Sunbeam 4220, 4219, 4216, 4215 User Manual

0 (0)
Sunbeam 4220, 4219, 4216, 4215 User Manual

Instruction Manual Steam Master® Irons

Manual de Instrucciones Planchas Steam Master®

MODEL S/ MODELOS

4211, 4212, 4213, 4214, 4215, 4216, 4219, 4220

www.sunbeam.com

P.N. 113165-004

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

READ ALL INSTRUCTIONS BEFORE USE

Use iron only for its intended use.

To protect against risk of electric shock, do not immerse the iron in water or other liquids.

The fabric select dial and steam lever should always be turned to “O/Off” before plugging or unplugging from out let. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.

Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.

Always disconnect iron from electrical outlet when filling with water or emptying and when not in use.

Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Take it to an authorized service center for examination and/or repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.

Close supervision is necessary for any appliance being used by or near children.

Do not leave iron unattended while plugged in or turned on or on an ironing board.

Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir.

If the iron is not operating normally, disconnect from the power supply and have the iron serviced by an authorized service center. Or call Customer Service at 800-458-8407.

Your SUNBEAM® iron is designed to rest on the heel rest. Do not leave the iron unattended. Do not set the iron on an unprotected surface, even if it is on its heel rest.

SPECIAL INSTRUCTIONS

This is a 1200-Watt appliance. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.

If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the extension cord so that it cannot be pulled or tripped over.

FOR PRODUCTS PURCHASED IN THE UNITED STATES AND CANADA

To reduce the risk of electrical shock, this appliance has a polarized plug (one blade is wider than the other). This plug fits a polarized outlet only one way; if the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

SAVE THESE INSTRUCTIONS

IRONING GUIDE

 

SUGGESTED

FABRIC SELECT

 

FABRIC

STEAM SETTING

DIAL SETTING

IRONING RECOMMENDATIONS

 

 

 

 

Acrylic

O/Off (Dry)

Synthetic

Iron garment inside out

 

 

 

 

Acetate

O/Off (Dry)

Synthetic

Iron garment inside out while still damp.

 

 

 

 

Polyester

O/Off (Dry)

Synthetic

Iron garment inside out while still damp.

 

 

 

 

Rayon

O/Off (Dry)

Synthetic

Iron garment inside out.

 

 

 

 

Silk

O/Off (Dry)

Silk

Iron garment inside out. Use an ironing cloth*

 

 

 

to prevent shine marks.

 

 

 

 

Viscose

O/Off (Dry)

Silk

Mainly dry iron; steam may be used under

 

 

 

garment manufacturer’s instructions.

 

 

 

 

Nylon

O/Off (Dry)

Silk

Iron garment inside out while still damp.

 

 

 

 

Wool

Steam

Wool

Iron garment inside out or use an

 

 

 

ironing cloth.*

 

 

 

 

Wool Blends

Steam

Wool

Iron garment inside out or use an

 

 

 

ironing cloth.*

 

 

 

 

Cotton Blends

Steam

Cotton

Follow garment manufacturer’s instructions.

 

 

 

Use setting for the fiber requiring the lowest

 

 

 

setting.

 

 

 

 

Corduroy

Steam

Cotton

Iron garment inside out or use an ironing cloth*

 

 

 

and then brush the garment with your hand

 

 

 

to raise the texture of the fabric.

 

 

 

 

Cotton

Steam

Cotton

Iron dark fabrics inside out to prevent

 

 

 

shine marks.

 

 

 

 

Linen

Steam

Linen

Iron garment inside out or use an

 

 

 

ironing cloth* to prevent shine marks

 

 

 

(especially on dark fabrics).

 

 

 

 

Denim

Steam

Linen

Use the SPRAY MIST® feature and/or the

 

 

 

SHOT OF STEAM® for deeper penetration

 

 

 

to remove wrinkles.

 

 

 

 

 

 

 

 

*An ironing cloth is a cotton, dry-cleaned cloth that you place over the garment you are ironing to prevent the fabric from looking shiny.

Note: Some fabrics may require more steam than others. Your iron has the capability to adjust steam as needed.

Loading...
+ 7 hidden pages