Sony CCD-TRV21 Owner’s Manual

B MECHANISM

Video8

OPERATION

MANUAL

A18

m MECHANISMDECK

CONTENTS

1. Main parts layout diagram ....................................................................... 4

2. Operation of main parts ............................................................................ 5

3. Operation of each part .............................................................................. 6

3-1. Driving of LS chassis ......................................................................................... 6

3-2. Driving of pinch roller ....................................................................................... 8

3-3. Driving of tension regulator and TG1 ............................................................ 10

3-4. Driving of S reel and S ratchet ....................................................................... 12

3-5. Driving of T ratchet and T soft gear .............................................................. 14

4. Operation in each mode .......................................................................... 17

4-1. Cassette IN =====:=_ STOP ............................................................................. 17

4-2.

STOP _ PB ............................................................................................ 23

4-3.

STOP =:=:===_ REC ......................................................................................... 27

4-4.

STOP ====:==_ FF ............................................................................................ 31

4-5.

STOP =====_ REWIND ................................................................................ 35

4-6.

PB ===:==_ CUE .............................................................................................. 38

4-7.

PB ==:===_ REVIEW ...................................................................................... 40

4-8.

PB _ PAUSE ......................................................................................... 42

4-9.

STOP ===:=:=_ EJECT .................................................................................... 45

1. Main parts layout diagram

REC proof switch (S001)

Sensor

Capstan motor

(M902)

Cassette down switch

(S002)

Pinch roller

Drum (M901)

Loading motor
(M903)

T reel

LED

S reel

Sensor S

Gooseneck gear

Rotary encoder
(S901)

Fig. 1-1

2. Operation of main parts

Loading motor (M903) rotates. ]

[ Worm shaft and gear A rotates. [

[ Rotary encoder rotates. [

moves in the direction of
Tension regulator plate 1

arrow.

Worm

Gear

Rotary encoder

Tension regulator

plate 1

[ Cam gear rotates. [

arrow.

M slider slides in the direction of [

direction of arrow.

Pinch press plate moves in the ]

Loading motor

GL slider

f

direction of arrow.

I L arm moves in the [

direction of arrow.

Pinch press plate

GL arm

Cam gear

LS arm

M slider

Fig. 2-1

3. Operation of each part

3-1. Driving of LS chassis

1

LS chassis moves.

I

TG4 moves in the |
direction of arrow.

Claws on stoppers S and T
are released from locked

position and guide S (TG2)
and guide T (TG3) move in

the direction of arrow.

LS arm moves.

r

i

J

Cam gear rotates.

I M slider in

direction after first
slightly moving in O

direction.

Pinch press plate moves
inOdirection after first
slightly moving int_)

direction.

I

TG1 moves m the |
direction of arrow.

I

1

!

I

®moves

GL arm moves in the
direction of arrow.

I

T (TG3) further move in
Guide S (TG2) and guide

the direction of arrow.

Pinch roller moves in theJ

direction of arrow.

!

GL slider moves in the
direction of arrow.

I

GL arm

Cam gea=

GL slider

@

•Pinch press plate

TG1

LS arm

Fig. 3-1

Guide T

(TG3)

Guide S
(TG2)

uide rail

Stopper T

M slider

Pinch roller

arm

Stopper S

IViewed from the rear. I

Fig. 3-2 LS chassis assembly

3-2. Driving of pinch roller

M slider moves in the
direction of arrow.

!

I

Pinch press plate moves in
the direction of arrow (_).

,!

Shaft of pinch roller arm is
pushed with pinch press
plate at!_)portion.

Pinch roller moves in the
direction of arrow to be

pressed with capstan shaft.

I

M slider

Pinch press plate

Fig. 3-3

Shaft of pinch roller

"-Torsion spring (pinch)

press plate

Fig. 3-4

3-3. Driving of tension regulator and TG1

Rotary encoder rotates. [

TG1 moves in the direction of I
arrowf_)as LS chassis moves.

TG1 shaft touches on!_)portion, I
then it moves in the direction of

arrow_.

TG1 further moves in the [
direction of arrow(fi).

TG1 moves in(_)direction I
shortly after it moves int_)
direction.

|

I

1

!

I

!

I

Tension regulator plates 2

and 1 move in@direction, i

!

Rotary encoder further ]
rotates and tension [

regulator plates 2 and 1 [
move in(_)direction shortly I

after they move in(_ ]
direction. [

!

I Tension regulator plates 2 I

and 1 move inl_)direction.

I

I

|

!"

I

TG1 moves inl_)direction. I

Tension reg
plate 2

Tension regulator
plate 1

Rotary encoder

(S901)

O

slider

Fig. 3-5

TG1 _1_(_ TG1 moves in the direction of

arrow(_as LS chassis moves.

Tension regulator band

regulator

®

plate 2

"-Tension regulator

plate 1

Fig. 3-6

3-4. Driving of S reel and S ratchet

I M slider moves in the direction of arrow [

as cam gear rotates.

S ratchet shaft touches M slider onl_
portion, then S ratchet moves in the
direction of arrowl_).

S ratchet release plate moves in the

1

direction of arrowt_).

* With this operation of S reel

the brake is released.

I

I

,L