use b or B to move through the list to select a channel, and then press Qto view.
ATV Manual Tuning
Tuning
The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System.
Use C and c to move across the screen and select any of the ATV Manual Tuning options. Then use B or b to adjust the settings.
ATV Manual Tuning
System
1 I A C 2 0 V C R
1 2 3 4 5 6 7 8 9
1Position
The number to be pressed on the remote control to tune the channel.
2System
Specific to certain areas.
3Colour System
Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.
4Skip
Set Skip to On (8) or Off (() for the selected channel. See page 18
5Signal Class
The channel classification.
6Channel
The channel number on which a station is being broadcast.
7Search
Search up and down for a signal.
8Manual Fine Tuning
Only used if interference/weak signal is experienced. See page 65.
9Station
Station identification. Use the B or b and Cor c buttons to enter up to seven characters.
To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY, and then manually tune.
16
SETTING UP YOUR TV
a Press MENU and use C or c to select the SETUP menu. Press b to highlight ATV Manual Tuning and press Q to select.
SETUP
Menu Language |
English |
|
|
Country |
Germany |
|
|
Ant/Cable In |
Antenna |
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
b Use B or b to highlight the desired position. We suggest Pos. 0 for a media recorder.
ATV Manual Tuning |
|
|
Pos. |
Channel |
Station |
1 |
C2 |
|
2S10
3C7
4S40
5C22
6C25
7C28
8 C30
Different Channel numbers may be displayed.
c Press Qto select. If the channel chosen for the media recorder is set to skip, Skip should be removed before storing.
g Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search.
h When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR.
ATV Manual Tuning
Station
1 I A |
C 2 |
0 V C R |
i Press Qto save.
j Repeat for each position you want to tune, or press RETURN to return to the list of channels and select the next number to tune.
k Press EXIT when you have finished.
PLEASE NOTE
This television has direct channel entry if the channel numbers are known.
Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press Qto save.
d Press cto select System and use B or b to change if required.
ATV Manual Tuning
System
1 I A |
C 2 |
0 |
e Then press c to select Search.
f Press B or b to begin the search. The search symbol will flash.
ATV Manual Tuning
Search
1 I A |
C 2 |
0 |
English
17
English
SETTING UP YOUR TV
Skip |
|
Sorting positions |
To prevent certain channels from being viewed, positions can be skipped.
a Select ATV Manual Tuning from the SETUP menu.
b Use Bor bto highlight the position to be skipped and press Qto select.
ATV Manual Tuning |
|
|||
|
Pos. |
Channel |
Station |
|
|
|
|
|
|
|
1 |
|
C2 |
|
2S10
3C7
4 |
|
S40 |
ABC1 |
|
|
|
|
5 |
|
C22 |
ABC1 |
6C25
7C28
8C30
c Press c to select Skip.
d Use B or b to turn Skip on. Press Q.
8 on the screen indicates a skipped position.
ATV Manual Tuning
Skip: On
1 |
|
I |
|
A |
|
C |
2 |
|
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
e Press RETURN and repeat from Step 2 or press EXIT.
Each position has to be individually selected. To turn Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by PU and Pu or by the controls on the television but can still be accessed by the number buttons on the remote control.
Channels may be moved and saved to the position of your choice.
a Select ATV Manual Tuning from the SETUP menu.
b With the list of channels showing, use B or b to highlight the channel you want to move and press c.
ATV Manual Tuning |
|
|
|||
|
Pos. |
|
Channel |
Station |
|
|
|
|
|
|
|
|
2 |
|
S10 |
|
|
|
|
|
|
|
|
|
3 |
|
C7 |
|
|
|
|
|
|
|
|
|
4 |
|
C40 |
ABC1 |
|
|
|
|
|
|
|
|
5 |
|
C22 |
ABC1 |
|
|
|
|
|
|
|
|
1 |
|
C2 |
|
|
6C25
7C28
8C30
c Use B or bto move through the list to your preferred position. As you do so, the other channels will move to make room.
d Press C to save your move.
Repeat as necessary, and then press EXIT.
18
SETTING UP YOUR TV
DTV Manual Tuning
NOTE: This feature varies depending on the Ant/Cable In setting.
Manual Tuning
This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
a Select DTV Manual Tuning from the SETUP menu and press Q.
DTV Manual Tuning
Signal Strength |
WEAK |
AVERAGE |
STRONG |
|
Quality |
GOOD |
|
|
|
|
|
|
|
|
Channel |
|
|
|
13 |
Start Scan
b Enter the multiplex number using the number buttons or use C or c to adjust the number up or down.
c Highlight Start Scan, and then press Q. The television will automatically search for that multiplex.
DTV Manual Tuning |
|
|
|
|
|||
|
|
|
0 New Channels - Total 6 |
|
|
|
|
New Pos. |
Name |
|
Type |
||||
|
1 |
|
ABC ONE |
|
|
|
|
2 ABC TWO
7 ABC THREE
40 ABC NEWS 24
51 ABCi
When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.
d Repeat as necessary. Press EXIT to finish.
Manual Tuning for DVB-C
When Ant/Cable In is set to Cable, DTV Manual Tuning items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation options
Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan
DTV Settings
Channels
The channel order may be changed to suit your personal preference.
a Select DTV Settings from the SETUP menu and press
Q.
b Select Channels and press Q.
DTV Settings
Channels |
|
|
|
Subtitle and Audio |
|
PIN Setting |
|
|
|
Parental Control |
|
|
|
Local Time Setting |
|
|
|
Standby Channel Update |
Off |
|
|
DVB Character Set |
Standard |
|
|
Dynamic Scan |
On |
c For your convenience, you can jump to specific places in the list by one of two methods.
Channels |
|
TV |
|
|
||||
Line No. 1/10 |
Name |
|||||||
|
Pos. |
|
||||||
|
1 |
|
ABC ONE |
|
|
|
|
|
|
2 |
|
ABC TWO |
|
|
|
||
|
7 |
|
ABC THREE |
|
|
|
|
|
|
30 |
|
CABC Channel |
|
|
|
|
|
|
40 |
|
ABC NEWS 24 |
|
|
|
|
|
|
51 |
|
ABCi |
|
|
|
|
|
|
822 |
|
AA |
|
|
|
|
|
|
823 |
|
AC |
|
|
|
|
Line Number Jump — Use the number buttons
(0-9) to input the line number you want to select, and then press Q.
Station Letter Jump — Press CC or cc to jump to the next station name with a different initial letter.
It is also possible to change the Position number of a particular channel.
Renumber — Press the RED button to renumber the highlighted channel. Edit the channel number using the number buttons and press Q.
|
|
Pos. |
Name |
|||
|
- |
- |
- |
- |
BBC ONE |
|
|
|
|
|
|
|
|
English
19
English
SETTING UP YOUR TV
Move — Press the GREEN button to activate the Move feature. Use the B or b buttons to select the channel you wish to move and press Qto check. If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat as necessary.
Once all desired channels have been checked, use the B or b buttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.
Channels |
TV |
|
|
|
Line No. 1/10 |
||||
Pos. |
Name |
|||
1 |
ABC ONE |
|
|
|
2 |
ABC TWO |
7 |
ABC THREE |
30 |
CABC Channel |
40 |
ABC NEWS 24 |
51 |
ABCi |
822 |
AA |
823 |
AC |
DVB Character Set
This feature allows you to manually select the character set (Standard = Table 0, West = Table 5 or Latin alphabet 9) to be used for DVB-C or DVB-T channels.
a Select DTV Settings from the SETUP menu and press
Q.
b Press b to select DVB Character Set and use C or c to select Standard, West or Latin alphabet 9.
Dynamic Scan
If the broadcast information has changed in your DVB-T receiving area, the TV screen will display the message “Broadcast information has changed. Would you like to rescan now?”. Please follow the message. If you do not wish for the TV to detect changes and prompt you to rescan, you should set this feature to "Off".
a Select DTV Settings from the SETUP menu and press
Q.
Sort — Press the YELLOW button. A confirmation window will appear. Press C or c to select Yes and press Q.
Sort
Your existing channel order will be lost. Do you wish to continue?
Yes
The Sorting Type selection window will appear.
Sort
Sorting Type |
A - Z |
Sort
Press C or c to set the sorting type.
A - Z |
Station name order (A to Z) |
Channel Number Position No. order (numerical sequence)
Press b to highlight Sort and press Q.
Standby Channel Update
If the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed and any new channels are saved.
a Select DTV Settings from the SETUP menu and press
Q.
b Press b to select Dynamic Scan and use C or c to select On.
Location setting
You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc.
a Select Location from the SETUP menu.
b Press C or c to select Home or Store.
Analogue switch-off
This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.
b Press b to select Standby Channel Update and use
C or c to select On.
20
CONTROLS AND FEATURES
General controls
Quick Menu
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, More Information, Sleep Timer etc.
Press QUICK to display the Quick Menu and use B or b to select the option.
Quick Menu
Picture Mode |
|
AutoView |
|
|||
|
|
|
|
|
|
|
Picture Size |
|
Super Live |
|
|||
More Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
Channel Options |
|
|
|
|
|
|
|
|
|
|
|
|
|
Media Player |
|
|
|
|
|
|
|
|
|
|
|
|
|
Photo Frame |
|
|
|
|
|
|
|
|
|
|
|
|
|
Sleep Timer |
00:00 |
|
|
|||
|
|
|
|
|||
Speakers |
|
TV Speakers |
|
|||
|
|
|
|
|
|
|
Headphone Level |
0 |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
Wireless Information |
|
|
|
|
|
|
NOTE: Quick Menu items are different depending on the current mode.
Quick menu item example
Mode |
Quick menu item |
Description |
|
When viewing a TV |
Picture Mode |
See page 27. |
|
programme or |
|
|
|
Picture Size |
See page 25. |
||
pictures from the |
|||
|
|
||
external input |
More Information |
See page 51. |
|
|
|
|
|
|
Channel Options |
See page 53. |
|
|
|
|
|
|
Media Player |
See page 39. |
|
|
|
|
|
|
Photo Frame |
See page 46. |
|
|
|
|
|
|
Sleep Timer |
See page 49. |
|
|
|
|
|
|
Speakers |
See page 61. |
|
|
|
|
|
|
Headphone Level |
See page 24. |
|
|
|
|
|
|
Wireless Information |
See page 35. |
|
|
|
|
|
When using EPG |
Genre Colour |
See page 52. |
|
|
|
|
|
|
EPG Update/ |
See page 51. |
|
|
Cancel EPG Update |
|
|
|
|
|
|
When using Media |
Device Information |
See page 42. |
|
Player (Photo Multi |
|
|
|
View) |
|
|
|
|
|
|
|
When using Media |
PICTURE |
See page 27. |
|
Player (Photo Single |
|
|
|
Picture Size |
See page 25. |
||
View, Slide Show) |
|
|
|
|
Interval Time |
See page 41. |
|
|
|
|
|
|
Repeat |
See page 41. |
|
|
|
|
|
|
Sleep Timer |
See page 49. |
|
|
|
|
|
|
|
|
English |
Mode |
Quick menu item |
Description |
|
|
|
|
|||
Photo Frame |
PICTURE |
See page 27. |
|
|
|
Picture Size |
See page 25. |
|
|
|
|
|
|
|
Selecting positions
To select a position, use the numbered buttons on the remote control.
Positions can also be selected using PU and Pu.
To display on-screen information such as position, input mode or stereo/mono signal, press . Press again to cancel.
The Time Display – analogue only
The time display facility allows the current (text service) time to be seen on the television screen.
Press Dwhilst watching a normal television broadcast to see the time display from the broadcaster. It will remain on screen for about 5 seconds.
NOTE: This display may not be available in some cases.
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.
Stereo… Press sto select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press sto select Dual 1, Dual 2 or Mono.
For DTV programmes
For stereo or dual mono broadcasts, press sand use C or c to select settings.
Mode Display |
Pressing c |
Stereo |
Stereo S Left S Right |
|
|
Dual mono |
Dual 1 S Dual 2 S Dual |
|
|
Mono |
– |
|
|
Multichannel |
– |
|
|
For multi-audio track broadcasts, press srepeatedly to change the audio language (see ‘Audio language’ on page 54).
21
English
CONTROLS AND FEATURES
Sound controls
Volume controls and mute sound
Volume
Press y or Y to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
Sound Navi (XV/MV series only)
You can customize current sound mode settings. Select the appropriate mode in accordance with the installation location of the TV (Stand or Wall) and adjust the equalizer on-screen as desired.
a Select the SOUND menu.
b Press b to highlight Advanced Sound Settings, and then press Q.
Dual
If a programme or film is being broadcast with a soundtrack in more than one language, the DUAL feature allows selection between them.
a Press MENU and C or c to select the SOUND menu.
b Press b to highlight Dual, and then press C or c to choose between Dual 1 or Dual 2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SOUND |
|
|
|
|
|
|
|
|
||
|
Dual |
|
|
Dual 1 |
|
||||||
|
Balance |
0 |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||||
|
Advanced Sound Settings |
|
|
|
|
|
|
|
|
||
|
Dolby Volume |
|
|
Low |
|
||||||
|
Dynamic Range Control |
|
|
Off |
|
||||||
|
Audio Level Offset |
|
|
|
|
|
|
|
|
||
|
TV Speakers |
|
|
On |
|
||||||
|
Headphone Settings |
|
|
|
|
|
|
|
|
Balance, Bass and Treble
The sound controls are accessible in digital and analogue modes.
a Select the SOUND menu.
b Press b to highlight Balance, and then press C or c to emphasize left or right speaker balance.
For RV series only
c Press b to highlight Advanced Sound Settings, and then press Q.
c Press b to highlight Sound Navi, and then press Q.
Advanced Sound Settings |
|
Sound Navi |
|
Surround |
Off |
Voice Enhancement |
On |
Dynamic Bass Boost |
High |
d Press Cor cto select either Stand or Wall depending on how your TV is installed, and then press the RED button.
e Press Cor cto select the frequency range you want to adjust from the equalizer window, and then press Bor b to adjust the level.
Sound Navi |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
TV Mounting |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stand |
||||||
+20 |
|
|
|
|
|
|
|
|
Equalizer |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100 |
330 |
1K |
3.3K |
10K |
[Hz] |
||||||||||||||||
2 |
|
1 |
|
0 |
|
1 |
|
2 |
|
[Level] |
f Repeat step 5 for other frequencies.
d Press bto highlight Bass or Treble, and then press C or c to adjust the settings.
22