Español |
|
Français |
|
English |
32” LCD TV / DVD
LD320SS2
EN |
Owner's Manual |
Need help? |
Please call toll free or visit our web site below |
FR |
Manuel du Propriétaire Besoin d’aide? |
Appelez notre numéro gratuit ou visitez notre site web à l’adresse |
|
ES |
Manual del Propietario |
¿Necesita ayuda? |
Llame por favor sin costo ó visite nuestro sitio web en |
|
|
1-866-321-3927 |
|
|
|
|
|
www.sylvaniaconsumerelectronics.com
MODEL NUMBER |
|
SERIAL NUMBER |
© 2011 Funai Electric Co., Ltd. |
|
|||
|
2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
|
CAUTION |
|
|
|
an equilateral triangle, is intended to alert the |
|
|
|
|
|
The lightning flash with arrowhead symbol, within |
|
RISK OF ELECTRIC SHOCK |
|
|
|
user to the presence of uninsulated “dangerous |
|
|
|
|||
|
DO NOT OPEN |
|
|
|
voltage” within the apparatus’s enclosure that may |
|
|
|
|
|
be of sufficient magnitude to constitute a risk of |
CAUTION: |
|
|
electric shock to persons. |
||
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO |
|
|
The exclamation point within an equilateral triangle is |
||
NOT REMOVE COVER (OR BACK). NO USER |
|
|
intended to alert the user to the presence of important |
||
SERVICEABLE PARTS INSIDE. REFER SERVICING TO |
|
|
operating and maintenance (servicing) instructions in |
||
QUALIFIED SERVICE PERSONNEL. |
|
|
the literature accompanying the apparatus. |
||
The caution marking is located on the rear or bottom of the cabinet. |
|
Important Safety Instructions
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Wall Mount Bracket Kit
Recommended Wall Mount Bracket Kit:
Brand: SANUS |
Model #: San25b |
Recommended Screw dimension: M4 x 0.709” (18mm)
•The recommended Wall Mount Bracket Kit (sold separately) allows the mounting of theTV on the wall.
•For detailed information on installing the wall mount, refer to the Wall Mount Instruction Book.
•Funai is not responsible for any damage to the product or injury to yourself or others if you elect to install theTV Wall Mount Bracket or mount theTV onto the Bracket on your own.
•Wall Mount Bracket Kit is sold separately and is not supplied.
•The Wall Mount Bracket must be installed by experts.
Funai not liable for these types of accidents or injury noted below.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments / accessories specified by the manufacturer.
12.Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside theTV set. If screws too short are used this may cause theTV set to fall.
•Do not fasten the screws by excessive force; this may damage the product or cause the product to fall, leading to an injury.
•For safety reasons use 2 people to mount theTV onto a Wall Mounting Bracket.
•Do not mount theTV onto the Wall Mounting Bracket while yourTV is plugged in or turned on. It may result in an electrical shock injury.
When installing the unit on the wall, allow this much space.
Top: |
11.8 inches (30cm) |
Left and right side: |
5.9 inches (15cm) |
Bottom: |
3.9 inches (10cm) |
•Install the Wall Mount Bracket on a sturdy vertical wall.
•If installed onto a ceiling or slanted wall, theTV and Wall Mount Bracket may fall which could result in a severe injury.
English 3
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1)Reorient or relocate the receiving antenna.
2)Increase the separation between the apparatus and receiver.
3)Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4)Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY |
|
Trade Name: SYLVANIA |
Responsible Party: FUNAI CORPORATION, Inc. |
Model: LD320SS2 |
Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A. |
|
Telephone Number: 1-866-321-3927 |
This Class B digital apparatus complies with Canadian ICES-003. StandardTelevision Receiving Apparatus, Canada BETS-7/NTMR-7
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Disconnect the mains plug to shut off when find trouble or not in use.The mains plug shall remain readily operable.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam. LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
LAMP IN LCD CONTAINS MERCURY, DISPOSEACCORDINGTO LOCAL, STATE OR FEDERAL LAW.
4
NOTE ABOUT RECYCLING
•This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
WHEN CARRYING THIS UNIT
•At least 2 people are required when
carrying this unit.
•Make sure to hold the upper and bottom frames of the unit firmly as illustrated.
TO AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
•Do not handle the AC power cord with wet hands.
•Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
•Do not put your fingers or objects into the unit.
LOCATION AND HANDLING
•Do not install the unit in direct sunlight or in a place subject to dust or strong vibration.
•Avoid a place with drastic temperature changes.
•Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending
on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.
•Depending on the environment, the temperature of this unit may increase slightly.This is not a malfunction.
•Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit.
DEW CONDENSATION WARNING
•Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its inside gets dry.
-The unit is moved from a cold place to a warm place.
-Under conditions of high humidity.
-After heating a cold room.
Trademark Information
•HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
•Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
•ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
Consumer Notice:
This TV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home mode settings.
Changing or enabling other features in this TV (e.g. brightened backlighting) will possibly increase energy consumption beyond the original ENERGY STAR® qualified limits.
•is a trademark of DVD Format/Logo Licensing Corporation.
•The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
English 5
Child Safety
6
INTRODUCTION
Contents
Important Safety Instructions |
2 |
Trademark Information |
4 |
Child Safety |
5 |
INTRODUCTION
Features |
7 |
Symbols Used in this Manual |
7 |
Supplied Accessories |
8 |
Mounting the Unit on Your Furniture |
8 |
Attaching the Base |
8 |
Installing the Batteries |
8 |
Remote Control Function |
9 |
Control Panel |
10 |
Terminals |
11 |
Cable Management |
11 |
OPERATING DVD
Playable Media |
28 |
Unplayable Media |
28 |
Playback |
29 |
Disc Menu |
29 |
Resume Playback |
29 |
Paused and Step-by-step Playback |
29 |
Fast Forward / Fast Reverse |
29 |
Slow Forward / Slow Reverse |
30 |
Zoom |
30 |
Search Functions |
30 |
Repeat Playback |
31 |
Repeat A-B Playback |
31 |
Random Playback |
31 |
Programmed Playback |
31 |
On-screen Display |
32 |
Special Settings |
32 |
PREPARATION
Antenna Connection |
12 |
Connection to Cable Receiver or Satellite Box |
12 |
Plug In the AC Power Cord |
12 |
Initial Setup |
13 |
WATCHING TV
Sleep Timer |
14 |
Switching Each Input Mode |
14 |
Channel Selection |
14 |
Still Mode |
14 |
TV Screen Display Mode |
15 |
Sound Functions |
15 |
TV Screen Information |
16 |
USING FUNCTIONS
Picture |
18 |
Sound |
18 |
Channel |
19 |
Features |
20 |
Language |
24 |
DVD |
25 |
Language Code List |
27 |
CONNECTING DEVICES
External Device Connection |
34 |
USEFUL TIPS
Troubleshooting Guide |
36 |
FAQ |
38 |
INFORMATION
Glossary |
39 |
Maintenance |
39 |
General Specifications |
40 |
Electrical Specification |
40 |
Other Specifications |
40 |
Limited Warranty |
41 |
© 2011 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc., used under license.
Features
TV
•DTV /TV / CATV
You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels.
•Information Display (ATSC only)
You can display the title, contents and other information of the current DTV program on the TV screen.
•Autoprogram
This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.
•Child Lock
This feature allows you to block children’s access to inappropriate programs.
•Closed Caption Decoder
Built-in closed caption decoder displays text for closed caption supported programs.
•MTS / SAP Tuner
Audio can be selected from the remote control.
•Auto Standby
If there is no input signal and no operation for 15 minutes, the unit will go into standby mode automatically.
•Sleep Timer
You can set the unit to go into standby mode after a specific amount of time.
•Choices for On-screen Language
Select your on-screen language: English, Spanish or French.
•Stereo Sound Function
•PLL Frequency Synthesized Tuning
Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point “•” buttons on the remote control.
•Various Adjustment for Picture and Sound
Customizes image quality suitable for your room and sets your sound preference.
•fun-Link via HDMI Link (HDMI Cable not Included)
fun-Link allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV.
•HDMI Input
When using HDMI1 Input, you can enjoy this unit as a PC monitor if your PC has a DVI output terminal.
•Component Video Input
•S-Video Input
•AV Input
•Digital Audio Output
•Analog Audio output
DVD
•Dolby Digital Sound
Enjoy Dolby Digital multi-channel surround sound when you connect the unit to your Dolby Digital decoder.
•Still / Fast / Slow / Step Playback
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
•DVD Menus in a Desired Language
You can display DVD menus in a desired language, if available on
aDVD-video.
•Auto standby
If there is no operation for 20 minutes, the unit will go into standby mode automatically.
•Parental Lock
English
•Resume Playback
Lets you resume playback from the point at which playback was stopped.
•Bit Rate Indication
•DRC (dynamic range control)
You can control the range of sound volume.
Accessing from MODE button
During playback
•Subtitles in a Desired Language
You can select a desired language for displaying subtitle, if that language is available on a DVD-video.
•Selecting a Camera Angle
You can select the desired camera angle, if a DVD contains sequences recorded from different angles.
•Zoom
Allows you to enlarge the size of picture image.
•Black Level Adjustment
•Virtual Surround
•Search
chapter search / title search / track search / time search
•Marker
The part on the disc designated by user can be called back.
•Repeat
chapter / title / track / all /A-B
Accessing from MODE button
In stop mode
•Program Playback for audio CD
You can program the order of tracks to play them back in designated order.
•Random Playback for audio CD
This unit can shuffle the order of tracks to play them back in randomly.
Accessing from AUDIO button
During playback
•Choices for Audio Language and Stereo Sound Function
Select your desired languages or stereo sound function when different options are available on your disc.
Symbols Used in this Manual
The following is the description for the symbols used in this manual. Description refers to:
TV FUNCTIONS
ATSC : Digital TV operation
NTSC : Analog / Cable TV operation
•If neither symbol appears, the operation is applicable to both.
DVD FUNCTIONS
DVD : Playback of DVD-video
CD : Playback of audio CD
•If neither symbol appears under the function heading, operation is applicable to both.
7
INFORMATION TIPSUSEFUL DEVICES CONNECTING DVD OPERATING FUNCTIONS USING TV WATCHING PREPARATION INTRODUCTION
Block the viewing of a DVD-video unsuitable for children.
8
Supplied Accessories
Owner’s Manual |
Quick Start Guide Registration card |
|||
|
|
|
|
|
|
|
|
|
|
Quick
Start
Installation
Installation
Instalación
Remote Control (NF033UD) Batteries
(AA, 1.5V x 2)
AA
AA
TV base and 4 screws (M4 x 20)
Note
•If you lose the screws, please purchase M4×20 Phillips head screws at your local store.
•If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.
When using a universal remote control to operate this unit.
•Make sure the component code on your universal remote control is set to our brand. Refer to the manual accompanying your remote control for more details.
•We do not guarantee 100% interoperability with all universal remote controls.
Mounting the Unit on Your Furniture
Screw this unit on your furniture tightly using wood screws (not supplied) in the 2 holes at the back of the base as shown.
• Recommended screw dimension : 0.201 x 0.788 inches(5.1 x 20 mm) rear of this unit
screw holes
Note
•When you remove this unit make sure to unscrew the wood screws from your Wood Stand, Furniture and other wood item.
Attaching the Base
You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. At least 2 people are required for these steps.
1 Spread a thick and soft cloth over a table as shown at step 2. Place the main unit face down onto it. Make sure not to damage the screen.
2 Insert 2 hooks under the |
|
bottom of the main unit into |
|
base holes. (shown by arrow |
|
), then move the base in |
|
the direction as shown by |
arrow until it stops and the screw holes are aligned. Make sure not to put the AC power cord between the base and the unit.
3 Drive Phillips head screws into the 4 threaded holes at
the bottom of the base until they are tight.
To remove the base from this unit
•Unscrew the Phillips head screws in step 3.
After the screws are removed, move the base in the opposite direction as shown by arrow in step 2, then pull the base up toward the rear of the unit. Be careful not to drop the base when you remove it.
Note
•When attaching the base, ensure that all screws are tightly fastened. If the base is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.
•Make sure to use a table which can support the weight of this unit and is larger than this unit.
•Make sure the table is in a stable location.
•When attaching the base, ensure that FRONT ↑ written on the base is upward. If it’s not upward, the 2 hooks don’t fit in the base.
Installing the Batteries
Install the batteries (AA, 1.5V x 2) matching the polarity indicated inside battery compartment of the remote control.
Battery Precautions:
•Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
•Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old batteries with fresh ones.
•If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
•Do not try to recharge batteries; they can overheat and rupture.
Remote Control Function
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
17 |
||||||||||
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
18 |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
|
|
|
19 |
|||||||||||
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
|
|
|
|
|
|
|
|
20 |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
10 |
|
|
|
|
|
|
|
|
|
|
|
21 |
||||||||||||
|
|
|
|
|
|||||||||||||||||||||
|
11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
11 |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
13 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24 |
|
|
14 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
25 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
1 |
INPUT SELECT |
|
|
|
|
|
|
|
|
p.14 |
|||||||||||||||
2 |
POWER |
|
|
|
|
|
|
|
|
p.13 |
Press to turn the unit on and go into standby mode.To completely turn off the unit, you must unplug the AC power cord.
3 Number buttons |
p.14 |
- (hyphen) |
|
• Press to shift the subchannel from the main channel.
+10 button
• Press to select 10 or higher number of chapters.
4 |
SETUP |
p.17 |
5 |
ENTER |
p.13 |
6 |
▲/▼/◄/►(cursor) |
p.13 |
7 |
BACK |
p.16 |
8 |
CH RETURN |
p.14 |
|
Press to return to previously viewed channel. |
|
9 |
VOL. ▲/▼ |
p.15 |
10 |
MUTE |
p.15 |
11 |
SKIP H/ G |
p.30 |
|
Press to skip forward or backward chapters, titles (DVD) |
|
|
or tracks (CD). |
|
12 |
PAUSE F |
p.14, 29 |
|
TV mode |
|
|
• Press to pause screen image. |
|
DVD mode
|
|
|
|
English |
|
9 |
|
16 |
AUDIO |
|
|
|
|
||
p.7, 15, 32 |
INTRODUCTION |
||||||
13 |
DISC MENU |
p.29 |
|
||||
14 |
TITLE |
p.29 |
|
||||
15 |
A EJECT |
p.29 |
|
||||
|
Digital mode (DTV) |
|
|
|
|
||
|
|
|
|
|
|||
|
• Press to select the audio language. |
|
PREPARATION |
||||
|
Analog mode (TV) |
|
|
|
|||
|
|
|
|
|
|||
|
• Press to select the audio mode. |
|
|
|
|
||
|
DVD mode |
|
|
|
|
||
|
• Press to select the audio language (DVD), or sound |
|
|
||||
|
mode (CD). |
|
|
|
|
||
|
|
|
|
|
|||
17 |
SLEEP |
p.14 |
|
WATCHING |
|||
|
Press to select aspect ratio available for the TV screen. |
|
|||||
|
Press to activate the sleep timer. |
|
|
|
|
||
18 |
SCREEN MODE |
|
|
p.15 |
|
TV |
|
|
|
|
|||||
19 |
INFO |
p.16, 32 |
|
||||
|
|
||||||
|
Digital mode (DTV) |
|
|
|
|
||
|
|
|
|
|
|||
|
TV setting. |
|
|
|
USING |
||
|
• Press to display the channel information, signal type and |
|
FUNCTIONS |
||||
|
Analog mode (TV) |
|
|
|
|||
|
• Press to display the channel number, signal type and TV |
|
|
||||
|
setting. |
|
|
|
|
||
|
External input mode |
|
|
|
|
||
|
|
|
|
|
|||
|
• Press to display the external input mode, signal type |
|
|
||||
|
|
OPERATING |
|||||
|
and TV setting. |
|
|
|
|||
|
DVD mode |
|
|
|
|||
|
• Press to display the current status. |
|
|
||||
20 |
CH ▲/▼ |
p.14 |
|
DVD |
|||
21 |
REV E/ FWD D |
p.29, 30 |
|
||||
|
|
||||||
|
|
||||||
22 |
STOP C |
p.29 |
|
|
|||
|
CONNECTING |
||||||
23 |
PLAY B |
p.29 |
|
||||
|
|
||||||
24 |
CLEAR |
p.30, 31 |
|
|
|||
|
• Press to clear the numbers entered incorrectly. |
|
DEVICES |
||||
|
• Press to cancel the point A for A-B repeat. |
|
|||||
|
|
|
|||||
|
• Press to remove the track number in program input |
|
|
||||
|
(CD). |
|
|
|
|
||
|
|
|
|
|
|||
25 |
MODE |
p.7 |
|
USEFUL |
|||
|
randomly (CD). |
|
|
|
|||
|
• Press to arrange the playing order or playback |
|
|
||||
|
• Press to set the black level (DVD) and the virtual |
|
TIPS |
||||
|
surround on or off. |
|
|
|
|||
|
|
|
|
|
|||
|
• Press to change the camera angle to see the sequence |
|
|
||||
|
being played back from different angle (DVD). |
|
|
||||
|
|
|
|||||
|
• Press to search chapter, title (DVD), track (CD) or time. |
|
INFORMATION |
||||
|
• Press to set the marker. |
|
|
|
|||
|
|
|
|
|
|||
|
• Press to repeat playback chapter, title (DVD), track, disc |
|
|
||||
|
(CD) repeatedly or between designated point A and B. |
|
|
||||
|
• Press to magnify the part of picture (2x and 4x : DVD). |
|
|
||||
|
• Press to select the subtitles on the disc (DVD). |
|
|
• Press to pause the disc playback.
10
Control Panel
8
9
10
11
7 |
6 |
5 |
4 |
3 |
2 |
1 |
1 |
|
(power) |
p.13 |
|
Press to turn the unit on and go into standby mode.
To completely turn off the unit, you must unplug the AC power cord.
2 |
B (play) |
p.29 |
3 |
C (stop) |
p.29 |
4 |
A (eject) |
p.29 |
5 |
CH ▲/▼ |
p.14 |
|
Press to select channels or move up (▲) / down (▼) |
|
|
through the main menu items. |
|
6 |
SETUP |
p.17 |
7 |
VOL ▲/▼ |
p.15 |
Press to adjust the volume or move right (▲) / left (▼) through the main menu items.
8Infrared sensor window
Receives infrared rays transmitted from the remote control.
9POWER ON indicator
Lights up green when power is on.
10STAND BY indicator
Lights up red when the unit goes into standby mode.
11DVD indicator
Lights up orange when a disc is inserted.
|
|
|
|
English |
Terminals |
|
|
|
|
12 |
|
Side Panel |
p.29 |
|
|
|
12 |
Disc loading slot |
|
13 |
|
13 S-Video/Composite Video/Audio (L/R) Input jacks |
||
|
|
for VIDEO |
p.34, 35 |
|
|
|
14 |
HDMI 2 Input jack |
p.12, 34 |
|
|
Rear Panel |
|
|
14 |
|
15 |
AC power cord |
p.12 |
|
|
16 |
Cable management |
p.11 |
|
|
17 Component Video and Audio (L/R) Input jacks |
||
* |
15 |
|
|
p.12, 34 |
|
|
18 Analog Audio (L/R) Output jacks |
||
|
16 |
|
|
p.35 |
|
19 Analog Audio (L/R) Input jacks for HDMI 1 |
|||
|
|
|||
|
|
|
|
p.34, 35 |
|
17 |
|
Audio cable connection from a DVI device. |
|
|
|
When you connect your PC that has a DVI terminal, |
||
|
|
|
||
|
|
|
use a stereo mini plug conversion cable as well. |
|
22 |
|
|
(For HDMI 1 Input jack only) |
|
|
20 |
Digital Audio Output jack |
p.35 |
|
ANALOG |
18 |
|||
DVI |
|
|
|
|
AUDIO |
21 |
Antenna Input jack |
p.12 |
|
|
19 |
|||
|
22 |
HDMI 1 Input jack |
p.12, 34, 35 |
|
|
20 |
|||
|
|
HDMI connection for HDMI or DVI device. |
||
|
|
|
||
|
21 |
|
When you connect your PC that has a DVI terminal, |
|
|
|
|
you can enjoy this unit as a PC monitor. |
|
|
|
Note for service terminal |
|
|
|
|
* service terminal (service use only) |
|
|
|
|
• |
Use this terminal only when a software update is necessary. |
|
|
|
• |
User should not connect any devices to the service terminal such |
|
|
|
|
as digital camera, keyboard, mouse, etc. (because these will not |
|
|
|
|
work). |
|
• The software update is, in most cases, handled by an authorized service person or in some circumstances the user may be asked to do the software update themselves.
11
DEVICES CONNECTING DVD OPERATING FUNCTIONS USING TV WATCHING PREPARATION INTRODUCTION
Cable Management
Keep the cables through this holder to avoid tangling them.
INFORMATION TIPSUSEFUL
12
PREPARATION
No supplied cables are used with these connections:
• Please purchase the necessary cables at your local store.
Before you connect:
Be sure your antenna or other device is connected properly before plugging in the AC power cord.
Antenna Connection
Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.
VHF / UHF
analog or
DTV antenna
or
RF coaxial cable
cable TV signal
Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. [Initial Setup]
p.13
Note
•If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.
•Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.
•For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.
•If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than a set top or inside antenna.
•To switch your reception source easily between antenna and cable, install an antenna selector.
•If you are not receiving a signal from your cable service, contact the Cable provider.
Connection to Cable Receiver or Satellite Box
Use an HDMI or component video cables to connect the HDMI or the Component Video Input jacks of the unit to the HDMI or the component video output jacks of the cable receiver / satellite box.
If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside |
||||
the Component Video connector. |
||||
|
|
|
|
component video cables |
|
|
|
|
(red / blue / green) and audio cables |
(green) (blue) |
(red) |
|
|
|
COMPONENT VIDEO OUT |
AUDIO OUT |
HDMI OUT |
||
Y Pb/Cb |
Pr/Cr |
L |
R |
or
STEREO
PCM
cable receiver / satellite box
ANT IN
HDMI cable
or |
satellite dish
RF coaxial cable
or
cable TV signal including PPV
You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video output jacks because they might have different output jacks.
Required cables and connecting methods of the cable receiver/ satellite box, or the availability channel for the clear QAM may differ depending on the cable/satellite provider.
For more information, please contact your cable/satellite provider.
Note
•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the better compatibility.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made.
Caution:
•Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.
Note
•Each time you plug in the AC power cord, no operations will be performed for a few seconds.This is not a malfunction.
These operations are accessible by remote control. Some may also be accessible by controls on the main unit.
Initial Setup
This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels.
Before you begin:
Make sure the unit is connected to antenna or cable.
1 After making all the necessary connections, press POWER to turn on the unit.
•It may take a few moments to turn on the unit for the first time.
•[Initial Setup] menu appears automatically after the unit is turned on.
2 Use ▲/▼ to select the on-screen language from the choices (English/Español/Français) on the right side of the TV screen, then press ENTER.
3 Use ▲/▼ to select [Antenna] for TV channels or [Cable] for CATV channels, then press ENTER.
Initial Setup
Make sure the antenna is connected to ''ANT. IN'' jack. |
Antenna |
|||
Cable |
||||
Select your signal source. |
|
|
||
|
|
|
Skip |
|
Antenna |
|
|
|
|
Cable |
Or |
ANT.IN |
|
|
|
|
|
||
Select |
ENTER Enter |
Back |
Skip |
• [Autoprogram] will begin.
Initial Setup
Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete.
0%
Digital channels |
0 ch |
|
|
|
|||
|
|
|
|
|
|
|
|
Analog channels |
0 ch |
|
|
|
|
|
|
Skip
|
|
English |
|
|
13 |
|
|
|
|
|
|
4 Use ◄/► to select the desired location setting, then press |
INTRODUCTION |
||||
|
|||||
ENTER. |
|
||||
|
|
|
|
||
|
Initial Setup |
|
|||
|
|
|
|
|
|
Select “Retail” or “Home” for your location.
Select |
ENTER Enter |
PREPARATION |
Retail |
Home |
|
|
|
|
|
|
|
|
|
|
|
• Select [Retail] store, the unit will be set up with |
|
||||||
|
|
predefined setting for retail displays. In this setting, the |
WATCHING |
|||||
|
|
power consumption may possibly exceed the limited |
||||||
|
|
requirement of the ENERGY STAR® qualification. |
||||||
|
• Select [Home], the unit is set to maximize the energy |
|||||||
|
|
efficiency for home setting and it can be adjusted |
||||||
|
|
TV |
||||||
|
|
through a choice of picture and sound quality according |
||||||
|
|
to your preference. |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
• When the initial setup is completed, the lowest |
|
||||||
|
USING |
|||||||
|
|
memorized channel with the confirmation message of |
||||||
|
|
the location setting will be displayed on the TV screen. |
||||||
|
|
|
|
|
|
|
FUNCTIONS |
|
Note |
|
|
|
|
|
|||
• If you are not receiving a signal from your cable service, contact |
|
|||||||
|
the Cable provider. |
|
|
|
|
|
||
• If you press POWER or SETUP during autoprogram, this setting |
|
|||||||
|
|
|||||||
|
will be canceled. |
|
|
|
|
|
|
|
• |
The initial autoprogram function can be executed for either |
|
OPERATING |
|||||
|
[Antenna] or [Cable] only once.When you change the |
|
||||||
• |
connection (Antenna / Cable), set [Autoprogram] again. p.19 |
|
||||||
If there is no signal input from the antenna terminal and no |
|
|||||||
|
operation for several seconds after you turn on the unit, helpful |
|
||||||
|
|
DVD |
||||||
|
hints appears. Follow the instructions listed on the TV screen. |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
Initial Setup |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Retry |
|
|
CONNECTING |
|
|
No channel is registered. |
|
|
Later |
|
|
|
|
|
Try Autoprogram again? |
|
|
|
|
|
|
|
|
Verify that you have a cable connected to the “ANT. IN” jack |
|
|
|
|||
|
|
on the back of the TV, the channel installation process |
|
|
|
|
||
|
|
searches this connection. If you are using a cable or satellite |
|
|
|
|||
|
|
box, please confirm the input which you have connected to the |
|
|
|
DEVICES |
||
|
|
box and press “INPUT SELECT” key on the remote control to |
|
|
|
|||
|
|
select the appropriate source input. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Select |
ENTER Enter |
Skip |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
USEFUL |
|||
• You must set [Home] in step 4. Otherwise, [Picture] and [Sound] |
|
|||||||
|
settings you adjusted will not be memorized after the unit goes |
|
||||||
|
into standby mode. |
|
|
|
|
|
||
|
|
|
|
|
|
TIPS |
||
After an initial setup is completed |
|
|
|
|
||||
|
|
|
|
|
||||
|
• If you want to scan the channels automatically again. |
|
||||||
|
|
[Autoprogram] p.19 |
|
|
|
|
INFORMATION |
|
|
• You can add the desired cable and analog channels |
|||||||
|
|
|||||||
|
|
unmemorized by autoprogram. |
|
|
|
|
|
|
|
|
[Add Channels] p.20 |
|
|
|
|
|
|
|
• If you want to change to another language. |
|
||||||
|
|
[Language] p.24 |
|
|
|
|
|
|
|
• If you want to change the location setting. |
|
||||||
|
|
[Location] p.24 |
|
|
|
|
|
|