Sylvania LC320SLX Owner Manual

Español Français English

LC320SLX

Owner’s Manual

Guide d’utilisation

Manual del Usuario

NEED

HELP?

?

D’AIDE

BESOIN

AYUDA?

¿NECESITA

FREE!

!

PLEASE

CALL

TOLL

GRATUIT

NUMÉRO

NOTRE

SINCOSTO!

APPELEZ

POR

FAVOR

3927

¡LLAME

-

321

AT

-

866

-

SITE

1

OUR

WEB

L’ADRESSE

VISIT

À

OR

WEB

SITE

EN

NOTRE

WEB

VISITEZ

SITIO

OU

.com

NUESTRO

.sylvaniaconsumerelectronics

ÓVISITE

www

MODEL NUMBER

SERIAL NUMBER

HIGH-DEFINITION TELEVISION

TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.

POUR RECEVOIR LE SIGNAL NUMÉRIQUE /ANALOGIQUE, VOUS DEVEZ CONNECTER L’ANTENNE.

PARA RECIBIR LA SEÑAL DIGITAL/ ANALÓGICA, DEBE CONECTAR LA ANTENA.

© 2009 Funai Electric Co., Ltd.

The model and serial numbers of this unit may be found on the cabinet.	Model No.:	LC320SLX
You should record and retain those numbers for future reference.
	Serial No.:

Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

	CAUTION				The lightning flash with arrowhead symbol, within an
					equilateral triangle, is intended to alert the user to the
	RISK OF ELECTRIC SHOCK
					presence of uninsulated“dangerous voltage” within the
	DO NOT OPEN				apparatus’s enclosure that may be of sufficient magnitude
					to constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
					The exclamation point within an equilateral triangle is
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER					intended to alert the user to the presence of important
SERVICEABLE PARTS INSIDE. REFER SERVICING TO					operating and maintenance (servicing) instructions in
QUALIFIED SERVICE PERSONNEL.					the literature accompanying the apparatus.

The caution marking is located on the rear or bottom of the cabinet.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the apparatus and receiver.

3)Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY
Trade Name:	SYLVANIA	Responsible Party:	FUNAI CORPORATION, INC.
Model:	LC320SLX	Address:	201 Route 17 North Suite No. 903 Rutherford, New Jersey 07070 U.S.A.
		Telephone Number:	201-727-4560

This Class B digital apparatus complies with Canadian ICES-003.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

2

EN

Español Français English

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 3.2 inches (8cm) or more around this apparatus.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

•Do not handle the AC power cord with wet hands.

•Do not remove this unit’s cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.

•Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.

•Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

•The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface.

•Do not install the unit near or over a radiator or heat register.

•Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

•Avoid a place with drastic temperature changes.

•Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

•Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

NOTE ABOUT RECYCLING

• This unit’s packaging materials are recyclable and can be reused.

Please dispose of any materials in accordance with your local recycling regulations.

•Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

WHEN CARRYING THIS UNIT

•At least two people are required when carrying this unit.

•Make sure to hold the upper and bottom frames of the unit firmly as illustrated.

Trademark Information

•HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

•Manufactured under license from Dolby Laboratories.“Dolby”and the double-D symbol are trademarks of Dolby Laboratories.

•Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

3

EN

INTRODUCTION

Supplied Accessories

owner’s manual							quick start guide	remote control	registration card	screw kit for attaching
(1EMN24299A)							(1EMN24639)	(NH000UD)	(1EMN24700)	the stand
										(1ESA19881)

batteries (AAA x 2)

AAA

AAA

•If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.

Attaching the Stand

You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper direction.

1Spread a thick and soft cloth over a table as shown below.

Place the main unit face down onto it. Make sure not to damage the screen. At least two people are required at this step.

2Align the 2 stand hooks with the two hooks under the bottom of the main unit (shown by arrow ), then slide the stand in the direction as shown by arrow until it stops and the 4 mounting holes are aligned.

Make sure not to put the AC power cord between the stand and the unit.

3Drive Phillips pan screws in the 4 threaded holes at the bottom of the stand until they are tight.

screw holes

front

side

To remove the stand from this unit

Unscrew the Phillips pan screws indicated by above “ ” screw holes. After the screws are removed pull the stand up toward the rear of the unit. Be careful not to drop the stand when you remove it.

Note:

•When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.

•Make sure to use a table which can support the weight of this unit and is larger than this unit.

•Make sure the table is in a stable location.

Symbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

TV : Analog TV operation DTV : Digital TV operation

• If neither symbol appears under the function heading, operation is applicable to both.

4

EN

Español Français English

Features

•DTV/TV/CATV

-You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels.

•Information Display (DTV only)

-You can display the title, contents and other information of the current DTV program on the TV screen.

•Autoscan

-This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.

•Child Lock

-This feature allows you to block children’s access to inappropriate programs.

•Closed Caption Decoder

-Built-in closed caption decoder displays text for closed caption supported programs.

•MTS/SAP Tuner

-Audio can be selected from the remote control.

•Auto Shut Off Function

-If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn off automatically.

•Sleep Timer

-This feature will automatically turn off the power of the unit at a specific time.

•Choices for On-screen Language

-Select your on-screen language: English, Spanish or French.

•Stereo Sound Function

•PLL Frequency Synthesized Tuning

-Provides free and easy channel selection and lets you tune directly to any channel using the number buttons on the remote control.

•Various Adjustment for Picture and Sound

-Customizes image quality to suitable for your room and sets the sound as your preference.

•HDMI Input

-When using HDMI1 Input, you can enjoy this unit as a PC monitor if your PC has DVI output terminal.

•Component Video Input

•S-Video Input

•AV Input

•Digital audio Output

•Analog audio Output

© 2009 Funai Electric Co., Ltd.

Contents

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

INTRODUCTION

Supplied Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Attaching the Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PREPARATION

Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connection to Cable Receiver or Satellite Box . . . . . . . . . . . 8 External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Plug the AC Power Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

WATCHING TV

Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Volume Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Switching Each Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Switching Audio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 TV Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 TV Screen Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

OPTIONAL SETTING

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Autoscan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Channel List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Manual Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Antenna Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Child Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 PC Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Current Software Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

TROUBLESHOOTING

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

INFORMATION

Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . .37 General Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Other Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

INFORMATION TROUBLESHOOTING SETTING OPTIONAL TV WATCHING PREPARATION INTRODUCTION

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai.

Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

	with the	design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written
consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this
manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein.
Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property			5
rights to the fullest extent of the law.

EN

INTRODUCTION

Control Panel

1. y (power) (p. 13)

Press to turn the unit on and off.

2. CH K/L (p. 14 / p. 15)

Press to select channels or move up (K) / down (L) through the main menu items.

3. SETUP (p. 13)

Press to display the main menu. 4. VOL X/Y (p. 14)

Press to adjust the volume or move right (X) / left (Y) through the main menu items.

5. Infrared sensor window

			5		Receives infrared rays transmitted from the remote
			6		control.
			7	6.	POWER ON indicator
					Lights up green when power is on.
VOL	SETUP	CH		7.	STAND BY indicator
					Lights up red when power is off.
4	3	2	1

Terminals

8

9

10

11

*	12
	13
	14

19

20

15

16 17

18

Note:

*service terminal (service use only)

•Use this terminal only when a software update is necessary.

•User should not connect any devices to the service terminal such as digital camera, keyboard, mouse, etc. (because these will not work).

•The software update is, in most cases, handled by an authorized service person or in some circumstances the user may be asked to do the software upgrade themselves.

6

[Side Panel]

8.S-Video Input jack (p. 10)

S-Video cable connection from an external device.

9.Video Input jack (p. 11)

RCA video cable connection from an external device.

10.Audio Input jack (p. 10 / p. 11)

RCA audio cable connection from an external device.

11.HDMI 2 Input jack (p. 8 / p. 9) HDMI connection from HDMI device.

[Rear Panel]

12.AC power cord (p. 12)

Connect to a standard AC outlet to supply power to this unit.

13.Cable management (p. 12)

Use this holder to bundle the cables.

14.Component video and Audio Input jack (p. 8 / p. 10) RCA component video cable and RCA audio cable connection from an external device.

15.Audio Output jack (p. 11)

RCA audio cable connection for an external device.

16.Audio Input jack for HDMI1 (p. 9 / p. 12)

RCA audio cable connection from a DVI device. When you connect your PC that has a DVI terminal, use a stereo mini plug-RCA conversion cable as well. (For HDMI 1 Input jack only)

17.Digital audio Output jack (p. 11)

Coaxial digital cable connection for a decoder or an audio receiver.

18.Antenna Input jack (p. 8)

RF coaxial cable connection for your antenna or cable TV signal.

19.HDMI 1 Input jack (p. 8 / p. 9 / p. 12) HDMI connection for HDMI or DVI device.

When you connect your PC that has a DVI terminal, you can enjoy this unit as a PC monitor.

20.HDMI 3 Input jack (p. 8 / p. 9) HDMI connection from HDMI device.

EN

Remote Control Function

1											9
										10
2
3										11
4										12
5
6					13
7											14
					15

8

16

1.STILL (p. 15)

Press to pause screen image.

2.INPUT SELECT (p. 15)

Press to access connected external devices like a BD/DVD recorder.

3.SETUP (p. 13)

Press to display the main menu.

4.s / B / K / L (cursor) (p. 13)

Press to move left / right / up / down through the items.

5.BACK (p. 16)

Press to return to the previous menu operation.

6.CH RETURN (p. 14)

Press to return to previously viewed channel.

	Español					Français	English
7.	VOL. X/ Y (p. 14)									INTRODUCTION
	Press to adjust the volume.
8.	Number buttons (p. 14)									PREPARATION
	• Press to select channels.
	- (hyphen)
	• Press to shift the subchannel from the main channel.
9.	POWER (p. 13)
	Press to turn the unit on and off.
10.	AUDIO (p. 15)
	Digital mode (DTV)
	• Press to select the audio language.									WATCHING
	Analog mode (TV)
	• Press to select the audio mode.
11.	SCREEN MODE				(p. 17)
	Press to select aspect ratio available for the TV screen.									TV
12.	INFO (p. 16)
	•Digital mode (DTV)
	Press to display the channel information, signal type
										OPTIONAL
	Press to display the channel number, signal type and
	and TV setting.
	•Analog mode (TV)
	TV setting.									SETTING
	•External input mode
	Press to display the external input mode, signal type
	and TV setting.
13.	Press to turn the sound on and off.									TROUBLESHOOTING
	ENTER (p. 13)
	Press to decide the command of setting when the
	main menu is displayed.
14.	CH K/ L (p. 15)
	Press to select channels and the external input mode.
15.	MUTE (p. 14)
16.	SLEEP (p. 14)
	Press to activate the sleep timer.									INFORMATION
When using a universal remote control to operate
this unit.
	• Make sure the component code on your universal remote
	control is set to our brand.
	Refer to the manual accompanying your remote control for
	more details.
	• We do not guarantee 100% interoperability with all universal
	remote controls.

Installing the Batteries

Install the batteries (AAA x 2) matching the polarity indicated inside battery compartment of the remote control.

Battery Precautions:

•Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

•Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old batteries with fresh ones.

•If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

•Do not try to recharge batteries; they can overheat and rupture.

7

EN

PREPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

Before you connect...

Be sure your antenna or other device is connected properly before plugging in the AC power cord.

Antenna Connection

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

rear of this unit

e.g.)

VHF / UHF antenna

RF coaxial cable

or

cable TV signal

*Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. Refer to “Initial Setup” on page 13.

Note:

•If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

•Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.

•For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

•If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than settop versions.

•To switch your reception source easily between antenna and cable, install an antenna selector.

•If you connect to the cable system directly, contact the CATV installer.

Connection to Cable Receiver or Satellite Box

Use an HDMI or an RCA component video cable to connect the HDMI or the Component video Input jack of the unit to the HDMI or the component video output jack of the cable receiver / satellite box.

If you connect to the unit’s Component video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component video connector.

e.g.)	HDMI OUT			HDMI cable
satellite dish	or
					or
	AUDIO OUT		COMPONENT VIDEO OUT
	L	R	Y	Pb/Cb Pr/Cr

ANT IN

or

cable TV signal including PPV

RF coaxial		(blue)	(red)	(green)
cable	(green)
				(blue)
				(red)
			or
	STEREO
	PCM
	cable receiver / satellite box
				RCA component video cable
				and RCA audio cable

side or

rear of this unit

*You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video output jack because they might have different output jacks.

*Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable / satellite provider.

8

EN

Español Français

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

English

INTRODUCTION

External Device Connection

[HDMI Connection]

HDMI connection offers the highest picture quality.

HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable.

e.g.)

HDMI cable

HDMI OUT

TITLE 5

CHAPTER 15

REPEAT A-B

	BD/DVD recorder
		or
	with the HDMI output jack

side or

rear of this unit

or

Note:

•This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.

•This unit accepts only 2 channel audio signal (LPCM).

•You need to select “PCM” for the digital audio of the device you connected or check the HDMI audio setting. There may be no audio output if you select “Bitstream”, etc.

•This unit only accepts signals in compliance with EIA861.

[HDMI-DVI Connection]

Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.

e.g.)

	HDMI-DVI	rear of this unit
DVI OUT	conversion cable

INFORMATION TROUBLESHOOTING SETTING OPTIONAL TV WATCHING PREPARATION

STEREO

PCM

cable receiver or satellite box with the DVI output jack

AUDIO OUT L R

To HDMI1 input jack only

RCA audio cable

Note:

•This unit accepts 480i / 480p / 720p / 1080i video signals.

•HDMI-DVI connection requires separate RCA audio connections as well.

•Audio signals are converted from digital to analog for this connection.

•DVI does not display 480i image that is not in compliance with EIA/CEA-861/861B.

9

EN

PREPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[Component video Connection]

RCA component video connection offers better picture quality for video devices connected to the unit.

If you connect to the unit’s Component video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component video connector.

e.g.)

TITLE	5
CHAPTER 15
REPEAT A-B

BD/DVD recorder with

the component video output jack

	RCA component video cable
			rear of this unit
(green)	(blue)	(red)	(green)
			(blue)
Y	Pb/Cb	Pr/Cr	(red)
COMPONENT VIDEO OUT
AUDIO OUT
L	R

RCA audio cable

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

[S-Video Connection]

S-Video connection offers good picture quality for video devices connected to the unit.

If you connect to the unit’s S-Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector.

e.g.)

TITLE	5
CHAPTER 15
REPEAT A-B

BD/DVD recorder with the S-Video output jack

	AUDIO OUT					S-VIDEO
	L		R				OUT

side of this unit

S-Video cable

RCA audio cable

Note:

• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.

10

EN

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

Español	Français	English
		INTRODUCTION

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit.

If you connect to the unit’s Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector.

When the audio jack of the video device is monaural, connect an RCA audio cable to the Audio L Input jack.

e.g.)

camcorder

video game

STAND-BY

STEREO

VCR

	AUDIO OUT					VIDEO
	L		R				OUT

side of this unit

RCA video cable

RCA audio cable

Note:

• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.

[Audio Output Connection]

Digital (for digital broadcasting only)

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound.

Use a digital audio coaxial cable to connect the unit to external digital audio devices.

Analog (for both analog and digital broadcasting)

If you connect this unit to an external analog audio device, you can enjoy stereo (2-channel) audio. Use an RCA audio cable to connect the unit to external analog audio devices.

INFORMATION TROUBLESHOOTING SETTING OPTIONAL TV WATCHING PREPARATION

e.g.)

stereo system

Dolby Digital

decoder

	AUDIO IN
L	R

		RCA audio cable
	or

DIGITAL AUDIO	rear of this unit
COAXIAL IN

digital audio coaxial cable

11

EN

rear of this unit

PREPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[PC Connection]

This unit can be connected to your PC that has a DVI terminal.

Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug-RCA conversion cable as well. If you connect this unit to your PC, you can use this unit as a PC monitor.

e.g.)

stereo mini plug-RCA	rear of this unit
conversion cable	To HDMI1
	input jack only

	HDMI-DVI
DVI OUT	conversion cable

personal computer

HDMI-DVI conversion cable should be with ferrite core.

The following signals can be displayed:

Format	Resolution	Refresh rate			Format	Resolution	Refresh rate
VGA	640 x 480	60Hz
						1,280 x 768	60Hz
SVGA	800 x 600	60Hz			WXGA
						1,360 x 768	60Hz
XGA	1,024 x 768	60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

•Please purchase the HDMI-DVI conversion cable that has a ferrite core.

•The following operations may reduce noise.

-Attach a ferrite core to the AC power cord of your PC.

-Unplug the AC power cord and use the built-in battery of your PC.

Cable Management

Plug In the AC Power Cord

Keep the cables through this holder to avoid tangle them.

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are

completed. rear of this unit

AC power cord

AC outlet

Caution:

• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).

Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plugged in the AC power cord, any operations will

not be performed for a few seconds. This is not a malfunction.

12

EN