Sony DCR-TRV103, DCR-TRV110, DCR-TRV110E, DCR-TRV110P, DCR-TRV203 Service manual

...

DCR-TRV103/TRV110/TRV110E/TRV110P/TRV203/TRV210/

TRV210E/TRV310/TRV310E/TRV310P/TRV315

DCR-TR7000/TR7000E/TR7100E

RMT-814

SERVICE MANUAL

Ver 1.2 1999. 12

With SUPPLEMENT-1 (9-974-147-82) With SUPPLEMENT-2 (9-974-147-83)

Photo: DCR-TRV310E

B800 MECHANISM

NTSC MODEL : DCR-TRV103/TRV110/TRV110P/TRV203/TRV210/

TRV310/TRV310P/TRV315/TR7000

PAL MODEL : DCR-TRV110E/TRV210E/TRV310E/TR7000E/TR7100E

SPECIFICATIONS

Video camera recorder

System

Video recording system

2 rotary heads Helical scanning system

Audio recording system

Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo)

Video signal

DCR-TRV103/TRV110/TRV110P/ TRV203/TRV210/TRV310/ TRV310P/TR NTSC color, EIA standards TRV110E/TRV210E/TRV310E/ TR7000E/TR7100E: PAL color , CCIR standards

Recommended cassette

Hi8 video cassette

Recording/playback time

DCR-TRV103/TRV110/TRV110P/ TRV203/TRV210/TRV310/TRV310P/ TRV315/TR7000: (using 120 min.

cassette)

1 hours DCR-TRV110E/TRV210E/TRV310E/ TR7000E/TR7100E:

cassette)

1 hours Fastforward/rewind time DCRTRV103/TRV110/TRV110P/TRV203/ TRV210/TRV310/TRV310P/TRV315/ TR7000: (using 120 min. cassette) DCR-TRV110E/TRV210E/TRV310E/ TR7000E/TR7100E:

cassette)

Approx. 8 min.

V315/TR7000:

(using 90 min.

Image device

1/4 inch CCD (Charge Coupled Device) DCR-TRV103/TRV110/TRV110P/ TRV203/TRV210/TRV310/ TRV310P/TRV315/TR7000: Approx. 460,000 pixels (Effective: Approx. 290,000 pixels) DCR-TRV1 10E/TR V210E/ TRV310E/TR7000E/TR7100E: Approx. 800,000 pixels (Effective: Approx. 400,000 pixels)

Viewfinder

Electronic viewfinder DCR-TRV315/TR7000/TR7000E/ TR7100E: Monochrome DCR-TRV103/TRV110/TRV110E/ TRV110P/TRV203/TRV210/ TRV210E/TRV310/TRV310E/ TRV310P: Color

Lens

Combined power zoom lens Filter diameter 1 7/16 in. (37 mm) 20× (Optical), DCR-TRV103/TRV110/TRV110E: EE, NE, RU/TRV110P/TRV203/ TRV210/TRV210E: CN/TRV310/ TRV310E/TRV310P: E, HK, AUS, CN, JE/TRV315/TR7000: 360× (Digital) DCR-TRV110E: AEP, UK/TRV210E: AEP, UK/TRV310E: AEP, UK/ TR7000E/TR7100E: 80× (Digital)

Focal length

5/32 - 2 7/8 in. (3.6 - 72 mm) When converted to a 35 mm still camera 1 5/8 - 32 3/8 in. (41 - 820 mm)

Color temperature

Auto

Minimum illumination

DCR-TRV103/TRV110/TRV110P/ TRV203/TRV210/TRV310/ TRV310P/TRV315/TR7000:

1.0 lux (F 1.4) DCR-TRV110E/TRV210E/ TRV310E/TR7000E/TR7100E: 3 lux (F 1.4) 0 lux (in the NightShot mode)* * Objects unable to be seen due to

the dark can be shot with infrared lighting

Input and output connectors

DCR-TRV103/TRV110/TRV110E: E, HK, AUS, CN, JE/TRV110P/TRV203/ TRV210/TRV210E: CN/TRV310/ TRV310E: E, HK, AUS, CN, JE/ TRV310P/TRV315/TR7000:

S video input/output

DCR-TRV110E: AEP, UK, EE, NE, RU/TRV210E: AEP, UK/TRV310E: AEP, UK/TR7000E/TR7100E:

S video output

4-pin mini DIN Luminance signal: 1 Vp-p, 75 ohms, unbalanced

DIGITAL VIDEO CAMERA RECORDER

DCR-TRV103/TRV110/TRV210/TRV310/TRV315/TR7000 DCR-TRV103/TRV110/TRV203/TRV210/TRV315/TR7000

Canadian Model

DCR-TRV110/TRV110E/TRV110P/

TRV310/TRV310E/TRV310P

US Model

E Model

Hong Kong Model

DCR-TRV110/TRV110E/TRV310/TRV310E

DCR-TRV110E/TRV210E/TRV310E/

DCR-TRV110E/TRV210E/TRV310E/TR7000E

DCR-TRV110E/TRV310/TRV310E

DCR-TRV110E/TRV210E/TRV310E

AEP Model

TR7000E/TR7100E

UK Model

Tourist Model

Australian Model

DCR-TRV110E/TRV310E

Brazilian Model

DCR-TRV110

Chinese Model

East European Model

North European Model

Russian Model

DCR-TRV110E

Taiwan Model

DCR-TRV310

For MECHANISM ADJUSTMENT, refer to the “8mm Video MECHANICAL ADJUSTMENT MANUAL

DCR-TRV103/TRV110/TRV110P/ TRV203/TRV210/TRV310/ TRV310P/TRV315/TR7000: Chrominance signal: 0.286 Vp-p, DCR-TRV110E/TRV210E/ TRV310E/TR7000E/TR7100E: Chrominance signal: 0.3 Vp-p 75 ohms, unbalanced DCR-TRV103/TRV110/TRV110E: E, HK, AUS, CN, JE/TRV110P/TRV203/ TRV210/TRV210E: CN/TRV310/ TRV310E: E, HK, AUS, CN, JE/ TRV310P/TRV315/TR7000:

Video input/output

DCR-TRV110E: AEP, UK, EE, NE, RU/TRV210E: AEP, UK/TRV310E: AEP, UK/TR7000E/TR7100E:

Video output

Phono jack, 1 Vp-p, 75 ohms, unbalanced DCR-TRV103/TRV110/TRV110E: E, HK, AUS, CN, JE/TRV110P/TRV203/ TRV210/TRV210E: CN/TRV310/ TRV310E: E, HK, AUS, CN, JE/ TRV310P/TRV315/TR7000:

Audio input/output

DCR-TRV110E: AEP, UK, EE, NE, RU/TRV210E: AEP, UK/TRV310E: AEP, UK/TR7000E/TR7100E:

Audio output

Phono jacks (2: stereo L and R) 327 mV, (at output impedance 47 kilohms) impedance less than

2.2 kilohms

RFU DC OUT

Special minijack, DC 5V

” (9-973-801-11).

MICROFILM

DCR-TRV103/TRV110/TRV110E: E, HK, AUS, CN, JE/TRV110P/TRV203/ TRV210/TRV210E: CN/TRV310/ TRV310E: E, HK, AUS, CN, JE/ TRV310P/TRV315/TR7000:

DV input/output

DCR-TRV110E: AEP, UK, EE, NE, RU/TRV210E: AEP, UK/TRV310E: AEP, UK/TR7000E/TR7100E:

DV output

4-pin connector

Headphone jack

Stereo minijack (ø 3.5 mm)

LANC control jack

Stereo mini-minijack (ø 2.5 mm)

MIC jack

Minijack, 0.388 mV low impedance with 2.5 to 3.0 V DC, output impedance 6.8 kilohms (ø 3.5 mm) Stereo type

LCD screen

Picture

DCR-TRV103/TRV110/TRV110E/ TRV110P:

2.5 inches measured diagonally 2 × 1 1/2 in. (50.3 × 37.4 mm) DCR-TRV203/TRV210/TRV210E/ TRV315: 3 inches measured diagonally 2 3/8 × 1 3/4 in. (59.5 × 43.2 mm) DCR-TRV310/TRV310E/TRV310P:

3.5 inches measured diagonally 2 7/8 × 2 in. (72.4 × 50.4 mm)

Total dot number

DCR-TRV103/TRV110/TRV110E/ TRV110P: 61,380 (279 × 220) DCR-TRV203/TRV210/TRV210E/ TRV315: 89,622 (383 × 234) DCR-TRV310/TRV310E/TRV310P: 105,380 (479 × 220)

General

Power requirements

7.2 V (battery pack)

8.4 V (AC power adaptor)

Average power consumption (when using the battery pack)

During camera recording using LCD DCR-TRV103/TRV110/TRV110P:

3.5 W DCR-TRV110E: 3.6 W DCR-TRV203/TRV210/TRV210E/ TRV315: 3.9 W DCR-TRV310/TRV310E/TRV310P:

4.2 W

Viewfinder DCR-TRV110E/TRV203/TRV210/ TRV210E/TRV310/TRV310E/ TRV310P: 3.2 W DCR-TRV103/TRV110/TRV110P/ TRV315: 3.1 W During camera recording DCR-TR7000/TR7000E/TR7100E:

3.1 W

Operating temperature

32 °F to 104 °F (0 °C to 40 °C)

Storage temperature

–4 °F to +140 °F (–20 °C to +60 °C)

Dimensions (Approx.)

DCR-TRV103/TRV110/TRV110E/ TRV110P: 4 × 4 1/4 × 8 5/8 in. (101 × 107 × 217 mm) (w/h/d) DCR-TRV203/TRV210/TRV210E/ TRV310/TRV310E: 4 3/8 × 4 1/4 × 8 5/8 in. (108 × 107 × 217 mm) (w/h/d) DCR-TRV315: 4 3/8 × 4 1/4 × 7 3/4 in. (108 × 106 × 195 mm) (w/h/d) DCR-TR7000/TR7000E/TR7100E: 4 × 4 1/4 × 7 3/4 in. (101 × 106 × 195 mm) (w/h/d)

Mass (approx.)

DCR-TRV103/TRV110/TRV110E/ TRV110P: 1 lb 15 oz (890 g) DCR-TRV203/TRV210/TRV210E/ TRV315: 2 lb (930 g) DCR-TRV310/TRV310E: 2 lb 1 oz (960 g) DCR-TR7000/TR7000E/TR7100E: 1 lb 11 oz (790 g) excluding the battery pack, lithium battery, cassette and shoulder strap DCR-TRV203/TRV210/TRV210E/ TRV310/TRV310E/TRV310P/ TRV315: 2 lb 6 oz (1.1 kg) DCR-TRV103/TRV110/TRV110E/ TRV110P: 2 lb 3 oz (1 kg) DCR-TR7000/TR7000E/TR7100E: 1 lb 11 oz (790 g) including the battery pack NP-F330, lithium battery CR2025, 120 min. cassette (DCR-TRV103/TRV110/TRV110P/ TRV203/TRV210/TRV310/ TRV310P/TRV315/TR7000), 90 min. cassette (DCR-TRV110E/TRV210E/ TRV310E/TR7000E/TR7100E) and shoulder strap

Supplied accessories

See page 3.

AC power adaptor

Power requirements

100 - 240 V AC, 50/60 Hz

Power consumption

23 W

Output voltage

DC OUT: 8.4 V, 1.5 A in operating mode

Operating temperature

32 °F to 104 °F (0 °C to 40 °C)

Storage temperature

–4 °F to +140 °F (–20 °C to +60 °C)

Dimensions (approx.)

5 × 1 9/16 × 2 1/2 in. (125 × 39 × 62 mm) (w/h/d) excluding projecting parts

Mass (approx.)

9.8 oz (280 g) excluding power cord

Cord length (approx.)

AC power cord: 6.6 feet (2 m) Connecting cord: 5.2 feet (1.6 m)

Design and specifications are subject to change without notice.

• Abbreviation EE : East European model NE : North European model RU : Russian model HK : Hong Kong model AUS : Australian model CN : Chinese model JE : Tourist model

— 2 —

Supplied accessories

1 Wireless Remote Commander (1) 2 AC-L10A/L10B/L10C AC power

adaptor (1), Power cord (1)

3 NP-F330 Battery pack (1) 4 CR2025 Lithium Battery (1)

The lithium battery is already installed in your camcorder.

5 Size AA (R6) battery for Remote

Commander (2)

6 A/V connecting cable (1)

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY .

7 Shoulder strap (1) 8 Lens cap (1) 9 Label sheet for cassette (1)

Stick this label on the recorded cassette.

0 21-pin adaptor (1)

DCR-TR7000E/TR7100E/TR V210E: AEP, UK/ TRV310E: AEP, UK/TRV110E: AEP, UK, EE, NE, RU only

!¡ 2-pin conversion adaptor (1)

DCR-TRV110E: E, HK/TR V110: E, HK, BR/ TRV110P/TRV310E: E, HK/TRV310: E, HK/ TRV310P only

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer.

!™ 2-pin conversion adaptor (1)

DCR-TRV110E: JE/TRV310E: JE/ TRV310: JE only

• Abbreviation EE :

East European model

NE :

North European model RU : Russian model HK : Hong Kong model BR : Brazilian model JE : Tourist model

ATTENTION AU COMPOSANT AYANT RAPPORT

LES COMPOSANTS IDENTIFÉS P AR UNE MARQUE ! SUR LES DIAGRAMMES SCHÉMA TIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

À LA SÉCURITÉ!

1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

— 3 —

4. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

5. Check the B+ voltage to see it is at the values specified.

6. Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C during repairing.

• Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering or unsoldering.

Remark

DCR-

TR7000E/

DCR-

TR7000

DCR-

TRV315

DCR-

TRV310E

TR7100E

AEP, UK

US, CND

E, HK, A US,

AEP, UK

NTSC : X251 is 28.6363MHz

PAL : X251 is 28.375MHz

PAL

RMT-814

20×

80×

NTSC

RMT-814

20×

360×

NTSC

RMT-814

20×

360×

CN, JE

PAL

RMT-814

20×

360×

PAL

RMT-814

20×

80×

960H:with IC503 of VC-213 board

®:with Q641-644 of VC-213 board

960H

720H

960H

®:with REC button and Q641-

644 of VC-213 board

2.5 inch : with PD-105 board

3/3.5 inch : with PD-106 board

3.0

89k

3.5

105k

3.5

105k

Color : with VF-126 board

TYPE S

B/W : with VF-129 board

Color

B/W

CD-213

CF-65

CD-212

CF-65

CD-212

CF-63

CD-213

CF-63

CD-213

CF-63

MA-357✕VF-126

MA-355

PD-106

VF-126

PD-106

VF-129

PD-106

VF-129

SE-89

SE-87

PJ-98

PJ-96

DCR-

TRV310/

DCR-

TRV210E

DCR-

TRV210

DCR-

TRV203

DCR-

TRV110E

TRV310P

US, E, HK,

JE, TW

NTSC

PAL

AEP, UK

PAL

US, CND

NTSC

CND

NTSC

E, HK, A US,

CN, JE

PAL

AEP, UK,

EE, NE, RU

PAL

RMT -814

RMT-814

RMT -814

20×

360×

720H

360×

960H

80×

960H

360×

720H

360×

720H

360×

960H

80× (Note)

960H

3.5

105k

TYPE C

B/W

CD-212

CF-63

MA-355

PD-106

VF-129

SE-87

PJ-96

3.0

89k

TYPE S

B/W

CD-213

CF-63

MA-355

PD-106

VF-129

SE-87

PJ-96

3.0

89k

TYPE S

B/W

CD-213

CF-63

MA-355

PD-106

VF-129

SE-87

PJ-96

3.0

89k

TYPE S

B/W

CD-212

CF-63

MA-355

PD-106

VF-129

SE-87

PJ-96

3.0

89k

TYPE S

B/W

CD-212

CF-63

MA-355

PD-106

VF-129

SE-87

PJ-96

2.5

61k

TYPE S

B/W

CD-213

CF-62

MA-354

PD-105

VF-129

SE-86

PJ-95

2.5

84k

TYPE S

B/W

CD-213

CF-62

MA-354

PD-105

VF-129

SE-86

PJ-95

DCR-

TRV110/

TRV110P/

TRV103

US, CND,

E, HK, BR

Model

Table for difference of function

Destination

NTSC

RMT-814

20×

Color system

Remote Commander

Lens

360×

720H

Digital zoom

CCD imager

MONITOR IN

VTR REC

2.5

61k

LCD (size)

LCD (pixel)

— 4 —

TYPE S

B/W

LCD type

View finder

CD-212

CF-62

CD board

CF board

MA-354

PD-105

MA board

PD board

VF-129

SE-86

VF board

SE board

PJ-95

PJ board

Note : EE, NE, RU model is 360×.

CND : Canadian model

EE : East European model

NE : North European model

• Abbreviation

RU : Russian model

HK : Hong Kong model

AUS : Australian model

CN : Chinese model

BR : Brazilian model

JE : Tourist model

TW : Taiwan model

TABLE OF CONTENTS

SERVICE NOTE

1. POWER SUPPLY DURING REPAIRS ····························· 8

2. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT) ································································ 8

SELF-DIAGNOSIS FUNCTION

1. Self-diagnosis Function ······················································ 9

2. Self-diagnosis Display························································ 9

3. Service Mode Display ························································9

3-1. Display Method ··································································9 3-2. Switching of Backup No. ··················································· 9 3-3. End of Display···································································· 9

4. Self-dignosis Code Table·················································· 10

1. GENERAL

Quick Start Guide ······································································1-1 Getting Started··········································································· 1-1

Using this manual ··································································1-1 Checking supplied accessories ··············································1-1 Step 1: Preparing the power supply·······································1-2 Step 2: Inserting a cassette ····················································1-3

Recording – Basics ····································································1-3

Recording a picture································································ 1-3 Checking the recording – END SEARCH/EDITSEARCH/Rec Review····················· 1-5

Playback – Basics ······································································1-5

Playing back a tape ································································1-5 Viewing the recording on TV ················································1-6

Advanced Recording Operations···············································1-6

Photo recording······································································1-6 Using the wide mode ·····························································1-7 Using the fader function ························································1-7 Using special effects – Picture effect·····································1-8 Using special effects – Digital effect····································· 1-8 Using the PROGRAM AE function ·······································1-9 Adjusting the exposure manually ··········································1-9 Focusing manually······························································· 1-10 Inserting a scene ··································································1-10

Advanced Playback Operations···············································1-10

Playing back a tape with picture effects ······························1-10 Playing back a tape with digital effects ·······························1-10 Quickly locating a scene using the zero set memory function ················································································1-11 Searching a recording by date··············································1-11 Searching for a photo – Photo search/Photo scan················1-11

Editing on Other Equipment····················································1-12

Dubbing a tape ·····································································1-12 Recording video or TV programs ········································1-12 Inserting a scene from a VCR··············································1-13

Customizing Y our Camcorder ·················································1-13

Changing the MENU settings ··············································1-13 Resetting the date and time·················································· 1-14

Additional Information ····························································1-14

Digital8 system, recording and playback·····························1-15 Changing the lithium battery in your camcorder ·················1-15 Troubleshooting ···································································1-16 Self-diagnosis display ··························································1-17 Warning indicators and messages ········································1-17 Using your camcorder abroad··············································1-17 Maintenance information and precautions···························1-17

Quick Reference ······································································1-18

Identifying the parts and controls ········································1-18 Quick Function Guide ·························································1-20

2. DISASSEMBLY

2-1. 2.5 INCH LCD Unit, PD-105 Board ·······························2-2 2-2. 3.0/3.5 INCH LCD Unit, PD-106 Board························· 2-3

2-3. F Panel Assembly, Cabinet (R) Assembly ·······················2-4 2-4. MA-354, 355, 357 Board ················································2-4 2-5. Mechanism Deck ·····························································2-5 2-6. EVF Block Assembly ······················································2-6 2-7. VF-129 Board (B/W EVF Model)···································2-7 2-8. VF-126 Board (Color EVF Model) ·································2-8 2-9. Lens Block·······································································2-9 2-10. Mechanism Deck, VC-213, DD-117,

PJ-95, 96, 98 Boards······················································2-10 2-11. CF-65 Board (TR Model) ··············································2-12 2-12. CF-62 Board (2.5 INCH LCD Model) ··························2-12 2-13. CF-63 Board (3.0/3.5 INCH LCD Model) ····················2-12 2-14. Circuit Boards Location ················································2-13 2-15. Flexible Boards Location ··············································2-14

3. BLOCK DIAGRAMS

3-1. Overall Block Diagram (1) ··············································3-1

Overall Block Diagram (2)··············································3-6 3-2. Power Block Diagram (1)················································3-9

Power Block Diagram (2)··············································3-13

4. PRINTED WIRING BOARDS AND

SCHEMATIC DIAGRAMS

4-1. Frame Schematic Diagram-1···········································4-1

Frame Schematic Diagram-2··········································· 4-5 4-2. Printed Wiring Boards and Schematic Diagrams ············4-9

• CD-212 (CCD Imager) Printed Wiring Board and Schematic Diagram ·······································4-10

• CD-213 (CCD Imager) Printed Wiring Board and Schematic Diagram ·······································4-13

• VC-213 (Camera Processor)(1/13)

Schematic Diagram .......................................4-15

• VC-213 (Y/C Processor)(2/13) Schematic Diagram ·······································4-18

• VC-213 (Lens Motor Drive)(3/13) Schematic Diagram ·······································4-21

• VC-213 (I/O SEL, IR, BBI)(4/13) Schematic Diagram ·······································4-25

• VC-213 (VFD)(5/13) Schematic Diagram ·······································4-29

• VC-213 (SFD, TFD, LIP)(6/13) Schematic Diagram ·······································4-33

• VC-213 (TRX, TRF , TRW)(7/13) Schematic Diagram ·······································4-35

• VC-213 (8mm PB RF AMP, D/A Converter)(8/13) Schematic Diagram ·······································4-40

• VC-213 (8mm AFM Processor)(9/13) Schematic Diagram ·······································4-43

• VC-213 (8mm Mechanism Control)(10/13) Schematic Diagram ·······································4-49

• VC-213 (DV Mechanism Control)(11/13) Schematic Diagram ·······································4-51

• FP-249 (S/T Reel Sensor), FP-356 (Top Sensor),

FP-355 (Tape LED) Flexible Board ····························4-55

• VC-213 (Servo)(12/13) Schematic Diagram ·······································4-56

• VC-213 (HI Control)(13/13) Schematic Diagram ·······································4-59

• VC-213 (Camera Processor, Y/C Processor, Lens Motor

Drive, IN/OUT Select, IR Transmitter, Base Band Input, VFD, SFD, TFD, LIP, TRX, TRF, TRW, 8mm PB RF AMP, D/A Converter, 8mm AFM Processor, 8mm Mechanism Control, DV Mechanism Control, Servo, HI Control)

Printed Wiring Board ····································4-65

— 5 —

• SE-86/87/89 (Steady Shot), PJ-95/96/98 (AV IN/OUT) Printed Wiring Boards···································4-70

• SE-86/87/89 (Steady Shot), PJ-95/96/98 (AV IN/OUT) Schematic Diagrams ·····································4-73

• MA-354/355/357 (Stereo MIC AMP) Printed Wiring Board ····································4-75

• MA-354/355/357 (Stereo MIC AMP) Schematic Diagram ·······································4-77

• CF-62 (User Control)

Printed Wiring Board ....................................4-80

• CF-62 (User Control) Schematic Diagram ·······································4-83

• CF-63 (User Control)

Printed Wiring Board ....................................4-87

• CF-63 (User Control) Schematic Diagram ·······································4-91

• CF-65 (User Control)

Printed Wiring Board ....................................4-96

• CF-65 (User Control) Schematic Diagram ·······································4-99

• PD-105 (RGB Decoder, LCD, Timing Generator,

Back Light Drive)

Printed Wiring Board (2.5 INCH LCD Model)······························ 4-103

• PD-106 (RGB Decoder, LCD, Timing Generator,

Back Light Drive)

Printed Wiring Board (3.0/3.5 INCH LCD Model)························4-105

• PD-105 (RGB Decoder, LCD)(1/2) Schematic Diagram ·····································4-109

• PD-106 (RGB Decoder, LCD)(1/2) Schematic Diagram ·····································4-111

• PD-105, 106 (RGB Decoder, LCD)(2/2) Schematic Diagram ·····································4-114

• VF-129 (B/W EVF) Printed Wiring Board (B/W EVF Model) ...4-117

• VF-129 (B/W EVF) Schematic Diagram (B/W EVF Model)······ 4-118

• VF-126 (Color EVF) Printed Wiring Board (Color EVF Model) ..4-121

• VF-126 (Color EVF) Schematic Diagram (Color EVF Model) ····4-123

• DD-117 (DC/DC Converter) Printed Wiring Board ··································4-129

• DD-117 (DC/DC Converter) Schematic Diagram ·····································4-131

• FK-8500, SS-8500 (Control Switch Block) Schematic Diagram ·····································4-138

5. ADJUSTMENTS

1. Before starting adjustment···············································5-1 1-1. Adjusting items when replacing main parts and boards·· 5-2 5-1. CAMERA SECTION ADJUSTMENT··························· 5-4 1-1. Preparations before Adjustment (Camera Section) ·········5-4 1-1-1.List of Service Tools ························································5-4 1-1-2.Preparations ····································································· 5-5 1-1-3.Precaution ········································································5-9

1. Setting the Switch····························································5-9

2. Order of Adjustments ······················································5-9

3. Subjects ···········································································5-9 1-2. Initialization of C, D, E, F Page Data····························5-10 1-2-1.Initialization of C Page Data ·········································5-10

1. Initializing the C Page Data···········································5-10

2. Modification of C Page Data········································· 5-10

3. C Page Table ··································································5-10 1-2-2.Initialization of D Page Data ········································· 5-12

1. Initializing the D Page Data ··········································5-12

2. Modification of D Page Data·········································5-12

3. D Page Table··································································5-12 1-2-3.Initialization of E, F Page Data ·····································5-14

1. Initializing the E, F Page Data·······································5-14

2. Modification of E, F Page Data·····································5-14

3. F Page Table ··································································5-14

4. E Page Table ··································································5-18 1-3. Camera System Adjustments·········································5-21

1. HALL Adjustment ·························································5-21

2. Flange Back Adjustment (Using Minipattern Box)·······5-22

3. Flange Back Adjustment (Using Flange Back Adjustment Chart Subject More Than 500m Away)·························5-23

3-1. Flange Back Adjustment (1) ··········································5-23 3-2. Flange Back Adjustment (2) ··········································5-23

4. Flange Back Check························································5-24

5. Picture Frame Setting ····················································5-24

6. AGC Gain Calibration Adjustment ·······························5-25

7. Color Reproduction Adjustment····································5-26

8. IRIS IN/OUT Adjustment ·············································5-27

9. Auto White Balance Standard Data Input ·····················5-28

10. Auto White Balance Adjustment ···································5-28

11. White Balance Check ····················································5-29

12. Angular Velocity Sensor Sensitivity Data Check ··········5-30

1-4. Color Electronic Viewfinder System Adjustments

(DCR-TR7000/TR7000E/TR7100E/TRV315)··············5-31

1. EVF Initial Data Input ···················································5-31

2. VCO Adjustment (VF-126 board)·································5-32

3. Bright Adjustment (VF-126 board) ·······························5-32

4. Contrast Adjustment (VF-126 board)····························5-33

5. Backlight Consumption Current Adjustment (VF-126 board)······························································5-33

6. White Balance Adjustment (VF-126 board)··················5-34

1-5. Monochrome Electronic Viewfinder System Adjustments

(DCR-TRV103/TRV110/TRV110E/TRV110P/TRV203/ TRV210/TRV210E/TRV310/TRV310E/TRV310P)······5-35

1-5-1.Horizontal Slant Check ·················································5-35 1-5-2.Centering Adjustment····················································5-35 1-5-3.Focus Adjustment ··························································5-35 1-5-4.Aberration Adjustment ··················································5-36 1-5-5.Horizontal Amplitude Adjustment (VF-129 board) ······5-36 1-5-6.Vertical Amplitude Adjustment (VF-129 board) ··········· 5-37 1-5-7.Brightness Adjustment (VF-129 Board)························ 5-37 1-5-8.Horizontal Amplitude, V ertical Amplitude,

Focus Check ··································································5-37

1-6. LCD System Adjustments

(DCR-TRV103/TRV110/TRV110E/TRV110P/TRV203/ TRV210/TRV210E/TRV310/TRV310E/TRV310P/ TRV315) ········································································5-38

1. LCD Initial Data Input (1)·············································5-38

2. LCD Initial Data Input (2)·············································5-38

3. VCO Adjustment (PD-105/106 board)··························5-39

4. D range Adjustment (PD-105/106 board) ·····················5-39

5. Bright Adjustment (PD-105/106 board)························5-40

6. Contrast Adjustment (PD-105/106 board)·····················5-40

7. V-COM Level Adjustment (PD-105/106 board) ···········5-41

8. Color Adjustment (PD-105/106 board) ·························5-41

9. V-COM Adjustment (PD-105/106 board) ·····················5-42

10. White Balance Adjustment (PD-105/106 board)···········5-42

5-2. MECHANISM SECTION ADJUSTMENT··················5-43 2-1. Hi8/Standard 8mm Mode ··············································5-43 2-1-1.Operating Without Cassette ···········································5-43 2-1-2.Tape Path Adjustment····················································5-43

1. Preparations for Adjustment··········································5-43

2-2. Digital8 Mode································································5-44 2-2-1.How to Enter Record Mode Without Cassette ··············5-44 2-2-2.How to Enter Playback Mode Without Cassette ···········5-44 2-2-3.Overall Tape Path Check ···············································5-44

— 6 —

1. Recording of the tape path check signal························5-44

2. Tape path check ·····························································5-44 5-3. VIDEO SECTION ADJUSTMENT······························5-45 3-1. Preparations Before Adjustments ··································5-45 3-1-1.Equipment to Required·················································· 5-45 3-1-2.Precautions on Adjusting···············································5-46 3-1-3.Adjusting Connectors ···················································· 5-47 3-1-4.Connecting the Equipment ············································5-47 3-1-5.Alignment Tape ·····························································5-48 3-1-6.Input/Output Level and Impedance ·······························5-49 3-2. System Control System Adjustment······························5-50

1. Initialization of C, D, E, F Page Data····························5-50

2. Battery End Adjustment (VC-213 board)······················5-50 3-3. Servo and RF System Adjustments ·······························5-51

1. PLL f0 & LPF f0 Pre-adjustment (VC-213 board) ········· 5-51

2. Switching Position Adjustment (VC-213 board)··········· 5-51

3. AGC Center Level Adjustment (VC-213 board) ···········5-52

4. APC & AEQ Adjustment (VC-213 board) ···················· 5-52

5. PLL f0 & LPF f0 Final Adjustment (VC-213 board)······5-53

6. Hi8/standard 8mm Switching Position Adjustment (VC-214 board) ·····························································5-53

7. CAP FG Offset Adjustment (VC-213 board) ················5-54

3-4. Video System Adjustments ············································5-55 3-4-1.Video System Adjustments············································ 5-55

1. 27 MHz/36 MHz Origin Oscillation Adjustment (VC-213 board) ·····························································5-55

2. Chroma BPF f0 Adjustment (VC-213 board) ················5-55

3. S VIDEO OUT Y Level Adjustment (VC-213 board)···5-56

4. S VIDEO OUT Chroma Level Adjustment (VC-213 board) ·····························································5-56

5. VIDEO OUT Y, Chroma Level Adjustment (VC-213 board) ·····························································5-57

6. Hi8/standard 8mm 14 MHz Origin Oscillation Adjustment (VC-213 board)········································· 5-57

7. BBI PLL Adjustment (VC-213 board) ··························5-58

8. Hi8/standard 8mm Y OUT Level Adjustment (VC-213 board) ·····························································5-58

9. Hi8/standard 8mm Chroma Level Adjustment (VC-213 board) ·····························································5-59

10. Hi8/standard 8mm AFC f (VC-213 board) ·····························································5-59

11. Hi8/standard 8mm RP Filter f0 Adjustment (VC-213 board) ·····························································5-60

3-4-2.BIST Check ···································································5-61

1. Playback System Check ················································5-61

1-1. Preparation for Playback ···············································5-61 1-2. IC104 (TRX) BIST (PB) Check ····································5-61 1-3. IC302 (TFD) BIST (PB) Check ····································5-61 1-4. IC301 (SFD) BIST (PB) Check·····································5-61 1-5. IC351 (VFD) BIST (PB) Check ····································5-62

2. Recording System Check ··············································5-64

2-1. Preparations for Recording············································5-64 2-2. IC351 (VFD) BIST (REC) Check ································· 5-64 2-3. IC301 (SFD) BIST (REC) Check··································5-64 2-4. IC302 (TFD) BIST (REC) Check ·································5-64 2-5. IC104 (TRX) BIST (REC) Check ································· 5-65 3-5. IR Transmitter Adjustments···········································5-66

1. IR Video Carrier Frequency Adjustment (VC-213 board) ·····························································5-66

2. IR Video Deviation Adjustment (VC-213 board) ·········· 5-66

3. IR Audio Deviation Adjustment (VC-213 board) ·········5-67

3-6. Audio System Adjustment·············································5-68

1. Hi8/standard 8mm AFM BPF f0 Adjustment (VC-213 board) ·····························································5-68

2. Hi8/standard 8mm AFM 1.5 MHz Deviation Adjustment (VC-213 board) ·····························································5-69

3. Hi8/standard 8mm AFM 1.7 MHz Deviation Adjustment (VC-213 board) ·····························································5-69

Adjustment

4. Digital8 Playback Level Check ·····································5-69

5. Overall Level Characteristics Check ·····························5-69

6. Overall Distortion Check···············································5-69

7. Overall Noise level Check············································· 5-70

8. Overall Separation Check·············································· 5-70 5-4. SERVICE MODE ··························································5-71 4-1. Adjustment Remote Commander ··································5-71

1. Using the Adjustment Remote Commander··················5-71

2. Precautions Upon Using the Adjustment Remote Commander ···································································5-71

4-2. Data Process ··································································5-72 4-3. Service Mode·································································5-73

1. Setting the Test Mode ···················································· 5-73

2. Emergence Memory Address ········································5-73

2-1. C Page, Emergence Memory Address ···························5-73 2-2. F Page, Emergence Memory Address ···························5-74 2-3. EMG Code (Emergency Code) ·····································5-74 2-4. MSW Code ····································································5-75

3. Bit V alue Discrimination ···············································5-76

4. Input/Output Check ·······················································5-76

5. LED, LCD (Display Window) Check ···························5-76

6. Record of Use Check····················································· 5-77

7. Switch Check (1) ··························································· 5-77

8. Switch Check (2) ··························································· 5-78

9. Audio (L) Jack Check····················································5-78

10. Headphone Jack Check ·················································5-78

6. REPAIR PARTS LIST

6-1. Exploded Vie ws ·······························································6-1 6-1-1.Front Panel (N) and Battery Panel (P) Block Assembly ·6-1 6-1-2.Cabinet (R) Block Assembly (TR Model)·······················6-2 6-1-3.Cabinet (R) Block Assembly (2.5 INCH LCD Model) ···6-3 6-1-4.Cabinet (R) Block Assembly

(3.0/3.5 INCH LCD Model) ············································6-4

6-1-5.Cabinet (L) Block and Main Boards Assembly··············· 6-5 6-1-6.LCD Block Assembly (2.5 INCH LCD Model) ··············6-6 6-1-7.LCD Block Assembly (3.0/3.5 INCH LCD Model) ········6-7 6-1-8.B/W EVF Block Assembly·············································· 6-8 6-1-9.Color EVF Block Assembly············································6-9 6-1-10. Lens Block Assembly ················································· 6-10 6-1-11. Cassette Compartment Assembly ·······························6-11 6-1-12. LS Chassis Assembly··················································6-12 6-1-13. Mechanism Chassis Assembly····································6-13 6-2. Electrical Parts List ·······················································6-14

* The color reproduction frame is shown on page 323.

— 7 —

SERVICE NOTE

1. POWER SUPPLY DURING REPAIRS

In this unit, about 10 seconds after power is supplied (8.4V) to the battery terminal using the service power cord (J-6082-223-A), the power is shut off so that the unit cannot operate. This following two methods are av ailable to pre vent this. Take note of which to use during repairs.

Method 1.

Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the remote commander switch to the “ADJ” side.

Method 2.

Press the battery switch of the battery terminal using adhesive tape, etc.

Method 3.

Battery terminal

‘

Use the DC IN terminal. (Use the AC power adaptor.)

DC IN terminal

Battery SIG terminal

2. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1 Refer to 2-1. to remove the front panel assembly. 2 Refer to 2-1. to remove the cabinet (R) assembly. 3 Refer to 2-1. to remove the battery panel assembly. 4 Refer to 2-1. to remove the cabinet (L) assembly. 5 Disconnect CN901 of VC-213 board. 6 Add +5V from the DC POWER SUPPLY and unload with a

pressing the cassette lid.

Battery switch

Battery terminal

’

Let go your hold the cassette lid and rise the cassette compartment to take out a cassette.

Pull the timing belt in the direction of

arrow the cassette lid (take care not to damage) to adjust the bending of a tape.

with a pincette while pressing

Pincette

Timing belt

Press the cassette lid to rise the cassette compartment

[DC power supply]

(+5V)

Loading motor

Timing belt

Disconnect CN901 of VC-213 board.

Adjust the bending of a tape

— 8 —

SELF-DIAGNOSIS FUNCTION

1. Self-diagnosis Function

When problems occur while the unit is operating, the self-diagnosis function starts working, and displays on the viewfinder or Display window what to do. This function consists of two display; selfdiagnosis display and service mode display. Details of the self-diagnosis functions are provided in the Instruction manual.

Viewfinder Display window

C : 3 1 : 1 1

Repaired by:

C : Corrected by customer H : Corrected by dealer E : Corrected by service

engineer

Blinks at 3.2Hz

Indicates the appropriate step to be taken. E.g.

31 ....Reload the tape.

32 ....Turn on power again.

3 1

Block

1 1

C : 3 1 : 11

Refer to page 10 and 11. Self-diagnosis Code Table.

2. Self-diagnosis Display

When problems occur while the unit is operating, the counter of the viewfinder or Display window shows a 4-digit display consisting of an alphabet and numbers, which blinks at 3.2 Hz. This 5-character display indicates the “repaired by:”, “block” in which the problem occurred, and “detailed code” of the problem.

Display window

Detailed Code

3. Service Mode Display

The service mode display shows up to six self-diagnosis codes shown in the past.

3-1. Display Method

While pressing the “STOP” key, set the switch from OFF to “VTR or PLAYER”, and continue pressing the “STOP” key for 5 seconds continuously. The service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.

Viewfinder

[3] C : 3 1 : 1 1

Lights up

[3]

Backup No.

Order of previous errors

C : 3 1 : 1 1

Self-diagnosis Codes

3-2. Switching of Backup No.

By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.) [1] : Occurred first time [4] : Occurred fourth time [2] : Occurred second time [5] : Occurred fifth time [3] : Occurred third time [6] : Occurred the last time

Display window

3 C : 3 1 : 11

Control dial

3-3. End of Display

Turning OFF the power supply will end the service mode display.

Note: The “self-diagnosis display” data will be back ed up by the coin-type lithium battery (CF-62/63/65 board BH001). When

this coin-type lithium battery is disconnected, the “self-diagnosis display” data will be lost by initialization.

— 9 —

4. Self-diagnosis Code Table

Self-diagnosis Code

Block

Function

Repaired by:

Detailed

Code

00 00 00

11 20

21 22 23 30 31 40 41 42 43 44

Symptom/State

Condensation. Video head is dirty. Non-standard battery is used. LOAD direction. Loading does not

complete within specified time UNLOAD direction. Loading does not

complete within specified time T reel side tape slacking when unloading S reel

side tape slacking when unloading T reel fault. S reel fault. FG fault when starting capstan. FG fault during normal capstan operations. FG fault when starting drum. PG fault when starting drum. FG fault during normal drum operations. PG fault during normal drum operations. Phase fault during normal drum operations. LOAD direction loading motor time-

out. UNLOAD direction loading motor

time-out. T reel side tape slacking when

unloading. S reel side tape slacking when

unloading. T reel fault.

S reel fault.

FG fault when starting capstan. FG fault during normal capstan

operations. FG fault when starting drum.

PG fault when starting drum. FG fault during normal drum

operations. PG fault during normal drum

operations. Phase fault during normal drum

operations.

Correction

Remove the cassette, and insert it again after one hour. Clean with the optional cleaning cassette. Use the InfoLITHIUM battery.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Load the tape again, and perform operations from the beginning. Remove the battery or power cable, connect, and perform

operations from the beginning. Remove the battery or power cable, connect, and perform

operations from the beginning.

— 10 —

Self-diagnosis Code

Block

Function

Repaired by:

Detailed

Code

Symptom/State

Difficult to adjust focus (Cannot initialize focus.)

Zoom operations fault (Cannot initialize zoom lens.)

Handshake correction function does not work well. (With pitch angular velocity sensor output stopped.)

Handshake correction function does not work well. (With yaw angular velocity sensor output stopped.)

Correction

Inspect the lens block focus reset sensor (Pin !™ of CN551 of VC213 board) when focusing is performed when the control dial is rotated in the focus manual mode and the focus motor drive circuit (IC551 of VC-213 board) when the focusing is not performed.

Note: Use the remote commander RM-95 only for the model without the

focus dial.

Inspect the lens block zoom reset sensor (Pin !¢ of CN551 of VC213 board) when zooming is performed when the zoom lens is operated and the zoom motor drive circuit (IC551 of VC-213 board) when zooming is not performed.

Inspect pitch angular velocity sensor (SE651 of SE-86/87/89 board) peripheral circuits.

Inspect yaw angular velocity sensor (SE652 of SE-86/87/89 board) peripheral circuits.

— 11 —